Date: Tue, 31 Aug 1999 09:37:27 -0600 (MDT) From: "Kenneth D. Merry" <ken@kdm.org> To: andreas@klemm.gtn.com (Andreas Klemm) Cc: scsi@FreeBSD.ORG Subject: Re: 3.2-STABLE: SCB 0x7 - timed out in datain phase, SEQADDR == 0x10e Message-ID: <199908311537.JAA17906@panzer.kdm.org> In-Reply-To: <19990831171005.A2252@titan.klemm.gtn.com> from Andreas Klemm at "Aug 31, 1999 05:10:05 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Andreas Klemm wrote... > What might cause this ? > > (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10e > (da0:ahc0:0:0:0): BDR message in message buffer > (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10d > (da0:ahc0:0:0:0): no longer in timeout, status = 34b > ahc0: Issued Channel A Bus Reset. 10 SCBs aborted It usually indicates a cabling or termination problem. If the message is "timed out in {datain,dataout,command} phase", the cause is often the same -- cabling or termination. If you see a "timed out while idle" message, that often points to buggy drive firmware, but in some rare cases it can just mean that there's a timeout set too short. In any case, check your cabling and termination. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199908311537.JAA17906>