Date: Mon, 13 Mar 2006 23:42:04 GMT From: Arno Klaassen <arno@heho.snv.jussieu.fr> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/94426: Cannot blank CDs with Samsung TS-L532A Message-ID: <200603132342.k2DNg4MS044496@www.freebsd.org> Resent-Message-ID: <200603132350.k2DNoGZf011060@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 94426 >Category: kern >Synopsis: Cannot blank CDs with Samsung TS-L532A >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Mar 13 23:50:15 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Arno Klaassen >Release: 6.1-PRERELEASE >Organization: INSERM U572 >Environment: FreeBSD demo 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Mon Mar 13 21:11:02 CET 2006 toor@demo:/files/amd64/obj/files/bsd/src6/sys/D470K amd64 >Description: When blanking a CDRW, progress gets to about 2%, than nothing happens but the IDE-LED remains 100% on, and eventually the systems panics (on a detach-atipi-cd) Relevant part of dmesg : ###### atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c60-0x1c6f at device 17.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c60 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on 8235 chip ad0: setting UDMA100 on 8235 chip ad0: 76351MB <SAMSUNG MP0804H YS200-04> at ata0-master UDMA100 ad0: 156368016 sectors [155127C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: VIA check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: setting PIO4 on 8235 chip acd0: setting UDMA33 on 8235 chip acd0: <TSSTcorpCD/DVDW TS-L532A/TI50> DVDR drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ##### standard kernel-config with following additions : device cpufreq device tap #device atapicam device sound device smbus device iicbus device iicsmb options NTFS options TCP_DROP_SYNFIN Adding or leaving out atipicam has no influence, nor does forcing PIO behaviour by hw.ata.atapi_dma=0 >How-To-Repeat: burncd -f /dev/acd0 blank >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200603132342.k2DNg4MS044496>