Date: Sat, 23 Jun 2007 15:37:04 +0200 From: Fredrik Lindberg <fli+freebsd-hackers@shapeshifter.se> To: Patrick Tracanelli <eksffa@freebsdbrasil.com.br> Cc: hackers@freebsd.org Subject: Re: UPEK/TouchChip Biometric Device problem Message-ID: <467D2200.4020507@shapeshifter.se> In-Reply-To: <467D1553.7060808@freebsdbrasil.com.br> References: <467C343C.60707@freebsdbrasil.com.br> <467C3D4F.5030106@shapeshifter.se> <467CA46E.6070705@freebsdbrasil.com.br> <467CFA51.40101@shapeshifter.se> <467D1553.7060808@freebsdbrasil.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
Patrick Tracanelli wrote:
> Fredrik Lindberg wrote:
>> This is _exactly_ the same device as you have been using in the past
>> with libtfmessbsp.so ?
>
> No, not the same hardware, but same model/chipset.
>
>> Because if you try to use it with an unsupported device you'll get
>> the "unable to attach" message.
>
> Its a 0x2016 device from 0x0483 vendor. This is the only thing that is
> "the same" as the previously used device.
>
>>
>> Since the binary is built on top of libusb you can turn on debugging
>> in libusb by setting the environment variable USB_DEBUG (the larger
>> value the more verbose debugging).
>
> Goood hint,thank you.
>
> Here is what I get:
>
> # bbdm -b "{5550454b-2054-464d-2f45-535320425350}" -m filedb -c eksffa ;
> echo $?
> usb_set_debug: Setting debugging level to 3 (on)
> usb_os_find_busses: Found /dev/usb0
> usb_os_find_busses: Found /dev/usb1
> usb_os_find_busses: Found /dev/usb2
> usb_os_find_busses: Found /dev/usb3
> usb_os_find_busses: Found /dev/usb4
> usb_os_find_devices: Found /dev/ugen1 on /dev/usb2
Ok, then at least it's talking to the device. I had a user who had about
the same problem as you, it turned out that the particular device he
was using wasn't supported by the driver, when he tried another device
everything worked as expected. I can't seem to find his usb vendor,
device pair though.
If I remember correctly, libtfmessbsp.so only supports TCD41 swipe
readers.
Fredrik
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?467D2200.4020507>