Date: Mon, 17 Nov 2008 18:24:09 GMT From: Greg Becker <greg@codeconcepts.com> To: freebsd-gnats-submit@FreeBSD.org Subject: www/128943: dmesg output for ASUS M3A79-T running FreeBSD-7.1-PRERELEASE amd64 Message-ID: <200811171824.mAHIO94N085901@www.freebsd.org> Resent-Message-ID: <200811171830.mAHIU4Wb013640@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 128943 >Category: www >Synopsis: dmesg output for ASUS M3A79-T running FreeBSD-7.1-PRERELEASE amd64 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Nov 17 18:30:04 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Greg Becker >Release: 7.1-PRERELEASE >Organization: >Environment: FreeBSD quadro.gateway.2wire.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #2: Mon Nov 17 06:18:06 CST 2008 greg@quadro.gateway.2wire.net:/usr/obj/usr/src/sys/GENERIC amd64 >Description: Attached output from dmesg for ASUS M3A79-T running amd64 FreeBSD-7.1-PRERELEASE. Also boots with FreeBSD-7.0-RELEASE. >How-To-Repeat: >Fix: Patch attached with submission follows: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #2: Mon Nov 17 06:18:06 CST 2008 greg@quadro.gateway.2wire.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Phenom(tm) 9950 Quad-Core Processor (2608.81-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,<b23>> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>> Cores per package: 4 usable memory = 4280356864 (4082 MB) avail memory = 4118880256 (3928 MB) ACPI APIC Table: <111108 OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <111108 OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe8f0000-0xfe8fffff irq 18 at device 0.0 on pci1 pci1: <multimedia> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 18 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: Ethernet address: 00:23:54:1d:2a:bc miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell ATA controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xd800-0xd803,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 19 at device 0.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] atapci1: <ATI AHCI controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 17.0 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 6 ports detected ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 2> on atapci1 ata6: [ITHREAD] ata7: <ATA channel 3> on atapci1 ata7: [ITHREAD] ata8: <ATA channel 4> on atapci1 ata8: [ITHREAD] ata9: <ATA channel 5> on atapci1 ata9: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 17 at device 18.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered uhub3: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2> on uhub2 uhub3: single transaction translator uhub3: 2 ports with 0 removable, self powered uhub4: <vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 3> on uhub3 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered uhub5: <PI Engineering Kinesis Keyboard Hub, class 9/0, rev 1.10/3.10, addr 4> on uhub4 uhub5: 4 ports with 2 removable, bus powered ukbd0: <vendor 0x05f3 product 0x0007, class 0/0, rev 1.10/3.10, addr 5> on uhub5 kbd2 at ukbd0 uhid0: <vendor 0x05f3 product 0x0007, class 0/0, rev 1.10/3.10, addr 5> on uhub5 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/16.00, addr 6> on uhub4 ums0: 16 buttons and Z dir. umass0: <SMSC USB2223, class 0/0, rev 2.00/3.60, addr 7> on uhub3 ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci2 usb3: USB revision 1.0 uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub6: 3 ports with 3 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 18 at device 19.1 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci3 usb4: USB revision 1.0 uhub7: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub7: 3 ports with 3 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7fa800-0xfe7fa8ff irq 19 at device 19.2 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci1 usb5: USB revision 2.0 uhub8: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub8: 6 ports with 6 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci2: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci2 ata0: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 22 at device 8.0 on pci4 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:1e:8c:00:01:87:9d:f2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1130000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:1e:8c:87:9d:f2 fwe0: Ethernet address: 02:1e:8c:87:9d:f2 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:1e:8c:00:01:87:9d:f2 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ohci4: <OHCI (generic) USB controller> mem 0xfe7f9000-0xfe7f9fff irq 18 at device 20.5 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb6: OHCI version 1.0, legacy support usb6: SMM does not respond, resetting usb6: <OHCI (generic) USB controller> on ohci4 usb6: USB revision 1.0 uhub9: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub9: 2 ports with 2 removable, self powered acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <NEC DVD RW ND-3550A/1.07> at ata0-master UDMA33 ad8: 953869MB <Seagate ST31000340AS SD15> at ata4-master SATA300 SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! cd0 at ata0 bus 0 target 0 lun 0 cd0: <_NEC DVD_RW ND-3550A 1.07> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SMSC 223 U HS-CF 3.60> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <SMSC 223 U HS-MS 3.60> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <SMSC 223 U HS-SM 3.60> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <SMSC 223 U HS-SD/MMC 3.60> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad8s1a pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfe7f4000-0xfe7f7fff irq 16 at device 20.2 on pci0 pcm0: [ITHREAD] pcm0: <HDA Codec: Analog Devices (Unknown)> pcm0: <HDA Driver Revision: 20080420_0052> pcm1: <ATI (Unknown) High Definition Audio Controller> mem 0xfe8ec000-0xfe8effff irq 19 at device 0.1 on pci1 pcm1: [ITHREAD] pcm1: <HDA Codec: Unknown Codec> pcm1: <HDA Driver Revision: 20080420_0052> >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200811171824.mAHIO94N085901>