Date: Sun, 17 Dec 2006 12:30:22 GMT From: fred <fredantispam@free.fr> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/106832: USB HP printer is not detected by kernel when ACPI enabled. Message-ID: <200612171230.kBHCUMYC046954@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/106832; it has been noted by GNATS. From: fred <fredantispam@free.fr> To: bug-followup@FreeBSD.org Cc: Subject: Re: kern/106832: USB HP printer is not detected by kernel when ACPI enabled. Date: Sun, 17 Dec 2006 13:27:16 +0100 Hi, Please consider the following output of dmesg, with USB_DEBUG enbled. Thx. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun Dec 17 12:50:00 CET 2006 root@marsu:/usr/src/sys/i386/compile/FREEBSD_61 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf64 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2952724480 (2815 MB) avail memory = 2883387392 (2749 MB) ACPI APIC Table: <Nvidia AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvidia0: <GeForce 6800 Series GPU> mem 0xd3000000-0xd3ffffff,0xb0000000-0xbfffffff,0xd4000000-0xd4ff ffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 nvidia1: <GeForce 6800 Series GPU> mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff,0xd1000000-0xd1ff ffff irq 16 at device 0.0 on pci2 nvidia1: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <mass storage> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 ichsmb0: <SMBus controller> port 0xe400-0xe41f,0x5000-0x503f,0x5100-0x513f irq 20 at device 10.1 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 ohci0: <OHCI (generic) USB controller> mem 0xd9005000-0xd9005fff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 5 ports with 5 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xd9000000-0xd9000fff irq 22 at device 11.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 5 ports with 5 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd9001000-0xd90010ff irq 23 at device 11.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 10 ports with 10 removable, self powered nve0: <NVIDIA nForce MCP11 Networking Adapter> port 0xb800-0xb807 mem 0xd9002000-0xd9002fff irq 21 a t device 14.0 on pci0 nve0: Ethernet address 00:13:d4:e0:0b:ba miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:13:d4:e0:0b:ba atapci0: <nVidia nForce MCP UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf0 0f at device 15.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73 ,0xcc00-0xcc0f mem 0xd9003000-0xd9003fff irq 22 at device 16.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce MCP SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63 ,0xe000-0xe00f mem 0xd9004000-0xd9004fff irq 23 at device 17.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <serial bus, FireWire> at device 11.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xa000-0xa03f mem 0xd8000000-0xd80 1ffff irq 19 at device 12.0 on pci4 em0: Ethernet address: 00:13:d4:e0:01:23 pcm0: <nVidia nForce 4 MCP> port 0xe800-0xe8ff,0xec00-0xecff mem 0xd9006000-0xd9006fff irq 20 at dev ice 19.0 on pci0 pcm0: <Avance Logic ALC850 AC97 Codec> acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED uhub0: device problem (SET_ADDR_FAILED), disabling port 1 usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed - trying a port reset usb_new_device: set address 2 failed uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED uhub0: device problem (SET_ADDR_FAILED), disabling port 2 Timecounters tick every 1.000 msec acd0: CDRW <ASUS CRW-5232A4/1.00> at ata1-master UDMA33 acd1: DVDR <ASUS DRW-1608P3S/1.19> at ata1-slave UDMA66 ad4: 238475MB <Maxtor 6L250S0 BACE1G10> at ata2-master SATA150 ad6: 239372MB <Maxtor 6V250F0 VA111900> at ata3-master SATA300 ad8: 239372MB <Maxtor 6L250S0 BACE1G20> at ata4-master SATA150 ad10: 239372MB <Maxtor 6L250S0 BANC1G10> at ata5-master SATA150 SMP: AP CPU #1 Launched! -- Fred.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612171230.kBHCUMYC046954>