Date: Mon, 18 Feb 2008 15:02:24 +0300 From: "Krotov Konstantin V." <tawer@insysnet.ru> To: freebsd-usb@freebsd.org Subject: Copying to usb flash drive corrupts files Message-ID: <47B973D0.8040509@insysnet.ru>
next in thread | raw e-mail | index | archive | help
Hello, I have similar problems with usb
dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #0: Mon Feb 11 16:53:19 MSK 2008
somebody@somewhere:/usr/obj/usr/src/sys/office
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1614.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,A
real memory = 536854528 (511 MB)
avail memory = 515842048 (491 MB)
kbd1 at kbdmux0
acpi0: <ASUS P4S333> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xe7000000-0xe7ffffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on p
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 6 at
device 2.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at
device 2.3 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 2.5
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 10 at device 5.0 on pci0
pcm0: [ITHREAD]
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem
0xe5000000-0xe50000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c1:28:01:cb:a1
rl0: [ITHREAD]
skc0: <SysKonnect Gigabit Ethernet (V2.0)> port 0xa000-0xa0ff mem
0xe4800000-0xe4803fff irq 5 at device 10.
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:46:46:6e:01
miibus1: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
skc0: [ITHREAD]
skc0: <SysKonnect Gigabit Ethernet (V2.0)> port 0xa000-0xa0ff mem
0xe4800000-0xe4803fff irq 5 at device 10.
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:46:46:6e:01
miibus1: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
skc0: [ITHREAD]
sym0: <1010-33> port 0x9800-0x98ff mem
0xe4000000-0xe40003ff,0xe3800000-0xe3801fff irq 10 at device 13.0 on
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14
15.
sym0: SCAN FOR LUNS disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14
15.
sym0: [GIANT-LOCKED]
sym0: [ITHREAD]
sym1: <1010-33> port 0x9400-0x94ff mem
0xe3000000-0xe30003ff,0xe2800000-0xe2801fff irq 10 at device 13.1 on
sym1: Symbios NVRAM, ID 7, Fast-80, SE, NO parity
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCAN AT BOOT disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14
15.
sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13
14 15.
sym1: [GIANT-LOCKED]
sym1: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd8000-0xdbfff pnpid ORM0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fdc0: No FDOUT register!
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class
0/0, rev 1.10/3.00, addr 2> on uhub0
ums0: 3 buttons and Z dir.
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on
uhub1
Timecounter "TSC" frequency 1614387304 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding enabled,
default to deny, logging disabled
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LW 010A> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz DT, offset 62, 16bit)
da0: Command Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
ubdevs -v:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
SiS(0x0000), rev 1.00
port 1 powered
port 2 addr 2: low speed, power 100 mA, config 1, Microsoft 3-Button
Mouse with IntelliEye(TM)(0x0040), Microsoft(0x045e), rev 3.00
port 3 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
SiS(0x0000), rev 1.00
port 1 addr 2: full speed, power 100 mA, config 1, DataTraveler
2.0(0x1603), Kingston(0x0951), rev 2.00
port 2 powered
port 3 powered
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47B973D0.8040509>