Date: Wed, 19 Nov 1997 19:38:20 +0100 (CET) From: Are Bryne <are@communique.no> To: FreeBSD hackers list <freebsd-hackers@freebsd.org> Cc: Are Bryne <are@communique.no> Subject: NOT READY asc:4,1 error messages... (fwd) Message-ID: <Pine.BSF.3.96.971119193421.23700A-100000@rune.communique.no>
next in thread | raw e-mail | index | archive | help
I tried sending this to questions first, but no reply was forthcoming. [please keep me cc'd] ----------- forwarded message below Hi, I got this after a mysterious machine hang: (using verbose boot) WARNING: / was not properly dismounted. swapon: adding /dev/sd0s1b as swap device Automatic reboot in progress... /dev/rsd0a: CLEAN FLAG NOT SET IN SUPERBLOCK (FIXED) /dev/rsd0a: 859 files, 12393 used, 19382 free (158 frags, 2403 blocks, 0.5% fragmentation) /dev/rsd0s1f: CLEAN FLAG NOT SET IN SUPERBLOCK (FIXED) /dev/rsd0s1f: 47652 files, 413623 used, 180152 free (6048 frags, 21763 blocks, 1.0% fragmentation) /dev/rsd0s1e: UNREF FILE I=72 OWNER=root MODE=100644 /dev/rsd0s1e: SIZE=0 MTIME=Oct 23 23:01 1997 (CLEARED) /dev/rsd0s1e: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED) /dev/rsd0s1e: BLK(S) MISSING IN BIT MAPS (SALVAGED) /dev/rsd0s1e: SUMMARY INFORMATION BAD (SALVAGED) /dev/rsd0s1e: CLEAN FLAG NOT SET IN SUPERBLOCK (FIXED) /dev/rsd0s1e: 596 files, 2864 used, 26863 free (175 frags, 3336 blocks, 0.6% fragmentation) sd0(ahc0:0:0): NOT READY asc:4,1 sd0(ahc0:0:0): Logical unit is in process of becoming ready, retries:4 sd0(ahc0:0:0): SCB 0x1 - timed out in message in phase, SCSISIGI == 0xe6 SEQADDR = 0x177 SCSISEQ = 0x12 SSTAT0 = 0x7 SSTAT1 = 0x3 Ordered Tag queued sd0(ahc0:0:0): NOT READY asc:4,1 sd0(ahc0:0:0): Logical unit is in process of becoming ready, retries:4 Ordered Tag sent sd0(ahc0:0:0): SCB 0x0 timedout while recovery in progress sd0(ahc0:0:0): NOT READY asc:4,1 sd0(ahc0:0:0): Logical unit is in process of becoming ready, retries:4 sd0(ahc0:0:0): SCB 0x1 - timed out in message in phase, SCSISIGI == 0xe6 SEQADDR = 0x15b SCSISEQ = 0x12 SSTAT0 = 0x6 SSTAT1 = 0x3 sd0(ahc0:0:0): abort message in message buffer ahc0:A:0: Missed busfree. sd0(ahc0:0:0): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0xb6 SEQADDR = 0x6 SCSISEQ = 0x5a SSTAT0 = 0x7 SSTAT1 = 0x13 ahc0: Issued Channel A Bus Reset. 4 SCBs aborted Clearing bus reset Clearing 'in-reset' flag sd0(ahc0:0:0): no longer in timeout sd0(ahc0:0:0): no longer in timeout ahc0: target 0 synchronous at 5.0MHz, offset = 0xc sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 sd0(ahc0:0:0): Power on, reset, or bus device reset occurred, retries:2 Doing initial network setup: hostname. [normal from here on ...] Any ideas as to what this is? Flaky scsi-disk? Something else? Thanks in advance. (I am cc'ed as freebsd-questions takes up too much space and bandwith, IMO :) Are Bryne
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971119193421.23700A-100000>