Date: Wed, 19 Jan 2000 18:10:02 -0800 (PST) From: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> To: freebsd-bugs@FreeBSD.org Subject: Re: misc/16208: ps/2 mouse problem Message-ID: <200001200210.SAA62503@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR misc/16208; it has been noted by GNATS.
From: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
To: p.sikkema@hccnet.nl
Cc: freebsd-gnats-submit@freebsd.org,
yokota@zodiac.mech.utsunomiya-u.ac.jp
Subject: Re: misc/16208: ps/2 mouse problem
Date: Thu, 20 Jan 2000 11:05:47 +0900
>>Number: 16208
>>Category: misc
>>Synopsis: ps/2 mouse problem
[...]
>>Release: 3.2
>>Organization:
>>Environment:
>freebsd 3.2 release #0
>>Description:
>I use a abit bp6 dual celeron motherboard with a agp graphics card (intel 740
>chipset).
>Under freebsd the p/s2 mouse won't run, serial mouse does.
>With the XBF-i740 glibc 1.001 (linux) Xwindows runs well, exept for the mouse.
> Neither serial, nor ps/2.
>In all cases the pointer moves far to fast and ends in the upper corners.
Hmm, you seem to be saying the serial mouse runs, but isn't working in
X. What does this mean?
In any case, would you provide the following informatin so that I can
diagnose your problem?
1. The brand and model of your PS/2 mouse and serial mouse.
2. /etc/rc.conf
3. /var/run/dmesg.boot after starting the system with the PS/2 mouse.
4. The "Pointer" section of your XF86Config (it's usually in /etc)
If your serial mouse is relatively old, you may need to tweak a bit.
We need to carry out some tests after you send us the above
information.
In general, the following quick steps will set up the mouse and
work for many people.
- When you connect a PS/2 mouse to your system, put the following lines
in /etc/rc.conf.
moused_enable="YES"
mouse_port="/dev/psm0"
mouse_type="auto"
mouse_flags=""
After editting /etc/rc.conf, reboot the system.
Then modify your "Pointer" section in XF86Config so that it looks:
Section "Pointer"
Protocol "MouseSystems"
Device "/dev/sysmouse"
EndSection
(As your X server is a Linux binary, the "Protocol" must be
"MouseSystems". When you are using the FreeBSD version of the
X server, the "Protocol" should be "SysMouse".)
- When you use the serial mouse, edit /etc/rc.conf as follows.
moused_enable="YES"
mouse_port="/dev/cuaa0"
mouse_type="auto"
mouse_flags=""
(I assume your mouse is connected to COM1. If you are using COM2,
mouse_port should be "/dev/cuaa1")
The "Pointer" section of /etc/XF86Config should be the same as above.
Kazu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001200210.SAA62503>