Date: Sun, 17 May 2020 12:45:19 -0700 From: Mark Millard <marklmi@yahoo.com> To: Philipp Klaus Krause <pkk@spth.de> Cc: freebsd-arm@freebsd.org Subject: Re: Recommended arm hardware (mostly for compilation)? Message-ID: <76FBBA99-884F-46C2-827C-FA9333B1EFD4@yahoo.com> In-Reply-To: <6041695d-29c7-3020-d26f-690108cd8bb6@spth.de> References: <1b109252-3232-05c4-e1e0-2fea4739583d@spth.de> <47A5AF8A-1EB9-4721-94D5-B0A0A6FFF69B@unrelenting.technology> <9E10C464-474F-489A-A667-B263A64E78F2@googlemail.com> <EXbrttrQC0_YXokurrTuHT6YcY3XC0JhXIkklq6vP6OmhlDw2DSXWz8B3_e_9kDFZowErA8gjjvQrAe4w5t4M8J1Fmfb-ev4uIgI9r7wW4w=@a9development.com> <6041695d-29c7-3020-d26f-690108cd8bb6@spth.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-May-14, at 09:44, Philipp Klaus Krause <pkk at spth.de> wrote: > Am 14.05.20 um 17:30 schrieb Dan Kotowski: >> I have a SolidRun HoneyComb workstation board based on the LX2K and = can confirm it's quite powerful, [=E2=80=A6] >=20 > Looking at the specifications, I haven't yet found anything on how = much > energy those LX2K or MACCHIATObin boards need and what kind of power > supply would be necessary for a minimal system. HoneyComb-LX2K-datasheet.pdf reports: Safety Notice =E2=80=A2 This device is to be used with Certified Power adaptor = with output rated 12VDC, 1.5A. Power adapter must meet Limited power = source (LPS) requirements. =E2=80=A2 Power adapter must meet local safety standards and = requirements based on product intended use. =E2=80=A2 Power adapter must meet Operating environment = conditions as specified above. LPS could be looked up for more information. (A "minimal system" would not have anything in the PCIe slot, for example.) =3D=3D=3D Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?76FBBA99-884F-46C2-827C-FA9333B1EFD4>