Date: Mon, 27 Oct 2014 17:20:35 +0100 From: Borja Marcos <borjam@sarenet.es> To: Wes Morgan <morganw@chemikals.org> Cc: freebsd-scsi@freebsd.org Subject: Re: MPS driver and latest firmware Message-ID: <DD2BE91C-ADB0-4D75-950D-654A388208AE@sarenet.es> In-Reply-To: <CALCz5MH47gm-2m9bXbb9dVn-jnOTOBsqFqom-aSGgBdkS83QOg@mail.gmail.com> References: <CALCz5MH47gm-2m9bXbb9dVn-jnOTOBsqFqom-aSGgBdkS83QOg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Oct 26, 2014, at 11:00 PM, Wes Morgan wrote: > Hi all, >=20 > I have an LSI 9201-16I controller that I updated to the latest = firmware > (20.00.00.00). Immediately I began seeing CAM errors like this: >=20 > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): CAM status: SCSI > Status Error > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI status: = Check > Condition > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI sense: = ABORTED > COMMAND asc:47,3 (Information unit iuCRC error detected) > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): Retrying command = (per > sense data) >=20 > It did not seem to cause any data corruption, but needless to say that = kind > of error is disconcerting. I was able to force a downgrade to the > 19.00.00.00 firmware in FreeDOS, after which everything returned to = normal. I tried in a full functional system and I also suffered errors. I had to downgrade as well. In case anyone runs into the same problem, the card required a flash erase (sas2flsh -o -e 6) before being able to = upload the P19 firmware, as the NVRAM data was migrated to a new format. I wonder if the NVRAM changes include that "sticky" target ID = behavior... And no, this is not a production system, just testing ;) Cheers, Borja. ----------- This is some log information from my change. I upgraded the firmware to P20 from sas2flash running on FreeBSD. Before = doing it I exported the ZFS pool in order to avoid aborted commands leading to corruption. This is the syslog showing the controller having problems after the = update to P20: Oct 27 16:26:07 elibm kernel: mps0: Reinitializing controller, Oct 27 16:26:15 elibm kernel: mps0: Warning: io_cmds_active is out of = sync - resynching to 0 Oct 27 16:26:16 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: = 19.00.00.00-fbsd Oct 27 16:26:16 elibm kernel: mps0: IOCCapabilities: = 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>= Oct 27 16:26:16 elibm kernel: mps0: mps_reinit finished sc = 0xfffffe0000d84000 post 4 free 3 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 = e3 d3 38 00 00 e0 00 length 114688 SMID 706 command timeout cm = 0xfffffe04976a1ea0 ccb 0xfffff80a8d573800 Oct 27 16:28:30 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 = Aborting command 0xfffffe04976a1ea0 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 = e3 d2 58 00 00 e0 00 length 114688 SMID 738 command timeout cm = 0xfffffe04976a48a0 ccb 0xfffff80a8d5bc800 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 = e3 d2 58 00 00 e0 00 length 114688 SMID 738 terminated ioc 804b scsi 0 = state c xfer 112648 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 = e3 d3 38 00 00 e0 00=20 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): CAM status: Command = timeout Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): Retrying command Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 = e3 d3 38 00 00 e0 00=20 Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status = Error Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check = Condition Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): Retrying command (per = sense data) Oct 27 16:29:31 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e5 25 48 00 00 e0 00 length 114688 SMID 995 command timeout cm = 0xfffffe04976b99f0 ccb 0xfffff80a3b6c5000 Oct 27 16:29:31 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 = Aborting command 0xfffffe04976b99f0 Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e5 25 48 00 00 e0 00=20 Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: Command = timeout Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e5 25 48 00 00 e0 00=20 Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status = Error Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check = Condition Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command (per = sense data) Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 11 26 50 00 00 e0 00 length 114688 SMID 358 command timeout cm = 0xfffffe04976855e0 ccb 0xfffff8017f856800 Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 = Aborting command 0xfffffe04976855e0 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 = 11 26 30 00 00 e0 00 length 114688 SMID 432 command timeout cm = 0xfffffe049768b700 ccb 0xfffff80a8d5e8800 Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 4 = Aborting command 0xfffffe049768b700 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 = 11 25 50 00 00 e0 00 length 114688 SMID 356 command timeout cm = 0xfffffe0497685340 ccb 0xfffff80a3b9c1000 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 = 70 6a 10 00 00 10 00 length 8192 SMID 346 command timeout cm = 0xfffffe0497684620 ccb 0xfffff80a8d5af000 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 = 70 68 10 00 00 10 00 length 8192 SMID 500 command timeout cm = 0xfffffe0497691040 ccb 0xfffff80a8d57c000 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(6). CDB: 08 00 02 = 10 10 00 length 8192 SMID 371 command timeout cm 0xfffffe04976866f0 ccb = 0xfffff80a8d56c800 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 11 27 30 00 00 e0 00 length 114688 SMID 321 command timeout cm = 0xfffffe0497682550 ccb 0xfffff80a915c5000 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 11 26 50 00 00 e0 00=20 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 = 70 6a 10 00 00 10 00 length 8192 SMID 346 terminated ioc 804b scsi 0 = state c xfer (da5:mps0:0:14:0): CAM status: Command timeout Oct 27 16:30:33 elibm kernel: (da5: (da5:mps0:0:14:0): READ(10). = CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 500 terminated ioc = 804b scsi 0 state c xfer mps0:0:0 Oct 27 16:30:33 elibm kernel: 14: (da5:mps0:0:14:0): READ(6). CDB: = 08 00 02 10 10 00 length 8192 SMID 371 terminated ioc 804b scsi 0 state = c xfer 0 Oct 27 16:30:33 elibm kernel: 0): (da5:mps0:0:14:0): READ(10). = CDB: 28 00 01 11 27 30 00 00 e0 00 length 114688 SMID 321 terminated ioc = 804b scsi 0 state c xfeRetrying command Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 = 11 25 50 00 00 e0 00 length 114688 SMID 356 terminated ioc 804b scsi 0 = state c xfer 112648 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 = 11 26 30 00 00 e0 00=20 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): CAM status: Command = timeout Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): Retrying command Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 = 11 26 30 00 00 e0 00=20 Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 = 70 6a 10 00 00 10 00=20 Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status = Error Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status = Error Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check = Condition Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check = Condition Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:30:34 elibm kernel: (da2:(da5:mps0:0:mps0:0:11:14:0): 0): = Retrying command (per sense data) Oct 27 16:36:28 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem = 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on = pci17 Oct 27 16:36:28 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: = 19.00.00.00-fbsd Oct 27 16:36:28 elibm kernel: mps0: IOCCapabilities: = 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>= Oct 27 16:36:28 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 Oct 27 16:36:28 elibm kernel: ses1 at mps0 bus 0 scbus0 target 26 lun 0 Oct 27 16:36:28 elibm kernel: da0 at mps0 bus 0 scbus0 target 9 lun 0 Oct 27 16:36:28 elibm kernel: da1 at mps0 bus 0 scbus0 target 10 lun 0 Oct 27 16:36:28 elibm kernel: da2 at mps0 bus 0 scbus0 target 11 lun 0 Oct 27 16:36:28 elibm kernel: da3 at mps0 bus 0 scbus0 target 12 lun 0 Oct 27 16:36:28 elibm kernel: da5 at mps0 bus 0 scbus0 target 14 lun 0 Oct 27 16:36:28 elibm kernel: da4 at mps0 bus 0 scbus0 target 13 lun 0 Oct 27 16:36:28 elibm kernel: da6 at mps0 bus 0 scbus0 target 17 lun 0 Oct 27 16:36:28 elibm kernel: da7 at mps0 bus 0 scbus0 target 18 lun 0 Oct 27 16:36:28 elibm kernel: da9 at mps0 bus 0 scbus0 target 21 lun 0 Oct 27 16:36:28 elibm kernel: da8 at mps0 bus 0 scbus0 target 20 lun 0 Oct 27 16:36:28 elibm kernel: da12 at mps0 bus 0 scbus0 target 27 lun 0 Oct 27 16:36:28 elibm kernel: da10 at mps0 bus 0 scbus0 target 22 lun 0 Oct 27 16:36:28 elibm kernel: da11 at mps0 bus 0 scbus0 target 23 lun 0 Oct 27 16:37:24 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e6 5d 08 00 00 28 00 length 20480 SMID 396 command timeout cm = 0xfffffe0000e547c0 ccb 0xfffff800261ca800 Oct 27 16:37:24 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 = Aborting command 0xfffffe0000e547c0 Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e6 5d 08 00 00 28 00=20 Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: Command = timeout Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 = e6 5d 08 00 00 28 00=20 Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status = Error Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check = Condition Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command (per = sense data) Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 14 fb 28 00 00 70 00 length 57344 SMID 292 command timeout cm = 0xfffffe0000e4bf40 ccb 0xfffff8000fd0a000 Oct 27 16:37:25 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 = Aborting command 0xfffffe0000e4bf40 Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 14 fa 48 00 00 e0 00 length 114688 SMID 276 command timeout cm = 0xfffffe0000e4aa40 ccb 0xfffff8007daa0000 Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 14 fa 48 00 00 e0 00 length 114688 SMID 276 terminated ioc 804b scsi 0 = state c xfer 113668 Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 14 fb 28 00 00 70 00=20 Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): CAM status: Command = timeout Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): Retrying command Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 = 14 fb 28 00 00 70 00=20 Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status = Error Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check = Condition Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): Retrying command (per = sense data) Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 = 70 6a 10 00 00 10 00 length 8192 SMID 464 command timeout cm = 0xfffffe0000e5a100 ccb 0xfffff8002620e000 Oct 27 16:38:27 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 = Aborting command 0xfffffe0000e5a100 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 = 70 68 10 00 00 10 00 length 8192 SMID 459 command timeout cm = 0xfffffe0000e59a70 ccb 0xfffff8000fcfa800 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 = 10 10 00 length 8192 SMID 452 command timeout cm 0xfffffe0000e59140 ccb = 0xfffff8007dab0800 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 = 15 0d 88 00 00 70 00 length 57344 SMID 443 command timeout cm = 0xfffffe0000e58570 ccb 0xfffff8000cf25800 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 = 15 0d 40 00 00 28 00 length 20480 SMID 489 command timeout cm = 0xfffffe0000e5c1d0 ccb 0xfffff8007daa4800 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 = 15 0d 40 00 00 28 00 length 20480 SMID 489 terminated ioc 804b scsi 0 = state c xfer 19460 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 = 70 68 10 00 00 10 00 length 8192 SMID 459 terminated ioc 804b scsi 0 = state c xfer (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 = 10 00=20 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): CAM status: Command = timeout Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 = 10 10 00 length 8192 SMID 452 terminated ioc 804b scsi 0 state c xfer 0 Oct 27 16:38:27 elibm kernel: (da6: (da6:mps0:0:17:0): READ(10). = CDB: 28 00 01 15 0d 88 00 00 70 00 length 57344 SMID 443 terminated ioc = 804b scsi 0 state c xfermps0:0: 0 Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 = 70 6a 10 00 00 10 00=20 Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): CAM status: SCSI Status = Error Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI status: Check = Condition Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI sense: UNIT = ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): Retrying command (per = sense data) Oct 27 16:45:21 elibm kernel: mps0: Reinitializing controller, Oct 27 16:45:22 elibm kernel: mps0: Warning: io_cmds_active is out of = sync - resynching to 0 Oct 27 16:45:22 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: = 19.00.00.00-fbsd Oct 27 16:45:22 elibm kernel: mps0: IOCCapabilities: = 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>= Oct 27 16:45:22 elibm kernel: mps0: mps_reinit finished sc = 0xfffffe0000d84000 post 4 free 3 ------------ At 17:13, system rebooted with the freshly downgraded controller, this = time to P19. ------------ Oct 27 17:13:16 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem = 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on = pci17 Oct 27 17:13:16 elibm kernel: mps0: Firmware: 19.00.00.00, Driver: = 19.00.00.00-fbsd Oct 27 17:13:16 elibm kernel: mps0: IOCCapabilities: = 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>= Oct 27 17:13:16 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 Oct 27 17:13:16 elibm kernel: ses1 at mps0 bus 0 scbus0 target 22 lun 0 Oct 27 17:13:16 elibm kernel: da1 at mps0 bus 0 scbus0 target 9 lun 0 Oct 27 17:13:16 elibm kernel: da2 at mps0 bus 0 scbus0 target 10 lun 0 Oct 27 17:13:16 elibm kernel: da0 at mps0 bus 0 scbus0 target 8 lun 0 Oct 27 17:13:16 elibm kernel: da3 at mps0 bus 0 scbus0 target 11 lun 0 Oct 27 17:13:16 elibm kernel: da4 at mps0 bus 0 scbus0 target 12 lun 0 Oct 27 17:13:16 elibm kernel: da5 at mps0 bus 0 scbus0 target 13 lun 0 Oct 27 17:13:16 elibm kernel: da6 at mps0 bus 0 scbus0 target 14 lun 0 Oct 27 17:13:16 elibm kernel: da10 at mps0 bus 0 scbus0 target 19 lun 0 Oct 27 17:13:16 elibm kernel: da7 at mps0 bus 0 scbus0 target 16 lun 0 Oct 27 17:13:16 elibm kernel: da9 at mps0 bus 0 scbus0 target 18 lun 0 Oct 27 17:13:16 elibm kernel: da8 at mps0 bus 0 scbus0 target 17 lun 0 Oct 27 17:13:16 elibm kernel: da11 at mps0 bus 0 scbus0 target 20 lun 0 Oct 27 17:13:16 elibm kernel: da12 at mps0 bus 0 scbus0 target 21 lun 0 sas2ircu output showing the SAS devices, which are mostly SATA disks. = The setup is satisfactorily functional with the P19 firmware. root@elibm:~ # sas2ircu 0 display LSI Corporation SAS2 IR Configuration Utility. Version 18.00.00.00 (2013.11.18)=20 Copyright (c) 2009-2013 LSI Corporation. All rights reserved.=20 Read configuration has been initiated for controller 0 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS2008 BIOS version : 7.37.00.00 Firmware version : 19.00.00.00 Channel description : 1 Serial Attached SCSI Initiator ID : 0 Maximum physical devices : 255 Concurrent commands supported : 3432 Slot : Unknown Segment : 0 Bus : 17 Device : 0 Function : 0 RAID Support : No ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #0 Device is a Hard disk Enclosure # : 2 Slot # : 16 SAS Address : 5000c50-0-05b5-ce25 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02W5L GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 2 Slot # : 17 SAS Address : 5005076-0-3e8e-81a2 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08549F GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 18 SAS Address : 5005076-0-3e8e-81a3 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08548T GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 19 SAS Address : 5005076-0-3e8e-81a4 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08568E GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 20 SAS Address : 5005076-0-3e8e-81a5 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08547X GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 21 SAS Address : 5005076-0-3e8e-81a6 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08518Y GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 2 Slot # : 22 SAS Address : 5005076-0-3e8e-81a7 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08556K GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Enclosure services device Enclosure # : 2 Slot # : 255 SAS Address : 5005076-0-3e8e-81b9 State : Standby (SBY) Manufacturer : IBM-ESXS Model Number : SAS EXP BP =20 Firmware Revision : 61A6 Serial No : 00000006 GUID : N/A Protocol : SAS Device Type : Enclosure services device Device is a Hard disk Enclosure # : 3 Slot # : 0 SAS Address : 5005076-0-3e8e-86e9 State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08550R GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 1 SAS Address : 5005076-0-3e8e-86ea State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08911Y GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 2 SAS Address : 5005076-0-3e8e-86eb State : Ready (RDY) Size (in MB)/(in sectors) : 953869/1953525167 Manufacturer : ATA =20 Model Number : Samsung SSD 840=20 Firmware Revision : BB0Q Serial No : S1D9NEADA08811L GUID : N/A Protocol : SATA Drive Type : SATA_SSD Device is a Hard disk Enclosure # : 3 Slot # : 13 SAS Address : 5000c50-0-05b5-e531 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02STR GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 3 Slot # : 14 SAS Address : 5000c50-0-05b5-d489 State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD02TV1 GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 3 Slot # : 15 SAS Address : 5000c50-0-05b5-f0ad State : Ready (RDY) Size (in MB)/(in sectors) : 140014/286749479 Manufacturer : SEAGATE=20 Model Number : ST9146803SS =20 Firmware Revision : FS03 Serial No : 3SD03F4C GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Enclosure services device Enclosure # : 3 Slot # : 255 SAS Address : 5005076-0-3e8e-86f9 State : Standby (SBY) Manufacturer : IBM-ESXS Model Number : SAS EXP BP =20 Firmware Revision : 61A6 Serial No : 00000006 GUID : N/A Protocol : SAS Device Type : Enclosure services device ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 500605b0:07ba2100 Numslots : 8 StartSlot : 0 Enclosure# : 2 Logical ID : 50050760:3e8e81a0 Numslots : 25 StartSlot : 0 Enclosure# : 3 Logical ID : 50050760:3e8e86e0 Numslots : 25 StartSlot : 0 ------------------------------------------------------------------------ SAS2IRCU: Command DISPLAY Completed Successfully. SAS2IRCU: Utility Completed Successfully. root@elibm:~ #=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DD2BE91C-ADB0-4D75-950D-654A388208AE>