Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 31 Mar 2003 02:40:29 +0200 (=?ISO-8859-1?Q?Westeurop=E4ische_Sommerzeit?=)
From:      Friedemann Becker <Friedemann.Becker@student.uni-tuebingen.de>
To:        freebsd-current@freebsd.org
Subject:   Re: Problems with clock (fwd)
Message-ID:  <Pine.WNT.4.51.0303310240060.1800@chasey>

next in thread | raw e-mail | index | archive | help


---------- Forwarded message ----------
Date: Fri, 28 Mar 2003 23:18:35 +0100 (CET)
From: Friedemann Becker <lucius@student.uni-tuebingen.de>
To: Andris <andris@multicom.lv>
Subject: Re: Problems with clock

Try this one. I had the same problem, and de fix described put the clock
back to normal operation.

http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/32226

On Fri, 28 Mar 2003, Andris wrote:

> Hi everyone!
>
> I have strange problems with my PC clock. Clock seems to be ~2 times faster.
>
> What's up?
>
> Andris
>
> Here is dmesg output:
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-RELEASE-p6 #0: Fri Mar 28 11:45:46 EET 2003
>     root@mezhs.buts.lv:/usr/obj/usr/src/sys/MEZHS
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0407000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04070a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 333516074 Hz
> CPU: AMD-K6(tm) 3D processor (333.52-MHz 586-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
>   Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
>   AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
> real memory  = 134152192 (127 MB)
> avail memory = 125931520 (120 MB)
> Initializing GEOMetry subsystem
> K6-family MTRR support enabled (2 registers)
> VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c4eeb (c0004eeb)
> VESA: S3 Incorporated. 86C775/86C785
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <ALi_ > on motherboard
>     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
>     ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
> Using $PIR table, 6 entries at 0xc00f7c40
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-safe"  frequency 3579545 Hz
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_cpu0: <CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Ali M1541 host to AGP bridge> mem 0xd0000000-0xd1ffffff at device 0.0
> on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <display, VGA> at device 8.0 (no driver attached)
> rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
> 0xebfeff00-0xebfeffff irq 10 at device 9.0 on pci0
> rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
> mode
> rl0: Ethernet address: 00:30:4f:16:8f:79
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 9 at device
> 10.0 on pci0
> ed0: address 00:48:45:00:07:9e, type NE2000 (16 bit)
> atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf at device
> 15.0 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> acpi_button0: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> fdc0: cmd 3 failed at out byte 1 of 3
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: cmd 3 failed at out byte 1 of 3
> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> fdc0: cannot reserve I/O port range (6 ports)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
> accept, logging unlimited
> DUMMYNET initialized (011031)
> IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> ad0: 3098MB <ST33210A> [6296/16/63] at ata0-master UDMA33
> Mounting root from ufs:/dev/ad0s1a
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.WNT.4.51.0303310240060.1800>