Date: Mon, 10 May 1999 01:03:41 -0500 From: Michael Maxwell <drwho@xnet.com> To: freebsd-questions@FreeBSD.ORG Subject: Re: NIC causes printing problem? Message-ID: <19990510010341.C416@drwho.xnet.com> In-Reply-To: <19990510152905.D22791@freebie.lemis.com>; from Greg Lehey on Mon, May 10, 1999 at 03:29:05PM %2B0930 References: <19990509222332.A393@drwho.xnet.com> <Pine.BSF.3.91.990509205306.9185O-100000@dsinw.com> <19990510001519.A416@drwho.xnet.com> <19990510144805.C22791@freebie.lemis.com> <19990510002912.B416@drwho.xnet.com> <19990510152905.D22791@freebie.lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 10, 1999 at 03:29:05PM +0930, Greg Lehey wrote:
> Hmm. Not the answer I expected. What does dmesg show? You could try
> a verbose boot and maybe get more information.
Not the answer I expected either.. I don't get that one at all. But anyhow,
here's the info (everything) from dmesg. I *currently* am booted into the
kernel with network support enabled... here goes:
% dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #7: Sun May 9 19:32:02 CDT 1999
root@drwho.xnet.com:/usr/src/sys/compile/DRWHO
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400910972 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 134217728 (131072K bytes)
avail memory = 127508480 (124520K bytes)
Preloaded elf kernel "kernel" at 0xc02ed000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 10 on pci0.10.0
xl0: Ethernet address: 00:50:04:1a:20:8c
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 11 on pci0.12.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <Matrox model 0521 graphics accelerator> rev 0x01 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <EXABYTE EXB-8500SMBANXH1 06X0> Removable Sequential Access SCSI-2 device
sa0: 4.032MB/s transfers (4.032MHz, offset 11)
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING II 9.1WLS 5520> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1037> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 5 lun 0
da1: <IOMEGA ZIP 100 E.03> Removable Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
--
Michael Maxwell <drwho @ xnet.com> | http://www.xnet.com/~drwho/
-- Stop the illegal attacks on Serbia NOW! --
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990510010341.C416>