Date: Sat, 10 Aug 2002 07:56:58 -0700 From: "PetBuilder" <petbuilder@attbi.com> To: <freebsd-questions@FreeBSD.ORG> Subject: Multiple network settings Message-ID: <001001c2407e$2d6bc650$0100a8c0@HOME> References: <003001c15f0a$39466170$77a44a42@home><20011027121055.B22280@dan.emsphone.com><003601c15f0b$e824f660$77a44a42@home><0110271112442F.96094@chip.wiegand.org> <1fwv1ffckv.v1f@localhost.localdomain>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Everyone, I'm hoping someone can help me get this figured out. I'm bringing in a second line to provide redundancy for my server and I need to configure a second network card to accept a completely different set of routing instructions With our initial network card we have the following on the /etc/rc.conf file: defaultrouter="192.168.0.1" ifconfig_de0="inet 192.168.0.10 netmask 255.255.255.0" And our /etc/resolv.conf file is: nameserver 127.0.0.1 nameserver 10.10.10.1 nameserver 10.10.10.2 We installed a second card and want to configure the following as a usable route. We are hoping to be able to connect to this machine from 2 different providers. defaultrouter="192.168.1.1" ifconfig rl0 inet 192.168.1.10 netmask 255.255.255.0 nameserver 10.10.11.1 nameserver 10.10.11.2 Can someone tell me if this is possible and if so, how it should be configured? Thank you in advance, Craig Rose To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c2407e$2d6bc650$0100a8c0>