Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 14 Dec 2016 12:27:11 +0200
From:      Konstantin Belousov <kostikbel@gmail.com>
To:        Slawa Olhovchenkov <slw@zxy.spb.ru>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Enabling NUMA in BIOS stop booting FreeBSD
Message-ID:  <20161214102711.GF94325@kib.kiev.ua>
In-Reply-To: <20161214095350.GE94325@kib.kiev.ua>
References:  <20161213112340.GT54029@kib.kiev.ua> <20161213124931.GI90287@zxy.spb.ru> <20161213135759.GY54029@kib.kiev.ua> <20161213141114.GJ90287@zxy.spb.ru> <20161213143401.GK90287@zxy.spb.ru> <20161213150139.GZ54029@kib.kiev.ua> <20161213152838.GL90287@zxy.spb.ru> <20161213172529.GC54029@kib.kiev.ua> <20161213174345.GB98176@zxy.spb.ru> <20161214095350.GE94325@kib.kiev.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 14, 2016 at 11:53:50AM +0200, Konstantin Belousov wrote:
> On Tue, Dec 13, 2016 at 08:43:45PM +0300, Slawa Olhovchenkov wrote:
> > On Tue, Dec 13, 2016 at 07:25:29PM +0200, Konstantin Belousov wrote:
> > 
> > > This is not what I expected.
> > > Also, I realized that I mis-read the memory test code.  It does not
> > > obliterate memory, old content is preserved.
> > > 
> > > Please do exactly the same testing with another patch, at the end of the
> > > message.  There could be more output, up to 256 lines.
> > 
> > No problem.
> > 
> > Booting...
> > KDB: debugger backends: ddb
> > KDB: current backend: ddb
> > SMAP type=01 base=0000000000000000 len=0000000000099c00
> > SMAP type=02 base=0000000000099c00 len=0000000000006400
> > SMAP type=02 base=00000000000e0000 len=0000000000020000
> > SMAP type=01 base=0000000000100000 len=000000007906b000
> > SMAP type=02 base=000000007916b000 len=0000000000936000
> > SMAP type=04 base=0000000079aa1000 len=0000000000509000
> > SMAP type=02 base=0000000079faa000 len=0000000002056000
> > SMAP type=01 base=0000000100000000 len=0000001f80000000
> > SMAP type=02 base=000000007c000000 len=0000000014000000
> > SMAP type=02 base=00000000fed1c000 len=0000000000029000
> > SMAP type=02 base=00000000ff000000 len=0000000001000000
> > TTT1 0xfffff8207ff00000 0xfffff8207fffffb8 100000
> > . 0
> > . 1000
> > . 2000
> > . 3000
> > . 4000
> > . 5000
> > . 6000
> > . 7000
> > . 8000
> > . 9000
> > . a000
> > . b000
> > . c000
> > . d000
> > . e000
> > . f000
> > . 10000
> > . 11000
> > . 12000
> > . 13000
> > . 14000
> > . 15000
> > . 16000
> > . 17000
> > . 18000
> > . 19000
> > . 1a000
> > . 1b000
> > . 1c000
> > . 1d000
> > . 1e000
> > . 1f000
> > . 20000
> > . 21000
> > . 22000
> > . 23000
> > . 24000
> > . 25000
> > . 26000
> > . 27000
> > . 28000
> > . 29000
> > . 2a000
> > . 2b000
> > 
> 
> Do you still have access to the machine ?
> If yes, please try this patch (against clean tree, as always) with the
> same instructions as before.
> 

Updated patch, it should provide the expected information in case of
page fault.

diff --git a/sys/amd64/amd64/machdep.c b/sys/amd64/amd64/machdep.c
index b2283339405..682307f5fe4 100644
--- a/sys/amd64/amd64/machdep.c
+++ b/sys/amd64/amd64/machdep.c
@@ -1673,6 +1673,16 @@ hammer_time(u_int64_t modulep, u_int64_t physfree)
 	wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D);
 
 	/*
+	 * Temporary forge some valid pointer to PCB, for exception
+	 * handlers.  It is reinitialized properly below after FPU is
+	 * set up.  Also set up td_critnest to short-cut the page
+	 * fault handler.
+	 */
+	cpu_max_ext_state_size = sizeof(struct savefpu);
+	thread0.td_pcb = get_pcb_td(&thread0);
+	thread0.td_critnest = 1;
+
+	/*
 	 * The console and kdb should be initialized even earlier than here,
 	 * but some console drivers don't work until after getmemsize().
 	 * Default to late console initialization to support these drivers.
@@ -1762,6 +1772,7 @@ hammer_time(u_int64_t modulep, u_int64_t physfree)
 #ifdef FDT
 	x86_init_fdt();
 #endif
+	thread0.td_critnest = 0;
 
 	/* Location of kernel stack for locore */
 	return ((u_int64_t)thread0.td_pcb);
diff --git a/sys/kern/subr_msgbuf.c b/sys/kern/subr_msgbuf.c
index f275aef3b4f..1be7a629f65 100644
--- a/sys/kern/subr_msgbuf.c
+++ b/sys/kern/subr_msgbuf.c
@@ -67,14 +67,19 @@ msgbuf_init(struct msgbuf *mbp, void *ptr, int size)
 	mbp->msg_ptr = ptr;
 	mbp->msg_size = size;
 	mbp->msg_seqmod = SEQMOD(size);
+printf("YYY1\n");
 	msgbuf_clear(mbp);
+printf("YYY2\n");
 	mbp->msg_magic = MSG_MAGIC;
 	mbp->msg_lastpri = -1;
 	mbp->msg_flags = 0;
+printf("YYY3\n");
 	bzero(&mbp->msg_lock, sizeof(mbp->msg_lock));
 	mtx_init(&mbp->msg_lock, "msgbuf", NULL, MTX_SPIN);
+printf("YYY4\n");
 }
 
+
 /*
  * Reinitialize a message buffer, retaining its previous contents if
  * the size and checksum are correct. If the old contents cannot be
@@ -85,8 +90,10 @@ msgbuf_reinit(struct msgbuf *mbp, void *ptr, int size)
 {
 	u_int cksum;
 
-	if (mbp->msg_magic != MSG_MAGIC || mbp->msg_size != size) {
+	if (1 || mbp->msg_magic != MSG_MAGIC || mbp->msg_size != size) {
+printf("XXX1\n");
 		msgbuf_init(mbp, ptr, size);
+printf("XXX2\n");
 		return;
 	}
 	mbp->msg_seqmod = SEQMOD(size);
@@ -117,10 +124,12 @@ void
 msgbuf_clear(struct msgbuf *mbp)
 {
 
+printf("ZZZ1\n");
 	bzero(mbp->msg_ptr, mbp->msg_size);
 	mbp->msg_wseq = 0;
 	mbp->msg_rseq = 0;
 	mbp->msg_cksum = 0;
+printf("ZZZ2\n");
 }
 
 /*
diff --git a/sys/kern/subr_prf.c b/sys/kern/subr_prf.c
index e78863830c7..a72984dbc19 100644
--- a/sys/kern/subr_prf.c
+++ b/sys/kern/subr_prf.c
@@ -998,6 +998,14 @@ msgbufinit(void *ptr, int size)
 	char *cp;
 	static struct msgbuf *oldp = NULL;
 
+printf("TTT1 %p %p %x\n", ptr, (char *)ptr + size - sizeof(*msgbufp), size);
+for (int i = 0; i < size; i++) {
+if (i % PAGE_SIZE == 0) printf(". %x\n", i);
+	volatile char *c = (char *)ptr + i;
+	char tmp;
+	tmp = *c;
+	*c = tmp;
+}
 	size -= sizeof(*msgbufp);
 	cp = (char *)ptr;
 	msgbufp = (struct msgbuf *)(cp + size);



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20161214102711.GF94325>