Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Feb 2004 08:52:54 +0800 (PHT)
From:      rfa@msumain.edu.ph
To:        freebsd-questions@freebsd.org
Cc:        demuel@msumain.edu.ph
Subject:   kernel compile error
Message-ID:  <3961.203.177.105.178.1078015974.squirrel@bayok.msumain.edu.ph>

next in thread | raw e-mail | index | archive | help
Im kinda new at this and

I was compiling my kernel on my Dell Inspiron600m running FreeBSD 5.2
RELEASE when I just remembered[after taking a nap] that I did

#make buildkernel KERNCONF=GENERIC

and I forgot to edit the /usr/src/sys/i386/conf/GENERIC file before
running the process.

anyway, the #make buildkernel completed and i wanted to change the GENERIC
file so i went aroung and commented out all the stuff that i didnt have on
my system and did a #make buildkernel KERNCONF=GENERIC again only to have
errors after about a minute into the process.

My Questions Are:
Is it wrong to do this process again after a successful #make buildkernel?
If so, what should I do to do it successfully? [should i rm -rf /usr/src
&& cvsup -g -L 2 /etc/standard-supfile && make world again?]

Or is it possible that my GENERIC file is wrong?

Here is the GENERIC file[The error output will follow]:

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           GENERIC

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

makeoptions     DEBUG=-g                # Build kernel with gdb(1) debug
symbols

options         SCHED_ULE               # ULE scheduler
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big
directories
options         MD_ROOT                 # MD is a potential root device
options         NFSCLIENT               # Network Filesystem Client
options         NFSSERVER               # Network Filesystem Server
options         NFS_ROOT                # NFS usable as /, requires NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires
PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP
THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         SCSI_DELAY=15000        # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         PFIL_HOOKS              # pfil(9) framework

# Debugging for use in -current
options         DDB                     # Enable the kernel debugger
options         INVARIANTS              # Enable calls of extra sanity
checking
options         INVARIANT_SUPPORT       # Extra sanity checks of internal
structures, required by INVARIANTS
options         WITNESS                 # Enable checks to detect
deadlocks and cycles
options         WITNESS_SKIPSPIN        # Don't run witness on spinlocks
for speed

# To make an SMP kernel, the next two are needed
#options        SMP             # Symmetric MultiProcessor Kernel
device          apic            # I/O APIC

device          isa
#device         eisa
device          pci

# Floppy drives
#device         fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
#device         ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
#device         atapifd         # ATAPI floppy drives
#device         atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
#device         ahc             # AHA2940 and onboard AIC7xxx devices
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         isp             # Qlogic family
device          mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets +
those of `ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aha             # Adaptec 154x SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters,
AIC-6[23]60.

#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# SCSI peripherals
#device         scbus           # SCSI bus (required for SCSI)
#device         ch              # SCSI media changers
#device         da              # Direct Access (disks)
#device         sa              # Sequential Access (tape etc)
#device         cd              # CD
#device         pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device         amr             # AMI MegaRAID
#device         asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for
options
#device         iir             # Intel Integrated RAID
#device         ips             # IBM (Adaptec) ServeRAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         ida             # Compaq Smart RAID
#device         mlx             # Mylex DAC960 family
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
#device         psm             # PS/2 mouse

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc
# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER         # support for X server on a vt console
#options        FAT_CURSOR      # start with block cursor

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pcic            # ExCA ISA and PCI bridges
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet
Card
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          bfe             # Broadcom BCM440x 10/100 ethernet
device          bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over
'lnc')
#device         re              # RealTek 8139C+/8169/8169S/8110S
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x and SK-982x gigabit
ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         lnc             # NE2100, NE32-VL Lance Ethernet cards
#device         sn              # SMC's 9000 series of ethernet chips
#device         xe              # Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device         le

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         awi             # BayStack 660 and others
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless
NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device          random          # Entropy device
device          loop            # Network loopback
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
#3device                uscanner        # Scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         axe             # ASIX Electronics USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)




AND HERE ARE THE ERRORS:

linking kernel.debug
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:60: undefined reference to
`cam_simq_alloc'
/usr/src/sys/dev/mpt/mpt_freebsd.c:68: undefined reference to `cam_sim_alloc'
/usr/src/sys/dev/mpt/mpt_freebsd.c:71: undefined reference to `cam_simq_free'
/usr/src/sys/dev/mpt/mpt_freebsd.c:79: undefined reference to
`xpt_bus_register'
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_create_path'
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:87: undefined reference to `cam_sim_free'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:97: undefined reference to `xpt_free_path'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:99: undefined reference to `cam_sim_free'
mpt_freebsd.o: In function `mpttimeout':
/usr/src/sys/dev/mpt/mpt_freebsd.c:163: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_execute_req':
/usr/src/sys/dev/mpt/mpt_freebsd.c:211: undefined reference to
`xpt_freeze_devq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:219: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:362: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_start':
/usr/src/sys/dev/mpt/mpt_freebsd.c:398: undefined reference to
`xpt_freeze_simq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:405: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:508: undefined reference to
`xpt_freeze_simq'
mpt_freebsd.o: In function `mpt_done':
/usr/src/sys/dev/mpt/mpt_freebsd.c:1004: undefined reference to
`xpt_freeze_devq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1018: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_action':
/usr/src/sys/dev/mpt/mpt_freebsd.c:1057: undefined reference to
`xpt_freeze_simq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1103: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1413: undefined reference to
`cam_calc_geometry'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1414: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1450: undefined reference to `xpt_done'
umass.o: In function `umass_cam_attach_sim':
/usr/src/sys/dev/usb/umass.c:2124: undefined reference to `cam_simq_alloc'
/usr/src/sys/dev/usb/umass.c:2128: undefined reference to `cam_sim_alloc'
/usr/src/sys/dev/usb/umass.c:2136: undefined reference to `cam_simq_free'
/usr/src/sys/dev/usb/umass.c:2140: undefined reference to `xpt_bus_register'
umass.o: In function `umass_cam_rescan_callback':
/usr/src/sys/dev/usb/umass.c:2161: undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_rescan':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_periph'
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_create_path'
umass.o: In function `umass_cam_rescan':
/usr/src/sys/dev/usb/umass.c:2184: undefined reference to `xpt_setup_ccb'
/usr/src/sys/dev/usb/umass.c:2188: undefined reference to `xpt_action'
umass.o: In function `umass_cam_detach_sim':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
umass.o: In function `umass_cam_detach_sim':
/usr/src/sys/dev/usb/umass.c:2232: undefined reference to `cam_sim_free'
umass.o: In function `umass_cam_action':
/usr/src/sys/dev/usb/umass.c:2412: undefined reference to `xpt_done'
/usr/src/sys/dev/usb/umass.c:2506: undefined reference to `cam_calc_geometry'
/usr/src/sys/dev/usb/umass.c:2507: undefined reference to `xpt_done'
/usr/src/sys/dev/usb/umass.c:2530: undefined reference to `xpt_done'
umass.o: In function `umass_cam_cb':
/usr/src/sys/dev/usb/umass.c:2622: undefined reference to `xpt_done'
umass.o: In function `umass_cam_sense_cb':
/usr/src/sys/dev/usb/umass.c:2717: undefined reference to `xpt_done'
umass.o: In function `umass_cam_quirk_cb':
/usr/src/sys/dev/usb/umass.c:2739: undefined reference to `xpt_done'
*** Error code 1

Stop in /usr/obj/usr/src/sys/GENERIC.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.









Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3961.203.177.105.178.1078015974.squirrel>