Date: Sat, 23 Feb 2013 09:39:43 +0000 From: Chris Rees <utisoft@gmail.com> To: mav@freebsd.org Cc: Jeremy Chadwick <jdc@koitsu.org>, freebsd-fs@freebsd.org, Andriy Gapon <avg@freebsd.org> Subject: Re: disk "flipped" - a known problem? Message-ID: <CADLo839OaZ-HfXW9HjKd0pTR66Sd4zzf8Y7ervZrb0-Oem4%2BcQ@mail.gmail.com> In-Reply-To: <51267055.3040500@FreeBSD.org> References: <20130121221617.GA23909@icarus.home.lan> <50FED818.7070704@FreeBSD.org> <20130125083619.GA51096@icarus.home.lan> <20130125211232.GA3037@icarus.home.lan> <20130125212559.GA1772@icarus.home.lan> <20130125213209.GA1858@icarus.home.lan> <20130126011754.GA1806@icarus.home.lan> <51267055.3040500@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 21 Feb 2013 19:07, "Alexander Motin" <mav@freebsd.org> wrote: > > On 26.01.2013 03:17, Jeremy Chadwick wrote: > > Okay, I've figured out the exact, 100% reproducible condition that > > causes the situation. It took me a lot of tries and a digital pocket > > recorder to take verbal notes (there are just too many things to look at > > simultaneously), but I've figured it out. > > > > I'm sorry for the verbosity, but it's necessary. > > > > Assume the disk we're talking about is /dev/ada5. > > > > 1. Prior to any issues, we have this: > > > > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5* > > crw-r----- 1 root operator 0x8c Jan 25 16:41 /dev/ada5 > > crw------- 1 root operator 0x75 Jan 25 16:35 /dev/pass5 > > crw------- 1 root operator 0x51 Jan 25 16:35 /dev/xpt0 > > > > 2. ada5 begins experiencing issues -- ATA commands (CDBs) submit do not > > get a response (not going to discuss how/why that can happen). > > > > 3. These types of messages are seen on console (naturally the CDB and > > request type will vary -- in this case it was because I was doing the dd > > zero'ing, thus tickling the bad sector/naughty firmware on the drive): > > > > Jan 25 16:29:28 icarus kernel: ahcich5: Timeout on slot 0 port 0 > > Jan 25 16:29:28 icarus kernel: ahcich5: is 00000000 cs 00000000 ss 00000001 rs 00000001 tfd 40 serr 00000000 cmd 0004c017 > > Jan 25 16:29:28 icarus kernel: ahcich5: AHCI reset... > > Jan 25 16:29:28 icarus kernel: ahcich5: SATA connect time=1000us status=00000113 > > Jan 25 16:29:28 icarus kernel: ahcich5: AHCI reset: device found > > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 80 80 77 01 40 00 00 00 00 00 00 > > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): CAM status: Command timeout > > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): Retrying command > > > > 4. Any I/O submit to ada5 during this time blocks (this is normal). > > > > 5. **While this situation is happening**, something using xpt(4) > > attempts to submit a CDB to the disk (ex. smartctl -a /dev/ada5). > > This request also blocks (again, normal). > > > > 6. Physical device falls off bus, or CAM kicks the disk off the bus. > > Doesn't matter which. We see messages resembling this (boy am I tired > > of this interspersed output problem): > > > > Jan 25 16:29:32 icarus kernel: (ada5:ahcich5:0:0:0): lost device > > Jan 25 16:29:32 icarus kernel: (pass5:ahcich5:0:0:0): lost device > > Jan 25 16:29:32 icarus kernel: (ada5:ahcich5:0:0:0): removing device entry > > Jan 25 16:29:32 icarus kernel: (pass5:ahcich5:0:0:0): passdevgonecb: devfs entry is gone > > > > 7. Standard I/O requests fail with errno=6 "Device not configured". > > xpt(4) requests also fail with the same errno. > > > > 8. Device-wise, at this stage all we have is: > > > > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5* > > crw------- 1 root operator 0x51 Jan 25 16:35 /dev/xpt0 > > > > 9. Device comes back online for whatever reason. FreeBSD sees the disk, > > blah blah blah: > > > > Jan 25 16:30:16 icarus kernel: GEOM: new disk ada5 > > Jan 25 16:30:16 icarus kernel: ada5: <WDC WD1500ADFD-00NLR4 21.07QR4> ATA-7 SATA 1.x device > > Jan 25 16:30:16 icarus kernel: ada5: Serial Number WD-WMAP41573589 > > Jan 25 16:30:16 icarus kernel: ada5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) > > Jan 25 16:30:16 icarus kernel: ada5: Command Queueing enabled > > Jan 25 16:30:16 icarus kernel: ada5: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C) > > Jan 25 16:30:16 icarus kernel: ada5: Previously was known as ad14 > > > > ...um, where's pass5? > > > > 10. /dev/pass5 is now completely (permanently) missing: > > > > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5* > > crw-r----- 1 root operator 0x99 Jan 25 16:42 /dev/ada5 > > crw------- 1 root operator 0x51 Jan 25 16:35 /dev/xpt0 > > > > 11. Any further attempts to communicate via xpt(4) with ada5 fail. > > Detaching and reattaching the disk does not fix the issue; the only fix > > is to reboot the system. > > > > 12. "camcontrol debug -IPXp scbus5" results in tons and tons of output > > all pertaining to xpt(4). It looks like xpt(4) is in some kind of > > loop. > > > > Below is my verbose boot (with non-kernel things removed), which > > also includes "camcontrol debug" output once things are in a bad state: > > > > http://jdc.koitsu.org/freebsd/xpt_oddity.log > > > > In this log you'll see that after 1 CAM timeout I yanked the drive, then > > roughly 30 seconds later reinserted it. > > > > If you need me to turn on CAM debugging *prior* to the above, I can do > > that, just let me know. > > > > The important step is #5. Without that, the problem shown in #9/10/11 > > does not happen. > > > > It's a good thing I don't run smartd(8) -- most users I see using that > > software set the interval to something like 180s or 60s. Imagine this > > frustration: "okay so the disk fell off the bus, but what, now I can't > > talk to it with SMART? Uhhh... <reboots> Err, works now? Whatever". > > I think, the problem may already be fixed in HEAD by r244014 by ken@. > I've just merged it to 9-STABLE at r247115. So if it is still possible > to reproduce the situation, it would be good to try. I think I've been having the same troubles since upgrading from 9.0, so I'm going to try applying that to 9.1-R and I'll also give feedback. Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADLo839OaZ-HfXW9HjKd0pTR66Sd4zzf8Y7ervZrb0-Oem4%2BcQ>