Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 Jul 2007 21:37:56 +0300
From:      "[CPS] AkirA" <rudinskij@dv-com.net>
To:        <yongari@freebsd.org>, <stable@freebsd.org>
Subject:   nfe trouble
Message-ID:  <487D1F4CFF854EC485B96B8A7AC0B31C@nintendo>

next in thread | raw e-mail | index | archive | help
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Mon Jul 16 01:01:03 EEST 2007
    akira@CPS:/usr/obj/usr/src/sys/CPS
ACPI APIC Table: <Nvidia ASUSACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2109.74-MHz K8-class 
CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb1  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,<b8>>
  Cores per package: 2
real memory  = 3220045824 (3070 MB)
avail memory = 3107737600 (2963 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 
0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 
0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 
0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f mem 
0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem 
0xfdeff000-0xfdeff0ff irq 16 at device 6.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:30:4f:27:9e:5f
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0x9800-0x98ff mem 
0xfdefe000-0xfdefe0ff irq 17 at device 7.0 on pci1
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:95:cb:da:9e
rl1: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 
0xfdefd000-0xfdefd0ff irq 18 at device 8.0 on pci1
miibus2: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus2
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:11:3b:04:d6:c6
pci1: <serial bus, FireWire> at device 11.0 (no driver attached)
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at 
device 8.0 on pci0
miibus3: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus3
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, 
auto
nfe0: Ethernet address: 00:1b:fc:5b:5e:1c
nfe0: [FAST]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at 
device 9.0 on pci0
miibus4: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus4
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, 
auto
nfe1: Ethernet address: 00:1b:fc:59:d3:eb
nfe1: [FAST]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounters tick every 1.000 msec
IP Filter: v4.1.13 initialized.  Default = pass all, Logging = disabled
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to 
accept, logging limited to 5 packets/entry by default
ad4: 76319MB <WDC WD800JD-60LSA5 10.01E03> at ata2-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
rl0: link state changed to UP
rl1: link state changed to UP




after theat


nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at 
device 8.0 on pci0
nfe0: could not allocate DMA'able memory for jumbo pool
device_attach: nfe0 attach returned 12
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at 
device 9.0 on pci0
nfe1: could not allocate DMA'able memory for jumbo pool
device_attach: nfe1 attach returned 12


and not start to work network

nfe0@pci0:8:0:  class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2 
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = bridge
nfe1@pci0:9:0:  class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2 
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = bridge


what i must do, to solute this?

FreeBSD CPS 6.2-STABLE FreeBSD 6.2-STABLE #0: Mon Jul 16 01:01:03 EEST 2007 
akira@CPS:/usr/obj/usr/src/sys/CPS  amd64




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?487D1F4CFF854EC485B96B8A7AC0B31C>