Date: Thu, 12 Mar 1998 14:12:10 -0800 From: Parag Patel <parag@cgt.com> To: <freebsd-stable@FreeBSD.ORG> Subject: Typo bug in 2.2.6-BETA kernel bootup messages? Message-ID: <199803122211.OAA18471@mail2.sirius.com>
next in thread | raw e-mail | index | archive | help
When booting 2.2.6-BETA on my PII system, the kernel reports "changing
root device to sd0s3a". However, root is really on sd0s2a, and fstab is
so configured. It boots and runs just fine so I suspect the kernel error
message is off by one somehow but it really knows what the real root
device is.
The disk sd0 has only two slices - the 1st is a small DOS (for System
Commander) and the second is FreeBSD (the rest of the 4Gb disk). Slices
3 and 4 are empty/not set. / is sd0s2a, /usr is on sd0s2e, and 128Mb
swap is on sd0s2b. These are the only BSD partitions on the disk.
There is only a single SCSI disk on the system, and FreeBSD is not
configured to see the single IDE drive at all (which has no BSD
partitions anyway).
Latest cvsup update occurred just before 12 Mar 01:38:01 AM PST, and I'm
just now booted and running that update. Appended is the output from
/var/log/messages. Please let me know what additional information is
needed - I'd be happy to provide it.
Thank-you for all your efforts.
-- Parag Patel
mount:
/dev/sd0s2a on / (local)
/dev/sd0s2e on /usr (local)
procfs on /proc (local)
/var/log/messages:
Mar 12 13:58:19 pinhead /kernel: Copyright (c) 1992-1998 FreeBSD Inc.
Mar 12 13:58:19 pinhead /kernel: Copyright (c) 1982, 1986, 1989, 1991,
1993
Mar 12 13:58:19 pinhead /kernel: The Regents of the University of
California. All rights reserved.
Mar 12 13:58:19 pinhead /kernel:
Mar 12 13:58:19 pinhead /kernel: FreeBSD 2.2.6-BETA #0: Wed Mar 11
12:15:13 PST 1998
Mar 12 13:58:19 pinhead /kernel:
root@pinhead.parag.codegen.com:/usr/src/sys/compile/PINHEAD2
Mar 12 13:58:19 pinhead /kernel: CPU: Pentium Pro (300.68-MHz 686-class
CPU)
Mar 12 13:58:19 pinhead /kernel: Origin = "GenuineIntel" Id = 0x634
Stepping=4
Mar 12 13:58:19 pinhead /kernel:
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,MMX>
Mar 12 13:58:19 pinhead /kernel: real memory = 134217728 (131072K bytes)
Mar 12 13:58:19 pinhead /kernel: avail memory = 127594496 (124604K bytes)
Mar 12 13:58:19 pinhead /kernel: Probing for devices on PCI bus 0:
Mar 12 13:58:19 pinhead /kernel: chip0 <generic PCI bridge (vendor=8086
device=7180 subclass=0)> rev 3 on pci0:0:0
Mar 12 13:58:19 pinhead /kernel: chip1 <generic PCI bridge (vendor=8086
device=7181 subclass=4)> rev 3 on pci0:1:0
Mar 12 13:58:20 pinhead /kernel: chip2 <Intel 82371AB PCI-ISA bridge> rev
1 on pci0:4:0
Mar 12 13:58:20 pinhead /kernel: chip3 <Intel 82371AB IDE interface> rev
1 on pci0:4:1
Mar 12 13:58:20 pinhead /kernel: chip4 <Intel 82371AB USB interface> rev
1 int d irq 12 on pci0:4:2
Mar 12 13:58:20 pinhead /kernel: chip5 <Intel 82371AB Power management
controller> rev 1 on pci0:4:3
Mar 12 13:58:20 pinhead /kernel: ahc0 <Adaptec aic7880 Ultra SCSI host
adapter> rev 0 int a irq 12 on pci0:6:0
Mar 12 13:58:20 pinhead /kernel: ahc0: aic7880 Wide Channel, SCSI Id=7,
16 SCBs
Mar 12 13:58:20 pinhead /kernel: ahc0 waiting for scsi devices to settle
Mar 12 13:58:20 pinhead /kernel: (ahc0:0:0): "IBM DCAS-34330W S65A" type
0 fixed SCSI 2
Mar 12 13:58:20 pinhead /kernel: sd0(ahc0:0:0): Direct-Access 4134MB
(8467200 512 byte sectors)
Mar 12 13:58:20 pinhead /kernel: (ahc0:1:0): "WANGTEK 6130-HS 4B18" type
1 removable SCSI 2
Mar 12 13:58:20 pinhead /kernel: st0(ahc0:1:0): Sequential-Access density
code 0x13, drive empty
Mar 12 13:58:20 pinhead /kernel: de0 <Digital 21140 Fast Ethernet> rev 18
int a irq 10 on pci0:11:0
Mar 12 13:58:20 pinhead /kernel: de0: SMC 9332DST 21140 [10-100Mb/s] pass
1.2
Mar 12 13:58:20 pinhead /kernel: de0: address 00:00:c0:7e:df:e4
Mar 12 13:58:20 pinhead /kernel: de0: enabling 10baseT port
Mar 12 13:58:20 pinhead /kernel: Probing for devices on PCI bus 1:
Mar 12 13:58:20 pinhead /kernel: vga0 <VGA-compatible display device> rev
0 int a irq 11 on pci1:0:0
Mar 12 13:58:20 pinhead /kernel: Probing for PnP devices:
Mar 12 13:58:20 pinhead /kernel: CSN 1 Vendor ID: CTL00e4 [0xe4008c0e]
Serial 0x08de2f0a
Mar 12 13:58:20 pinhead /kernel: pcm1 (SB16pnp <SB16 PnP> sn 0x08de2f0a)
at 0x220 irq 5 drq 1 flags 0x15 id 13
Mar 12 13:58:20 pinhead /kernel: Probing for devices on the ISA bus:
Mar 12 13:58:20 pinhead /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Mar 12 13:58:21 pinhead /kernel: sc0: VGA color <16 virtual consoles,
flags=0x0>
Mar 12 13:58:21 pinhead /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa
Mar 12 13:58:21 pinhead /kernel: sio0: type 16550A
Mar 12 13:58:21 pinhead /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Mar 12 13:58:21 pinhead /kernel: sio1: type 16550A
Mar 12 13:58:21 pinhead /kernel: lpt0 at 0x378-0x37f irq 7 on isa
Mar 12 13:58:21 pinhead /kernel: lpt0: Interrupt-driven port
Mar 12 13:58:21 pinhead /kernel: lp0: TCP/IP capable interface
Mar 12 13:58:21 pinhead /kernel: pcm0 not found at 0xffffffff
Mar 12 13:58:21 pinhead /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Mar 12 13:58:21 pinhead /kernel: fdc0: FIFO enabled, 8 bytes threshold
Mar 12 13:58:21 pinhead /kernel: fd0: 1.44MB 3.5in
Mar 12 13:58:21 pinhead /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa
Mar 12 13:58:21 pinhead /kernel: wdc0: unit 0 (atapi): <TOSHIBA CD-ROM
XM-6202B/1108>, removable, accel, ovlap, dma, iordis
Mar 12 13:58:21 pinhead /kernel: wcd0: 5512Kb/sec, 256Kb cache, audio
play, 255 volume levels, ejectable tray
Mar 12 13:58:21 pinhead /kernel: wcd0: no disc inside, unlocked
Mar 12 13:58:21 pinhead /kernel: npx0 flags 0x1 on motherboard
Mar 12 13:58:21 pinhead /kernel: npx0: INT 16 interface
Mar 12 13:58:21 pinhead /kernel: joy0 at 0x201 on isa
Mar 12 13:58:21 pinhead /kernel: joy0: joystick
Mar 12 13:58:21 pinhead /kernel: changing root device to sd0s3a
Mar 12 13:58:22 pinhead named[84]: starting. named 4.9.6-REL Thu Mar 12
12:13:29 PST 1998
parag@pinhead.parag.codegen.com:/usr/obj/usr/src/usr.sbin/named
Mar 12 13:58:22 pinhead named[85]: Ready to answer queries.
Mar 12 13:58:23 pinhead lpd[117]: restarted
Mar 12 13:59:10 pinhead papd[290]: restart (1.4b2)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803122211.OAA18471>