Date: Sun, 20 Jan 2002 18:17:43 +0000 (GMT) From: Tim Joseph <tim.spam@spicy.org.uk> To: freebsd-stable@freebsd.org Subject: HDD not detected during install (fwd) Message-ID: <20020120181611.L13126-100000@athos.ticktock.foo.uk>
next in thread | raw e-mail | index | archive | help
(Previously posted to comp.unix.bsd.freebsd.misc and freebsd-questions
without much joy)
Hi,
I have (I hope) a simple problem.
I am trying to install FBSD 4.4 onto a TI Extensa 510 laptop. However,
when I reach the stage where I choose what I would like done to the
disk, the install program reports that it can't find the harddrive and I
have to give up. (I'm doing an FTP install over a PCMCIA network card.)
I have previously installed OpenBSD 2.9 straight onto this machine without
any fiddling around! For info, OBSD detected the HD controller as a wdc0.
OBSD dmesg attached.
What can I try? Do I need to roll my own release with a new kernel to
support the wdc controller? If so, how do I make my own release?
Thanks in advance for your help. Please cc me in to any replies, since I'm
off list!
From,
Tim
--
To email me, please remove the ".spam"
OpenBSD 2.9-stable (NEMO) #0: Sat Oct 13 01:54:01 BST 2001
root@nemo:/home/src/sys/arch/i386/compile/NEMO
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 100 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem = 16363520 (15980K)
avail mem = 13291520 (12980K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 01/01/94, BIOS32 rev. 0 @
0xf0210
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xf0200/0xa00
pcibios0: PCI BIOS has 5 Interrupt Routing table entries
pcibios: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0xb000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor 0x10b9 product 0x1511 rev 0x04
pcib0 at pci0 dev 2 function 0 vendor 0x10b9 product 0x1513 rev 0xa4
vga1 at pci0 dev 6 function 0 vendor 0x102c product 0x00d8 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pciide0 at pci0 dev 8 function 0 vendor 0x10b9 product 0x5215 rev 0x01: no
DMA,channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (other hardware responding at addresses)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1926FCV>
wd0: 16-sector PIO, LBA, 777MB, 1579 cyl, 16 head, 63 sec, 1592568 sectors
wd0(wdc0:0:0): using PIO mode 4
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Cirrus PD672X> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne3 at pcmcia0 function 0 "Kingston, KNE-PC2, " port 0x200/32 irq 3
ne3: address 00:c0:f0:1c:12:34
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask 4040 netmask 4048 ttymask 52ca
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020120181611.L13126-100000>