Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 2 May 2013 16:10:47 -0600
From:      Steven <steven_schneider@incentre.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: Linksys WPC54g NDIS compiles but doesn't work?
Message-ID:  <20130502221047.GD21736@gemini.wss-ds.org>
In-Reply-To: <5182A6F3.8080708@onetel.com>
References:  <20130502150200.GC21736@gemini.wss-ds.org> <5182A6F3.8080708@onetel.com>

next in thread | previous in thread | raw e-mail | index | archive | help
* Chris Whitehouse <cwhiteh@onetel.com> [130502 12:00]:
>Date: Thu, 02 May 2013 18:48:35 +0100
>From: Chris Whitehouse <cwhiteh@onetel.com>
>To: freebsd-questions@freebsd.org
>Subject: Re: Linksys WPC54g NDIS compiles but doesn't work?
>User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:9.0) Gecko/20111228
> Thunderbird/9.0
>Content-Type: text/plain; charset="us-ascii"; Format="flowed"
>Sender: owner-freebsd-questions@freebsd.org
>
>On 02/05/2013 16:02, Steven wrote:
>>Hello,
>>
>>I posted this once already, but I wasn't subscribed at the time and
>>I don't think it got posted to the list. Hopefully this isn't a
>>dupe.
>>
>>I've installed FreeBSD 9.1 RELEASE on a family member's laptop, a
>>Toshiba Satellite 5100. Said member was using a Linksys WPC54g v.4
>>pcicard for wireless. I downloaded the v.4 drivers for the card
>>from the Cisco website and was able to use ndisgen to build a
>>wrapper for the driver.
>
>Hi,
>
>I have a PCMCIA WPC54g V5 which works with malo(4). It might work 
>with your V4. You need to download some firmware - see the man page.
>
>Chris
>
Thanks, I doubted your suggestion would work seeing that malo(4) is
about running cards with the Marvell Libertas chipsets and my card 
has the chipset below.

>>none3@pci0:5:0:0: class=0x020000 card=0x00291737 chip=0x222017fe
>>rev=0x00 hdr=0x00
>>vendor = 'InProComm Inc.'
>>device = 'IPN 2220 802.11g'
>>class = network
>>subclass = ethernet
>>
I gave it a shot anyhow, but unfortunately it doesn't work.  Thanks
anyhow, and I'm still open to other suggestions.

-- 
W. Steven Schneider  <steven_schneider@incentre.net>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130502221047.GD21736>