Date: Thu, 7 Sep 1995 18:35:32 -0700 (PDT) From: Archie Cobbs <archie@tribe.com> To: questions@freebsd.org Subject: Accessing CD-ROM causes hang Message-ID: <199509080135.SAA00250@bubba.tribe.com>
next in thread | raw e-mail | index | archive | help
Hello,
Sometimes when I access the CD-ROM drive to play an audio CD using
xcdplayer, the music starts but everything else stops, with a total
freeze-up only reset can cure.
Any ideas?
Thanks,
-Archie
Output of dmesg:
FreeBSD 2.0.5-RELEASE #0: Mon Jul 31 03:37:56 PDT 1995
root@phil.tribe.com:/usr/src/sys/compile/PHIIL_586
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 16384000 (4000 pages)
avail memory = 15089664 (3684 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed1 at 0x300-0x31f irq 5 on isa
ed1: address 00:00:e8:c9:44:3d, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
bt0: Bt946C/ 0-PCI/EISA/VLB(32bit) bus
bt0: reading board settings, busmastering, int=10
bt0: version 4.25J, async only, parity, 32 mbxs, 32 ccbs
bt0: targ 0 async
bt0: Enabling Round robin scheme
bt0 at 0x330 irq 10 on isa
bt0 waiting for scsi devices to settle
(bt0:0:0): "QUANTUM FIREBALL1080S 1Q04" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 1042MB (2134305 512 byte sectors)
(bt0:4:0): "CHINON CD-ROM CDS-535 Q20" type 5 removable SCSI 2
cd0(bt0:4:0): CD-ROM cd present.[327278 x 2048 byte records]
npx0 on motherboard
npx0: INT 16 interface
gus0 at 0x220 irq 11 drq 1 on isa
gus0: <Gravis UltraSound 3.7 (256k)>
Probing for devices on the pci0 bus:
configuration mode 1 allows 32 devices.
pci0:0: vendor=0x1039, device=0x406, class=bridge [not supported]
pci0:1: vendor=0x1039, device=0x8, class=bridge [not supported]
vga0 <VGA-compatible display device> rev 1 on pci0:10
pci0:12: vendor=0x104b, device=0x1040, class=storage [not supported]
map(10): io(e800)
pci0:13: vendor=0x1095, device=0x640, class=storage [not supported]
pci0: uses 8388608 bytes of memory from fb000000 upto fb7fffff.
changing root device to sd0a
WARNING: / was not properly dismounted.
_______________________________________________________________________________
Archie L. Cobbs, archie@tribe.com * Tribe Computer Works http://www.tribe.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199509080135.SAA00250>