Date: Sun, 24 Oct 1999 17:39:59 +0100 From: "Clare & Peter Stubbs" <clarenpete@sol.co.uk> To: freebsd-questions@FreeBSD.org Subject: problem with a EXABYTE EXB-8200 253G Message-ID: <199910241640.RAA04464@gnasher.sol.co.uk>
next in thread | raw e-mail | index | archive | help
Hi All,
I have an Exabyte 8200 8mm tape on my 3.3 system. When I try
to use it I keep getting errors.
mt -f /dev/rsa1 status
(sa1:ahc0:0:4:0): MODE SENSE(06). CDB: 1a 0 0 0
c 0
(sa1:ahc0:0:4:0): ILLEGAL REQUEST
mt: /dev/rsa1: Invalid argument
Oct 24 17:09:42 moth /kernel: (sa1:ahc0:0:4:0):
MODE SENSE(06). CDB: 1a 0 0 0 c 0
Oct 24 17:09:42 moth /kernel: (sa1:ahc0:0:4:0):
MODE SENSE(06). CDB: 1a 0 0 0 c 0
Oct 24 17:09:42 moth /kernel: (sa1:ahc0:0:4:0):
ILLEGAL REQUEST
Oct 24 17:09:42 moth /kernel: (sa1:ahc0:0:4:0):
ILLEGAL REQUEST
using /dev/rst1 gives the same errors. It works fine under NT on the
same box, and works fine when attached to my Sparc.
Here's a dmesg if it helps
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.
All rights reserved.
FreeBSD 3.3-RELEASE #9: Sat Oct 16 21:56:22 BST
1999
root@moth.stubbs.org.uk:/usr/src/sys/compile/Moth
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping
= 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE
,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R>
real memory = 134217728 (131072K bytes)
avail memory = 127508480 (124520K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011,
at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011,
at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011,
at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02e8000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev
0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev
0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev
0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE
controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management
controller> rev 0x02 on pci0.7.3
vga0: <VGA-compatible display device> rev 0x04
int a irq 19 on pci0.9.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet>
rev 0x05 int a irq 17 on pci0.13.0
fxp0: Ethernet address 00:a0:c9:ea:30:dc
ahc0: <Adaptec 2910/15/20/30C SCSI adapter> rev
0x03 int a irq 16 on pci0.15.0
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255
SCBs
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial
0x17d7fc69 Comp ID: PNPb02f [0x2fb0d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SV0844A>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16
heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 71336 A>
wd1: 1277MB (2615760 sectors), 2595 cyls, 16
heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CRD-8160B/1.13>,
removable, accel, dma, iordis
acd0: drive speed 171 - 2734KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked,
lock protected
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in
COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072
on isa
npx0 on motherboard
npx0: INT 16 interface
pas0 not found at 0x388
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.16>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.16>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
awe0 at 0x620 on isa
AWE32: not detected
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa1 at ahc0 bus 0 target 4 lun 0
sa1: <EXABYTE EXB-8200 253G> Removable
Sequential Access SCSI-CCS device
sa1: 3.300MB/s transfers
changing root device to wd0s2a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <YAMAHA CRW4416S 1.0f> Removable CD-ROM
SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT
READY, Medium not present - tray closed
Anyone got any ideas?
Peter
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910241640.RAA04464>