Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Jul 2005 22:33:57 +0200
From:      Emanuel Strobl <Emanuel.strobl@gmx.net>
To:        Chris Hodgins <christopher.hodgins@gmail.com>, freebsd-stable@freebsd.org
Subject:   Re: gmirror, sparc and SCSI problems
Message-ID:  <200507142234.05829@harrymail>
In-Reply-To: <63c3899e05071106495d288247@mail.gmail.com>
References:  <63c3899e05070807487e0891de@mail.gmail.com> <84C3BDA1-5523-4FA7-9832-E82A66D50ADE@gmail.com> <63c3899e05071106495d288247@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart5910950.ksYWNAVaaa
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Am Montag, 11. Juli 2005 15:49 CEST schrieb Chris Hodgins:
> On 7/10/05, Johannes Verwijnen <duvin1@gmail.com> wrote:
> > On Jul 9, 2005, at 19:36, Chris Hodgins wrote:
> > > It seems that gmirror does not give us any partitions.  A listing of
> > > the mirror directory shows only the gm0 node even though da0 is
> > > partitioned.  When mounting the mirror it seems that /dev/mirror/gm0
> > > only represents the root partition.  How can we get the mirror to
> > > recognise the other partitions?
> >
> >   I remember (vaguely)) this kind of problem, where when trying to
> > mirror a whole disk, you'd only get the first slice. Have you tried
> > mirroring the slices (da0s1 etc) separately?
> >
> > --
> > duvin
>
> Firstly thanks for all the suggestions.  We managed to build the
> mirrors by using the suggestion above mirroring the slices separately.
>  Unfortunetly, although the mirrors were created properly the
> filesystems are constantly suffering from inconsistencies and fsck
> actually appears to be segfaulting.

I can't help you with the fsck segfault, nor can I tell too much about=20
SPARC but I saw that you use a gmirror for swap.
Do you also have the problems when you use "shutdown -r now" instead of=20
"reeboot"?. If I remember correctly 5.4 shouldn't need "swapoff=3D"YES" to=
=20
be set in /etc/rc.conf but maybe the "reboot" issue still exists.

=2DHarry


> We have decided not to pursue this any further for the moment, however
> we are prepared to allow access to the machine should anyone wish to
> try and sort out this incompatibility with gmirror and sparc.
> Included below is a brief logfile of a reboot after fsck'ing all of
> the mirrored partitions.
>
> # reboot
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...0 0 done
> No buffers busy after final sync
> Uptime: 5m23s
> GEOM_MIRROR: Device gm0e: provider mirror/gm0e destroyed.
> GEOM_MIRROR: Device gm0e destroyed.
> GEOM_MIRROR: Device gm0d: provider mirror/gm0d destroyed.
> GEOM_MIRROR: Device gm0d destroyed.
> GEOM_MIRROR: Device gm0b: provider mirror/gm0b destroyed.
> GEOM_MIRROR: Device gm0b destroyed.
> GEOM_MIRROR: Device gm0a: provider mirror/gm0a destroyed.
> GEOM_MIRROR: Device gm0a destroyed.
> Rebooting...
> Resetti
> LOM event: +38d+3h37m11s host reset
> ng ...
>
> \uffff
> Processor Speed =3D 648 MHz
> Baud rate is 9600
> 8 Data bits, 1 stop bits, no parity (configured from lom)
>
> Firmware CORE  Sun Microsystems, Inc.
> @(#) core 1.0.12 2002/01/08 13:00
> Software Power ON
> Verifying NVRAM...Done
> Bootmode is 0
> [New I2C DIMM address]
> MCR0 =3D 57b2ce06
> MCR1 =3D 80008000
> MCR2 =3D cf3000ff
> MCR3 =3D a00000cf
> Ecache Size =3D 512 KB
> Clearing E$ Tags Done
> Clearing I/D TLBs Done
> Probing memory
> Done
> MEMBASE=3D0x40000000
> MEMSIZE=3D0x20000000
> Clearing memory...Done
> Turning ON MMUs Done
> Copy ROM to RAM (170040 bytes) Done
> Orig PC=3D0x1fff0007e44  New PC=3D0xf0f07e9c
> Processor Speed=3D648MHz
> Looking for Dropin FVM ... found
> Decompressing Client Done
> Transferring control to Client...
>
> ttya initialized
> Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
> Probing upa at 1f,0 pci pci pci
> Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
> Loading Support Packages: kbd-translator
> Loading onboard drivers: ebus flashprom eeprom idprom SUNW,lomh
> Probing /pci@1,1 Device 3  pmu i2c temperature dimm dimm i2c-nvram
>    idprom motherboard-fru fan-control
> lomp
> Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
> OpenBoot 4.0, 1024 MB memory installed, Serial #53833010.
> Ethernet address 0:3:ba:35:6d:32, Host ID: 83356d32.
>
>
>
> Executing last command: boot /pci@1f,0/pci@1/scsi@8/disk@0,0:a
>
> Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:a  File and args:
> >> FreeBSD/sparc64 boot block
>
>    Boot path:   /pci@1f,0/pci@1/scsi@8/disk@0,0:a
>    Boot loader: /boot/loader
> Console: Open Firmware console
>
> FreeBSD/sparc64 bootstrap loader, Revision 1.0
> (root@binkley.cse.buffalo.edu, Sun May  8 07:16:15 UTC 2005)
> bootpath=3D"/pci@1f,0/pci@1/scsi@8/disk@0,0:a"
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel data=3D0x3d8908+0x47c78 syms=3D[0x8+0x50b80+0x8+0x452=
60]
> /boot/kernel/geom_mirror.ko text=3D0x21558 data=3D0x5b0+0x18
> syms=3D[0x8+0x1638+0x8+0x10da]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> nothing to autoload yet.
> jumping to kernel entry at 0xc0040000.
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved. FreeBSD 5.4-RELEASE #0: Sun May  8 22:21:34 UTC 2005
>     root@binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "tick" frequency 648000000 Hz quality 1000
> real memory  =3D 1073741824 (1024 MB)
> avail memory =3D 1025818624 (978 MB)
> cpu0: Sun Microsystems UltraSparc-IIe Processor (648.00 MHz CPU)
> nexus0: <Open Firmware Nexus device>
> pcib0: <U2P UPA-PCI bridge> on nexus0
> pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
> pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
> pci0: <OFW PCI bus> on pcib0
> pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
> pci1: <OFW PCI bus> on pcib1
> ebus0: <PCI-EBus3 bridge> mem
> 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci1
> ebus0: <idprom>: incomplete
> ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
> eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
> eeprom0: model mk48t59
> eeprom0: hostid 0
> ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver
> attached) pci1: <old, non-VGA display device> at device 3.0 (no driver
> attached) pci1: <old, non-VGA display device> at device 3.0 (no driver
> attached) isab0: <PCI-ISA bridge> at device 7.0 on pci1
> isa0: <ISA bus> on isab0
> gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff at
> device 12.1 on pci1
> miibus0: <MII bus> on gem0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> gem0: 2kB RX FIFO, 2kB TX FIFO
> gem0: Ethernet address: 00:03:ba:35:6d:32
> gem0: if_start running deferred for Giant
> pci1: <serial bus, USB> at device 12.3 (no driver attached)
> atapci0: <AcerLabs Aladdin UDMA66 controller> port
> 0x420-0x42f,0x408-0x40b,0x410-0x417,0x418-0x41b,0x400-0x407 at device
> 13.0 on pci1
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> gem1: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0440000-0xe045ffff at
> device 5.1 on pci1miibus1: <MII bus> on gem1
> ukphy1: <Generic IEEE 802.3u media interface> on miibus1
> ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> gem1: 2kB RX FIFO, 2kB TX FIFO
> gem1: Ethernet address: 00:03:ba:35:6d:32
> gem1: if_start running deferred for Giant
> pci1: <serial bus, USB> at device 5.3 (no driver attached)
> pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
> pci2: <OFW PCI bus> on pcib2
> sym0: <896> port 0xc00000-0xc000ff mem 0x4000-0x5fff,0x2000-0x23ff at
> device 8.0 on pci2
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym1: <896> port 0xc00100-0xc001ff mem 0x8000-0x9fff,0x6000-0x63ff at
> device 8.1 on pci2
> sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 on isa0
> uart0: console (9600,n,8,1)
> uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 4 on isa0
> Timecounters tick every 10.000 msec
> acd0: CDRW <CD-224E/P.9A> at ata2-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00
> error=3D4<ABORTED> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11
> ascq=3D0x00 error=3D4<ABORTED> da0 at sym0 bus 0 target 0 lun 0
> da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
> da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
> Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
> da1 at sym0 bus 0 target 1 lun 0
> da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
> da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
> Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
> GEOM_MIRROR: Device gm0a created (id=3D4086462658).
> GEOM_MIRROR: Device gm0a: provider da0a detected.
> GEOM_MIRROR: Device gm0b created (id=3D119591469).
> GEOM_MIRROR: Device gm0b: provider da0b detected.
> GEOM_MIRROR: Device gm0d created (id=3D701152197).
> GEOM_MIRROR: Device gm0d: provider da0d detected.
> GEOM_MIRROR: Device gm0e created (id=3D2934901561).
> GEOM_MIRROR: Device gm0e: provider da0e detected.
> GEOM_MIRROR: Device gm0a: provider da1a detected.
> GEOM_MIRROR: Device gm0a: provider da1a activated.
> GEOM_MIRROR: Device gm0b: provider da1b detected.
> GEOM_MIRROR: Device gm0a: provider da0a activated.
> GEOM_MIRROR: Device gm0a: provider mirror/gm0a launched.
> GEOM_MIRROR: Device gm0b: provider da1b activated.
> GEOM_MIRROR: Device gm0b: provider da0b activated.
> GEOM_MIRROR: Device gm0b: provider mirror/gm0b launched.
> GEOM_MIRROR: Device gm0d: provider da1d detected.
> GEOM_MIRROR: Device gm0d: provider da1d activated.
> GEOM_MIRROR: Device gm0e: provider da1e detected.
> GEOM_MIRROR: Device gm0d: provider da0d activated.
> GEOM_MIRROR: Device gm0d: provider mirror/gm0d launched.
> GEOM_MIRROR: Device gm0e: provider da1e activated.
> GEOM_MIRROR: Device gm0e: provider da0e activated.
> GEOM_MIRROR: Device gm0e: provider mirror/gm0e launched.
> Mounting root from ufs:/dev/mirror/gm0a
> Pre-seeding PRNG: kickstart.
> Loading configuration files.
> Entropy harvesting: interrupts ethernet point_to_point kickstart.
> swapon: adding /dev/mirror/gm0b as swap device
> Starting file system checks:
> /dev/mirror/gm0a: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/mirror/gm0a: clean, 487361 free (1001 frags, 60795 blocks, 0.2%
> fragmentation)
> /dev/mirror/gm0d: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/mirror/gm0d: clean, 2363343 free (14703 frags, 293580 blocks,
> 0.6% fragmentation)
> /dev/mirror/gm0e: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/mirror/gm0e: clean, 1012436 free (100 frags, 126542 blocks, 0.0%
> fragmentation)
> mode =3D 0100644, inum =3D 188424, fs =3D /var
> panic: ffs_valloc: dup alloc
> cpuid =3D 0
> Uptime: 25s
> GEOM_MIRROR: Device gm0e: provider mirror/gm0e destroyed.
> GEOM_MIRROR: Device gm0e destroyed.
> GEOM_MIRROR: Device gm0d: provider mirror/gm0d destroyed.
> GEOM_MIRROR: Device gm0d destroyed.
> GEOM_MIRROR: Device gm0b: provider mirror/gm0b destroyed.
> GEOM_MIRROR: Device gm0b destroyed.
> GEOM_MIRROR: Device gm0a: provider mirror/gm0a destroyed.
> GEOM_MIRROR: Device gm0a destroyed.
> Cannot dump. No dump device defined.
> Automatic reboot in 15 seconds - press a key on the console to abort
> Rebooting...
> Resetti
> LOM event: +38d+3h38m51s host reset
> ng ...
>
> \uffff
> Processor Speed =3D 648 MHz
> Baud rate is 9600
> 8 Data bits, 1 stop bits, no parity (configured from lom)
>
> Firmware CORE  Sun Microsystems, Inc.
> @(#) core 1.0.12 2002/01/08 13:00
> Software Power ON
> Verifying NVRAM...Done
> Bootmode is 0
> [New I2C DIMM address]
> MCR0 =3D 57b2ce06
> MCR1 =3D 80008000
> MCR2 =3D cf3000ff
> MCR3 =3D a00000cf
> Ecache Size =3D 512 KB
> Clearing E$ Tags Done
> Clearing I/D TLBs Done
> Probing memory
> Done
> MEMBASE=3D0x40000000
> MEMSIZE=3D0x20000000
> Clearing memory...Done
> Turning ON MMUs Done
> Copy ROM to RAM (170040 bytes) Done
> Orig PC=3D0x1fff0007e44  New PC=3D0xf0f07e9c
> Processor Speed=3D648MHz
> Looking for Dropin FVM ... found
> Decompressing Client Done
> Transferring control to Client...
>
> ttya initialized
> Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
> Probing upa at 1f,0 pci pci pci
> Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb)
> Loading Support Packages: kbd-translator
> Loading onboard drivers: ebus flashprom eeprom idprom SUNW,lomh
> Probing /pci@1,1 Device 3  pmu i2c temperature dimm dimm i2c-nvram
>    idprom motherboard-fru fan-control
> lomp
> Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
> OpenBoot 4.0, 1024 MB memory installed, Serial #53833010.
> Ethernet address 0:3:ba:35:6d:32, Host ID: 83356d32.
>
>
>
> Executing last command: boot /pci@1f,0/pci@1/scsi@8/disk@0,0:a
>
> Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:a  File and args:
> >> FreeBSD/sparc64 boot block
>
>    Boot path:   /pci@1f,0/pci@1/scsi@8/disk@0,0:a
>    Boot loader: /boot/loader
> Console: Open Firmware console
>
> FreeBSD/sparc64 bootstrap loader, Revision 1.0
> (root@binkley.cse.buffalo.edu, Sun May  8 07:16:15 UTC 2005)
> bootpath=3D"/pci@1f,0/pci@1/scsi@8/disk@0,0:a"
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel data=3D0x3d8908+0x47c78 syms=3D[0x8+0x50b80+0x8+0x452=
60]
> /boot/kernel/geom_mirror.ko text=3D0x21558 data=3D0x5b0+0x18
> syms=3D[0x8+0x1638+0x8+0x10da]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> nothing to autoload yet.
> jumping to kernel entry at 0xc0040000.
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved. FreeBSD 5.4-RELEASE #0: Sun May  8 22:21:34 UTC 2005
>     root@binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "tick" frequency 648000000 Hz quality 1000
> real memory  =3D 1073741824 (1024 MB)
> avail memory =3D 1025818624 (978 MB)
> cpu0: Sun Microsystems UltraSparc-IIe Processor (648.00 MHz CPU)
> nexus0: <Open Firmware Nexus device>
> pcib0: <U2P UPA-PCI bridge> on nexus0
> pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
> pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
> pci0: <OFW PCI bus> on pcib0
> pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
> pci1: <OFW PCI bus> on pcib1
> ebus0: <PCI-EBus3 bridge> mem
> 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci1
> ebus0: <idprom>: incomplete
> ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
> eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
> eeprom0: model mk48t59
> eeprom0: hostid 0
> ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver
> attached) pci1: <old, non-VGA display device> at device 3.0 (no driver
> attached) pci1: <old, non-VGA display device> at device 3.0 (no driver
> attached) isab0: <PCI-ISA bridge> at device 7.0 on pci1
> isa0: <ISA bus> on isab0
> gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff at
> device 12.1 on pci1
> miibus0: <MII bus> on gem0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> gem0: 2kB RX FIFO, 2kB TX FIFO
> gem0: Ethernet address: 00:03:ba:35:6d:32
> gem0: if_start running deferred for Giant
> pci1: <serial bus, USB> at device 12.3 (no driver attached)
> atapci0: <AcerLabs Aladdin UDMA66 controller> port
> 0x420-0x42f,0x408-0x40b,0x410-0x417,0x418-0x41b,0x400-0x407 at device
> 13.0 on pci1
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> gem1: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0440000-0xe045ffff at
> device 5.1 on pci1miibus1: <MII bus> on gem1
> ukphy1: <Generic IEEE 802.3u media interface> on miibus1
> ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> gem1: 2kB RX FIFO, 2kB TX FIFO
> gem1: Ethernet address: 00:03:ba:35:6d:32
> gem1: if_start running deferred for Giant
> pci1: <serial bus, USB> at device 5.3 (no driver attached)
> pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
> pci2: <OFW PCI bus> on pcib2
> sym0: <896> port 0xc00000-0xc000ff mem 0x4000-0x5fff,0x2000-0x23ff at
> device 8.0 on pci2
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym1: <896> port 0xc00100-0xc001ff mem 0x8000-0x9fff,0x6000-0x63ff at
> device 8.1 on pci2
> sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 on isa0
> uart0: console (9600,n,8,1)
> uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 4 on isa0
> Timecounters tick every 10.000 msec
> acd0: CDRW <CD-224E/P.9A> at ata2-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11 ascq=3D0x00
> error=3D4<ABORTED> acd0: FAILURE - READ_BIG MEDIUM ERROR asc=3D0x11
> ascq=3D0x00 error=3D4<ABORTED> da0 at sym0 bus 0 target 0 lun 0
> da0: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
> da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
> Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
> da1 at sym0 bus 0 target 1 lun 0
> da1: <SEAGATE ST336607LSUN36G 0207> Fixed Direct Access SCSI-3 device
> da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
> Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
> GEOM_MIRROR: Device gm0a created (id=3D4086462658).
> GEOM_MIRROR: Device gm0a: provider da0a detected.
> GEOM_MIRROR: Device gm0b created (id=3D119591469).
> GEOM_MIRROR: Device gm0b: provider da0b detected.
> GEOM_MIRROR: Device gm0d created (id=3D701152197).
> GEOM_MIRROR: Device gm0d: provider da0d detected.
> GEOM_MIRROR: Device gm0e created (id=3D2934901561).
> GEOM_MIRROR: Device gm0e: provider da0e detected.
> GEOM_MIRROR: Device gm0a: provider da1a detected.
> GEOM_MIRROR: Device gm0a: provider da1a activated.
> GEOM_MIRROR: Device gm0b: provider da1b detected.
> GEOM_MIRROR: Device gm0a: provider da0a activated.
> GEOM_MIRROR: Device gm0a: provider mirror/gm0a launched.
> GEOM_MIRROR: Device gm0b: provider da1b activated.
> GEOM_MIRROR: Device gm0b: provider da0b activated.
> GEOM_MIRROR: Device gm0b: provider mirror/gm0b launched.
> GEOM_MIRROR: Device gm0d: provider da1d detected.
> GEOM_MIRROR: Device gm0d: provider da1d activated.
> GEOM_MIRROR: Device gm0e: provider da1e detected.
> GEOM_MIRROR: Device gm0d: provider da0d activated.
> GEOM_MIRROR: Device gm0d: provider mirror/gm0d launched.
> GEOM_MIRROR: Device gm0e: provider da1e activated.
> GEOM_MIRROR: Device gm0e: provider da0e activated.
> GEOM_MIRROR: Device gm0e: provider mirror/gm0e launched.
> Mounting root from ufs:/dev/mirror/gm0a
> WARNING: / was not properly dismounted
> Pre-seeding PRNG: kickstart.
> Loading configuration files.
> Entropy harvesting: interrupts ethernet point_to_point kickstart.
> swapon: adding /dev/mirror/gm0b as swap device
> Starting file system checks:
> /dev/mirror/gm0a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
> /dev/mirror/gm0a: SUMMARY INFORMATION BAD (SALVAGED)
> /dev/mirror/gm0a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
> /dev/mirror/gm0a: 846 files, 19190 used, 487362 free (1002 fragpid 86
> (fsck), uid 0: exited on signal 11
> s, 60795 blocks, 0.2% fragmentation)
> /dev/da0d: DEFER FOR BACKGROUND CHECKING
> /dev/da0e: DEFER FOR BACKGROUND CHECKING
> Segmentation fault
> Unknown error; help!
>  Enter full pathname of shell or RETURN for /bin/sh:
>
>
> Thanks
> Chris
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
> "freebsd-stable-unsubscribe@freebsd.org"

--nextPart5910950.ksYWNAVaaa
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)

iD8DBQBC1sw9Bylq0S4AzzwRAqenAJ9wJVdnsjsozXQDsgXGuqHSG/lSlgCfVGSQ
yFsMFLK6ctP4oZrdkoiAcdA=
=Xt7w
-----END PGP SIGNATURE-----

--nextPart5910950.ksYWNAVaaa--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507142234.05829>