Date: Wed, 31 Mar 2021 12:41:01 +0200 From: Oskar Holmlund <info@ohdata.se> To: Stefan Parvu <sparvu@kronometrix.org> Cc: freebsd-arm@freebsd.org, owner-freebsd-arm@freebsd.org Subject: Re: iMX8 SBC boards Message-ID: <8510ae297d299608ac87f1241a6ec67f@ohdata.se> In-Reply-To: <9a27e50df349d8bb189d241c4a11b025@ohdata.se> References: <AF0AE57F-4EC9-4AF5-AA2B-211C0E2FF0E0@kronometrix.org> <68c7a8f5a772c9d2e2874c9d0d84689b@ohdata.se> <8A42376D-EB48-49A5-AEC5-E7B2FCA8074E@kronometrix.org> <9a27e50df349d8bb189d241c4a11b025@ohdata.se>
next in thread | previous in thread | raw e-mail | index | archive | help
2021-03-31 11:47 skrev Oskar Holmlund: > 2021-03-31 10:49 skrev Stefan Parvu: >>> Maybe hummingboard can be an option to consider: >>> https://www.solid-run.com/embedded-industrial-iot/nxp-i-mx8-family/hummingboard-m/ >> >> Thank you. These are also looking very good. These are 64-bit Armv8 >> based boards. The RAM is not ECC, right ? >> >> Stefan > > You have to ask solid-run about ECC. > > https://www.nxp.com/docs/en/supporting-information/IMX8LAYERCMPR.pdf > > The NXP i.MX 8M Plus support ECC memory so you have to combine the > hummingboard ("the baseboard") with the "plus model" SoM. (still need > to ask solid-run what type of memory they have put into their SoM or > if its special order for ECC) > https://www.solid-run.com/embedded-industrial-iot/nxp-i-mx8-family/imx8m-plus-som/#specifications > https://developer.solid-run.com/knowledge-base/i-mx8m-plus-som/?_ga=2.2782448.1993230988.1617174496-1730643533.1617174496 https://cgit.freebsd.org/src/commit/sys/arm64/freescale?id=94bc2117b4adaf7101cc412f4277e5812ad61ae2 nitrogen 8m seems to be a more tested board. -- Bästa Hälsningar Oskar Holmlund Tel 070-3220292
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8510ae297d299608ac87f1241a6ec67f>