Date: Mon, 20 Sep 1999 09:56:17 -0400 From: Rick Knebel <rknebel@uplink.net> To: questions@freebsd.org Subject: Network Card Message-ID: <19990920095617.A301@rknebel.uplink.net>
next in thread | raw e-mail | index | archive | help
Hi,
i am trying to do IP aliasing with user ppp.
I think my problen is a irq conflict between my ethernet card and my scsi
card.
I will include my dmesg and a number of relevant files if someone would be
so kind to look then over and see if that is the problem.
Dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #4: Sun Sep 19 20:32:24 EDT 1999
root@rknebel.uplink.net:/usr/src/sys/compile/RICK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping=2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,<b24>,<b25>>
real memory = 268435456 (262144K bytes)
avail memory = 257806336 (251764K bytes)
Preloaded elf kernel "kernel" at 0xc0356000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 9 on
pci0.9.0
fxp0: Ethernet address 00:a0:c9:f2:32:3b
ncr0: <ncr 53c895 fast40 wide scsi> rev 0x01 int a irq 9 on pci0.10.0
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x11 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x1b940231 Comp ID: PNPb02f
[0x2fb0
d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 4 on isa
sio2: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <TOSHIBA DVD-ROM SD-M1202/1020>, removable, accel,
dma, io
rdis
acd0: drive speed 5512KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <Seagate STT20000A/8.39>, removable, accel, dma,
iordis
wdc1: ATAPI streaming tapes not configured
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt_isa_probe: Probe failled for card at 0x330
bt_isa_probe: Probe failled for card at 0x334
bt_isa_probe: Probe failled for card at 0x230
bt_isa_probe: Probe failled for card at 0x234
bt_isa_probe: Probe failled for card at 0x130
bt_isa_probe: Probe failled for card at 0x134
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to da1s1a
cd0 at ncr0 bus 0 target 6 lun 0
cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 31)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray c
losed
da2 at ncr0 bus 0 target 2 lun 0
da2: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da0 at ncr0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
pid 231 (Xaccel): trap 12 with interrupts disabled
if config -a
fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:a0:c9:f2:32:3b
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 209.173.88.243 --> 209.173.88.252 netmask 0xffffff00
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
rc.conf
moused_type="NO"
moused_enable="NO"
ifconfig_fxp0="inet 192.168.1.1 netmask 255.255.255.0"
ifconfig_lo0="inet 127.0.0.1"
network_interface="lo0 fxp0"
gateway_enable="YES"
nfs_server_enable="YES"
nfs_client_enable="YES"
hostname="rknebel.uplink.net"
lpd_enable="YES"
host
127.0.0.1 localhost localhost.my.domain myname.my.domain
209.173.88.243 rknebel rknebel.uplink.net
192.168.1.1 free free.uplink.net
192.168.1.2 mac mac.uplink.net
192.168.1.3 win win.uplink.net
My network card is an Intel EtherExpress
My scsi card is a Symbios
They both want to use irq 9 it seems
Thanks
Rick
--
Rick Knebel
rknebel@uplink.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990920095617.A301>