Date: Mon, 7 Mar 2016 12:54:48 +0200 From: Jukka Ukkonen <jau789@gmail.com> To: freebsd-arm <freebsd-arm@FreeBSD.org> Subject: Re: Odd hang during boot on RPI2 for 2 days now Message-ID: <56DD5DF8.9090700@gmail.com> In-Reply-To: <56D99C2E.4020301@gmail.com> References: <56D99C2E.4020301@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Continuing where I previously left with this problem... When I set boot_verbose=1 in loader.conf I got a little more information before the poor RPI2 simply froze. Now the last shown line was... random: harvesting attach, 8 bytes (4 bits) from ukbd0 If I disconnect the USB keyboard and then reconnect it, the kernel prints the normal detach and attach messages, once again returns back to printing the "random: ..." line shown above, and freezes again. --jau On 03/04/16 16:31, Jukka Ukkonen wrote: > > Hello all, > > A couple of days ago I rebuilt 11-current for my RPI2. > For some odd and still unexplained reason it started > hanging after it had found the USB keyboard during the > auto-configure. I have tried "svn update" a few times > since the problem started, but apparently there has > been no patch to this. The latest svn version which I > have tried is 296383. > I attach the dmesg.boot from the last known good boot. > It shows the last known properly booting system was > 11.0-CURRENT r296310. > I have also marked the place where the boot now hangs > as follows ... > > ... > kbd1 at ukbd0 > *** > smsc0: chip 0xec00, rev. 0002 > ... > > Everything before the "***" mark seems to work just fine. > At the mark all progress stops and none of the messages > normally seen after this point are shown. > > Has something changed perhaps in a manner which could > cause this hang? > > --jau >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56DD5DF8.9090700>