Date: Tue, 27 Apr 1999 14:17:02 +0300 From: Vallo Kallaste <vallo@matti.ee> To: freebsd-current@freebsd.org Subject: Sound doesn't work after recent upgrade Message-ID: <19990427141702.A3995@myhakas.matti.ee>
next in thread | raw e-mail | index | archive | help
Hello !
Something changed between Apr.21 and Apr.27 so that my onboard
Vibra16X get probed but I doesn't get sound. No error messages,
nothing, different players show that all is okay and play
"silently". Catting something to /dev/audio or /dev/dsp(W) causes
noise for about 1 second then silence. My soundcard worked well
after initial new-bus changes. The motherboard is Tyan Thunder 100
DLUAN with onboard sound. Sound is not essential but it's annoying.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Apr 27 13:15:18 EEST 1999
root@myhakas.matti.ee:/usr/src/sys/compile/Myhakas_SMP
Timecounter "i8254" frequency 1193061 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
config> q
avail memory = 127279104 (124296K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc031d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031d09c.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Probing for PnP devices:
CSN 1 Vendor ID: CTL00f0 [0xf0008c0e] Serial 0xffffffff Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <Vibra16X> sn 0xffffffff) at 0x220-0x22f irq 5 drq 1 flags 0x13 on isa
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82443GX host to PCI bridge> at device 0.0 on pci0
chip1: <Intel 82443GX host to AGP bridge> at device 1.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> at device 7.2 on pci0
uhci0: could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
pcib1: <PCI to PCI bridge (vendor=1011 device=0024)> at device 16.0 on pci0
pci2: <PCI bus> on pcib1
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 17.0 on pci0
fxp0: interrupting at irq 19
fxp0: Ethernet address 00:e0:81:10:18:e0
ahc0: <Adaptec aic7895 Ultra SCSI adapter> at device 18.0 on pci0
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: interrupting at irq 16
ahc1: <Adaptec aic7895 Ultra SCSI adapter> at device 18.1 on pci0
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
ahc1: interrupting at irq 16
ncr0: <ncr 53c875 fast20 wide scsi> at device 19.0 on pci0
ncr0: interrupting at irq 16
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> at device 20.0 on pci0
fxp1: interrupting at irq 17
fxp1: Ethernet address 00:90:27:45:26:03
isa0: <ISA bus> on motherboard
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd0: interrupting at irq 1
psm0: <PS/2 Mouse> on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <8 virtual consoles, flags=0x0>
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
BRIDGE 981214, have 3 interfaces
-- index 1 fxp0 type 6 phy 0 addrl 6 addr 00.e0.81.10.18.e0
-- index 2 fxp1 type 6 phy 0 addrl 6 addr 00.90.27.45.26.03
SMP: AP CPU #1 Launched!
ata0: master: settting up UDMA2 mode on PIIX4 chip OK
ad0: <QUANTUM FIREBALL EL2.5A/A08.1100> ATA-4 disk at ata0 as master
ad0: 2445MB (5008500 sectors), 5300 cyls, 15 heads, 63 S/T, 512 B/S
ad0: piomode=4, dmamode=2, udmamode=2
ad0: 16 secs/int, 0 depth queue, DMA mode
Waiting 4 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ahc0 bus 0 target 6 lun 0
da0: <QUANTUM VIKING II 4.5WSE 5520> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da1 at ahc1 bus 0 target 6 lun 0
da1: <QUANTUM VIKING II 4.5WSE 5520> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
cd0 at ncr0 bus 0 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1030> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
--
Vallo Kallaste
vallo@matti.ee
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990427141702.A3995>