Date: Tue, 26 Nov 2013 16:00:46 GMT From: Benjamin Stier <benjamin.stier@ub.uni-tuebingen.de> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/184311: kernel panic with bge(4) on SunFire X2100 Message-ID: <201311261600.rAQG0kiO049978@oldred.freebsd.org> Resent-Message-ID: <201311261610.rAQGA0Fb094666@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 184311 >Category: amd64 >Synopsis: kernel panic with bge(4) on SunFire X2100 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Nov 26 16:10:00 UTC 2013 >Closed-Date: >Last-Modified: >Originator: Benjamin Stier >Release: 9.2-RELEASE-p1 >Organization: UB Tuebingen >Environment: FreeBSD 9.2-RELEASE-p1 FreeBSD 9.2-RELEASE-p1 #0: Mon Nov 25 12:19:51 CET 2013 root@***:/usr/obj/usr/src/sys/UBT amd64 >Description: I'm tried updating a SunFire X2100 from 9.1-RELEASE to 9.2-RELEASE-p1 on a SunFire X2100. The machine was running without problems on 9.1-RELEASE. After updating, the system won't boot and panics with the following message: --- SNIP --- bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xfdaf0000-0xfdafffff irq 19 at device 0.0 on pci4 bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E miibus1: <MII bus> on bge0 brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1 brgphy0: no media present ifmedia_set: no match for 0x0/0xfffffff panic: ifmedia_set cpuid = 0 KDB: stack backtrace: #0 0xffffffff80834966 at kdb_backtrace+0x66 #1 0xffffffff807fcb5e at panic+0x1ce #2 0xffffffff808be5a3 at ifmedia_set+0x53 #3 0xffffffff8051e58d at brgphy_attach+0x18d #4 0xffffffff8082d70c at device_attach+0xcc #5 0xffffffff8082ec8a at bus_generic_attach+0x1a #6 0xffffffff80525b88 at miibus_attach+0xe8 #7 0xffffffff8082d70c at device_attach+0xcc #8 0xffffffff8082ec8a at bus_generic_attach+0x1a #9 0xffffffff8052625f at mii_attach+0x52f #10 0xffffffff803e03f1 at bge_attach+0x3cf1 #11 0xffffffff8082d70c at device_attach+0xcc #12 0xffffffff8082ec8a at bus_generic_attach+0x1a #13 0xffffffff803320a4 at acpi_pci_attach+0x164 #14 0xffffffff8082d70c at device_attach+0xcc #15 0xffffffff8082ec8a at bus_generic_attach+0x1a #16 0xffffffff80333eda at acpi_pcib_attach+0x19a #17 0xffffffff803350db at acpi_pcib_pci_attach+0x9b --- SNIP --- I can provide further information if needed. >How-To-Repeat: >Fix: Disabling "hw.bge.allow_asf" on the loader prompt makes the machine boot. However it was working fine without this setting before, so this is not a real fix. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201311261600.rAQG0kiO049978>