Date: Mon, 28 May 2001 20:33:08 -0700 From: "Eric Rosenberry" <eric@rosenberry.org> To: "Mobile@Freebsd. Org" <mobile@freebsd.org> Subject: More info on Linksys Wireless Card (WPC11) Message-ID: <GLEOKLAKEIBLAAKKFHEIKELICDAA.eric@rosenberry.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C0E7B5.67E74340
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
I have been trying to get a Linksys Wireless card (model WPC11) working in
FreeBSD 4.3 (Generic kernel).
It has been suggested that the wi driver should work for this card.
I made an entry in my /etc/pccard.conf file and I have got it loading the wi
driver.
When I insert the card, it detects it, loads the driver, and it can grab the
MAC address of the card. It then makes an Ethernet device that shows up in
ifconfig. However, it would seem if I try to DO anything to the card beyond
just inserting it and loading the driver that it locks my machine
(specifically trying to assign it an IP address).
I have attached my dmesg, the output of "pccardc dumpcis", my
/etc/pccard.conf, and the output of ifconfig.
My guess is that it does something *slightly* differently than other
standard Prism II cards that is causing issues. Other possibilities include
address conflicts on my machine however I have used other regular Ethernet
adaptors in it and they have worked fine.
Any help is greatly appreciated.
P.S. Is there any other debugging information that would be helpful?
Thanks!
-Eric
------=_NextPart_000_0005_01C0E7B5.67E74340
Content-Type: application/octet-stream;
name="pccard.conf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="pccard.conf"
# Linksys WPC11 (Intersil Chipset)=0A=
card "Instant Wireless " " Network PC CARD"=0A=
config auto "wi" ?=0A=
insert /etc/pccard_ether $device start=0A=
remove /etc/pccard_ether $device stop=0A=
------=_NextPart_000_0005_01C0E7B5.67E74340
Content-Type: text/plain;
name="dumpcis.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dumpcis.txt"
Configuration data for card in slot 0=0A=
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2=0A=
000: 00 ff=0A=
Common memory device information:=0A=
Device number 1, type No device, WPS =3D OFF=0A=
Speed =3D No speed, Memory block size =3D reserved, 32 units=0A=
Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 3=0A=
000: 43 02 ff=0A=
Attribute memory device information:=0A=
Device number 1, type EEPROM, WPS =3D OFF=0A=
Speed =3D 150nS, Memory block size =3D 8Kb, 1 units=0A=
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4=0A=
000: 01 01 74 05=0A=
PCMCIA ID =3D 0x101, OEM ID =3D 0x574=0A=
Tuple #4, code =3D 0x21 (Functional ID), length =3D 2=0A=
000: 06 00=0A=
Network/LAN adapter=0A=
Tuple #5, code =3D 0x15 (Version 1 info), length =3D 33=0A=
000: 04 01 33 43 6f 6d 00 4f 66 66 69 63 65 43 6f 6e=0A=
010: 6e 65 63 74 20 35 37 32 42 00 42 00 30 30 31 00=0A=
020: ff=0A=
Version =3D 4.1, Manuf =3D [3Com], card vers =3D [OfficeConnect 572B]=0A=
Addit. info =3D [B],[001]=0A=
Tuple #6, code =3D 0x1a (Configuration map), length =3D 6=0A=
000: 02 03 00 00 01 03=0A=
Reg len =3D 3, config register addr =3D 0x10000, last config =3D 0x3=0A=
Registers: XX------ =0A=
Tuple #7, code =3D 0x1b (Configuration entry), length =3D 15=0A=
000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff=0A=
Config index =3D 0x1(default)=0A=
Interface byte =3D 0x1 (I/O)=0A=
Vcc pwr:=0A=
Nominal operating supply voltage: 5 x 1V=0A=
Max current average over 1 second: 3 x 10mA=0A=
Max current average over 10 ms: 5 x 10mA=0A=
Power down supply current: 5 x 1mA=0A=
Wait scale Speed =3D 7.0 x 100 ns=0A=
RDY/BSY scale Speed =3D 5.0 x 100 us=0A=
Card decodes 5 address lines, full 8/16 Bit I/O=0A=
IRQ modes: Level=0A=
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=0A=
Tuple #8, code =3D 0x19 (JEDEC descr for attribute memory), length =3D 3=0A=
000: 00 00 ff=0A=
Tuple #9, code =3D 0x14 (No link), length =3D 0=0A=
Tuple #10, code =3D 0x10 (Checksum), length =3D 5=0A=
000: aa ff 5f 00 00=0A=
Checksum from offset 65450, length 95, value is 0x0=0A=
Tuple #11, code =3D 0xff (Terminator), length =3D 0=0A=
Configuration data for card in slot 1=0A=
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 3=0A=
000: 00 00 ff=0A=
Common memory device information:=0A=
Device number 1, type No device, WPS =3D OFF=0A=
Speed =3D No speed, Memory block size =3D 512b, 1 units=0A=
Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 4=0A=
000: 67 5a 08 ff=0A=
Attribute memory device information:=0A=
Device number 1, type SRAM, WPS =3D OFF=0A=
Speed =3D 5.0 x 100 ns, Memory block size =3D reserved, 32 units=0A=
Device number 2, type No device, WPS =3D OFF=0A=
Speed =3D No speed, Memory block size =3D 512b, 1 units=0A=
Tuple #3, code =3D 0x1d (Other conditions for attribute memory), length =
=3D 5=0A=
000: 01 67 5a 08 ff=0A=
(MWAIT)=0A=
Tuple #4, code =3D 0x15 (Version 1 info), length =3D 80=0A=
000: 05 00 49 6e 73 74 61 6e 74 20 57 69 72 65 6c 65=0A=
010: 73 73 20 00 20 4e 65 74 77 6f 72 6b 20 50 43 20=0A=
020: 43 41 52 44 00 56 65 72 73 69 6f 6e 20 30 31 2e=0A=
030: 30 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00=0A=
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff=0A=
Version =3D 5.0, Manuf =3D [Instant Wireless ], card vers =3D [ Network =
PC CARD]=0A=
Addit. info =3D [Version 01.02],[]=0A=
Tuple #5, code =3D 0x20 (Manufacturer ID), length =3D 4=0A=
000: 56 01 02 00=0A=
PCMCIA ID =3D 0x156, OEM ID =3D 0x2=0A=
Tuple #6, code =3D 0x21 (Functional ID), length =3D 2=0A=
000: 06 00=0A=
Network/LAN adapter=0A=
Tuple #7, code =3D 0x22 (Functional EXT), length =3D 2=0A=
000: 01 07=0A=
Network technology: Wireless=0A=
Tuple #8, code =3D 0x22 (Functional EXT), length =3D 5=0A=
000: 02 40 42 0f 00=0A=
Network speed: 1 Mb/sec=0A=
Tuple #9, code =3D 0x22 (Functional EXT), length =3D 5=0A=
000: 02 80 84 1e 00=0A=
Network speed: 2 Mb/sec=0A=
Tuple #10, code =3D 0x22 (Functional EXT), length =3D 5=0A=
000: 02 60 ec 53 00=0A=
Network speed: 5 Mb/sec=0A=
Tuple #11, code =3D 0x22 (Functional EXT), length =3D 5=0A=
000: 02 c0 d8 a7 00=0A=
Network speed: 11 Mb/sec=0A=
Tuple #12, code =3D 0x22 (Functional EXT), length =3D 2=0A=
000: 03 07=0A=
Network media: 2.4 GHz=0A=
Tuple #13, code =3D 0x22 (Functional EXT), length =3D 8=0A=
000: 04 06 00 04 5a 0d 90 95=0A=
Network node ID: 00 04 5a 0d 90 95=0A=
Tuple #14, code =3D 0x22 (Functional EXT), length =3D 2=0A=
000: 05 01=0A=
Network connector: closed connector standard=0A=
Tuple #15, code =3D 0x1a (Configuration map), length =3D 7=0A=
000: 03 01 e0 03 00 00 01=0A=
Reg len =3D 4, config register addr =3D 0x3e0, last config =3D 0x1=0A=
Registers: X------- =0A=
Tuple #16, code =3D 0x1b (Configuration entry), length =3D 15=0A=
000: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff=0A=
Config index =3D 0x1(default)=0A=
Interface byte =3D 0x1 (I/O)=0A=
Vcc pwr:=0A=
Minimum operating supply voltage: 4 x 1V, ext =3D 0x4b=0A=
Maximum operating supply voltage: 5 x 1V, ext =3D 0x19=0A=
Max current average over 1 second: 3 x 100mA=0A=
Max current average over 10 ms: 3 x 100mA=0A=
Power down supply current: 1 x 10mA=0A=
Card decodes 6 address lines, limited 8/16 Bit I/O=0A=
IRQ modes: Level, Pulse=0A=
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=0A=
Tuple #17, code =3D 0xff (Terminator), length =3D 0=0A=
2 slots found=0A=
------=_NextPart_000_0005_01C0E7B5.67E74340
Content-Type: text/plain;
name="ifconfig.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="ifconfig.txt"
lp0: flags=3D8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500=0A=
faith0: flags=3D8000<MULTICAST> mtu 1500=0A=
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif1: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif2: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
gif3: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280=0A=
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384=0A=
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 =0A=
inet6 ::1 prefixlen 128 =0A=
inet 127.0.0.1 netmask 0xff000000 =0A=
ppp0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500=0A=
sl0: flags=3Dc010<POINTOPOINT,LINK2,MULTICAST> mtu 552=0A=
ep0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A=
inet 192.168.1.46 netmask 0xffffff00 broadcast 192.168.1.255=0A=
inet6 fe80::250:daff:fe52:f911%ep0 prefixlen 64 scopeid 0xa =0A=
ether 00:50:da:52:f9:11 =0A=
wi0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500=0A=
ether 80:eb:15:c1:80:a1 =0A=
------=_NextPart_000_0005_01C0E7B5.67E74340
Content-Type: application/octet-stream;
name="dmesg.boot"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.boot"
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001=0A=
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1=0A=
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A=
real memory =3D 268369920 (262080K bytes)=0A=
avail memory =3D 256917504 (250896K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc044d000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11=0A=
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0=0A=
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0=0A=
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq =
5 at device 7.2 on pci0=0A=
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0=0A=
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff =
irq 5 at device 8.0 on pci0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0=0A=
pcic0: Polling mode=0A=
pccard0: <PC Card bus -- kludge version> on pcic0=0A=
pccard1: <PC Card bus -- kludge version> on pcic0=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/7 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
pccard: card inserted, slot 0=0A=
ata1-slave: ata_command: timeout waiting for intr=0A=
ata1-slave: identify failed=0A=
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33=0A=
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0=0A=
wi0: Ethernet address: 00:ec:15:c1:80:94=0A=
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `syncer' to stop...stopped=0A=
=0A=
syncing disks... 4 4 1 =0A=
done=0A=
Uptime: 3m47s=0A=
Rebooting...=0A=
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001=0A=
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1=0A=
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A=
real memory =3D 268369920 (262080K bytes)=0A=
avail memory =3D 256917504 (250896K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc044d000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11=0A=
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0=0A=
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0=0A=
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq =
5 at device 7.2 on pci0=0A=
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0=0A=
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff =
irq 5 at device 8.0 on pci0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0=0A=
pcic0: Polling mode=0A=
pccard0: <PC Card bus -- kludge version> on pcic0=0A=
pccard1: <PC Card bus -- kludge version> on pcic0=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/7 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
pccard: card inserted, slot 0=0A=
ata1-slave: ata_command: timeout waiting for intr=0A=
ata1-slave: identify failed=0A=
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33=0A=
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
awi0: awi_pccard_probe: bad banner: 00 00 00 00 00 00 00 00 00 00 00 00=0A=
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped=0A=
Waiting (max 60 seconds) for system process `syncer' to stop...stopped=0A=
=0A=
syncing disks... 4 4 2 =0A=
done=0A=
Uptime: 4m36s=0A=
Rebooting...=0A=
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001=0A=
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1=0A=
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A=
real memory =3D 268369920 (262080K bytes)=0A=
avail memory =3D 256917504 (250896K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc044d000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11=0A=
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0=0A=
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0=0A=
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq =
5 at device 7.2 on pci0=0A=
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0=0A=
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff =
irq 5 at device 8.0 on pci0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0=0A=
pcic0: Polling mode=0A=
pccard0: <PC Card bus -- kludge version> on pcic0=0A=
pccard1: <PC Card bus -- kludge version> on pcic0=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/7 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
pccard: card inserted, slot 0=0A=
ata1-slave: ata_command: timeout waiting for intr=0A=
ata1-slave: identify failed=0A=
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33=0A=
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0=0A=
wi0: Ethernet address: 00:ec:15:c1:00:95=0A=
wi0: failed to allocate 1594 bytes on NIC=0A=
wi0: tx buffer allocation failed=0A=
wi0: failed to allocate 1594 bytes on NIC=0A=
wi0: mgmt. buffer allocation failed=0A=
wi0: xmit failed=0A=
wi0: unload=0A=
wi0: detached=0A=
pccard: card removed, slot 0=0A=
stray irq 10=0A=
=0A=
=0A=
Fatal trap 12: page fault while in kernel mode=0A=
fault virtual address =3D 0x303031f=0A=
fault code =3D supervisor read, page not present=0A=
instruction pointer =3D 0x8:0xc01f65e9=0A=
stack pointer =3D 0x10:0xcd04bcd4=0A=
frame pointer =3D 0x10:0xcd04bd18=0A=
code segment =3D base 0x0, limit 0xfffff, type 0x1b=0A=
=3D DPL 0, pres 1, def32 1, gran 1=0A=
processor eflags =3D interrupt enabled, resume, IOPL =3D 0=0A=
current process =3D 258 (ifconfig)=0A=
interrupt mask =3D =0A=
trap number =3D 12=0A=
panic: page fault=0A=
=0A=
syncing disks... =0A=
done=0A=
Uptime: 18m6s=0A=
Automatic reboot in 15 seconds - press a key on the console to abort=0A=
Rebooting...=0A=
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001=0A=
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1=0A=
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A=
real memory =3D 268369920 (262080K bytes)=0A=
avail memory =3D 256917504 (250896K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc044d000.=0A=
Pentium Pro MTRR support enabled=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11=0A=
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0=0A=
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0=0A=
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]=0A=
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq =
5 at device 7.2 on pci0=0A=
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0=0A=
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff =
irq 5 at device 8.0 on pci0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0=0A=
pcic0: Polling mode=0A=
pccard0: <PC Card bus -- kludge version> on pcic0=0A=
pccard1: <PC Card bus -- kludge version> on pcic0=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/7 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ata1-slave: ata_command: timeout waiting for intr=0A=
ata1-slave: identify failed=0A=
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33=0A=
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4=0A=
Mounting root from ufs:/dev/ad0s2a=0A=
WARNING: / was not properly dismounted=0A=
------=_NextPart_000_0005_01C0E7B5.67E74340--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GLEOKLAKEIBLAAKKFHEIKELICDAA.eric>