Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 2 Jan 2004 15:58:42 -0800
From:      Russell Jackson <rjackson@cserv62.csub.edu>
To:        Arne Schwabe <arne@rfc2549.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Synaptics Touchpad xfree driver hack :)
Message-ID:  <20040102235842.GA70893@cserv62.csub.edu>
In-Reply-To: <86n097dco9.fsf@kamino.rfc1149.org>
References:  <86n097dco9.fsf@kamino.rfc1149.org>

next in thread | previous in thread | raw e-mail | index | archive | help

--kXdP64Ggrk/fb43R
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Patches apply and compile cleanly, however the psm hack doesn't work on my laptop.

On Thu, 01 Jan 2004, Arne Schwabe wrote:

> Hi,
> 
> I changed from debian gnu/linux to freebsd 3 weeks ago. Almost
> everything with my Notebook worked fine but the Touchpad was not as
> good as in linux or windows. Since I really wanted to have my middle
> button of the trackpoint and the scrolling of the touchpad working I
> decided to try to port the XFree86 synaptics Driver for Linux.
> (A nice thing is that Synaptics has a full spec to the protocol used
> available online)
> 
> Since I am a real C Newbie. (This is more or less my first time
> writing C), not everything is really clean, to be honest it is more a
> collection of hack I am afraid and this approch somewhat against the
> idea of sysmouse. :/ But it still works for me [tm] ;)
> 
> The synaptics XFree86 driver *should* detect all features and use them
> like on linux. But for now initialisation of an attached second mouse
> is not done (I was too lazy to do it, and for me it works without it)
> 
> I hope someone with more C skills then I can clean this mess a little
> up/advise me how to clean it up and I hope I have picked the right
> mailing list :)
> 
> But I you want to try it:
> 
> download my patches from plaisthos.de/synaptics:
> 
> wget http://www.plaisthos.de/synaptics/synaptics-driver.diff
> wget http://www.plaisthos.de/synaptics/synaptics.kern.diff
> 
> Apply the 2. Patch to your kernel source (My sources should be
> -current :))
> 
> (cd /usr/src/sys/; patch -p1 <
> /location/of/the/patch/synaptics.kern.diff)
> 
> Rebuild your kernel and reboot. Check if my code recognized your
> Touchpad:
> 
> Jan  1 12:41:29 kamino kernel: psm0: model Synaptics Touchpad, device ID 0-00, 2 buttons
> 
> 
> Copy /usr/src/sys/sys/mouse.h to /usr/include/sys, or do a make world
> (cp /usr/src/sys/sys/mouse.h /usr/include/sys)
> 
> Download the Xfree Synaptics Driver Sources from
> http://w1.894.telia.com/~u89404340/touchpad/
> 
> wget http://w1.894.telia.com/~u89404340/touchpad/files/synaptics-0.12.2.tar.bz2
> 
> 
> Unpack it and apply the patch:
> 
> tar xfvj synaptics synaptics-0.12.2.tar.bz2
> cd synaptics
> patch -p1 < synaptics-driver.diff
> 
> To build it use gmake:
> 
> gmake synaptics_drv.o
> 
> (a plain gmake won't work, since the tools don't build at the Moment
> but they not so important)
> 
> copy the driver to your XFree Installation:
> 
> cp synaptics_drv.o /usr/X11R6/lib/modules/input
> 
> Disable moused, in case it is running:
> 
> killall moused
> 
> Edit your XF86Config:
> 
> In ServerLayout you should change your Corepointer line to:
>         InputDevice    "synaptics" "CorePointer"
> 
> And now add this: 
> 
> Section "InputDevice"
>   Driver        "synaptics"
>   Identifier    "synaptics"
>   Option        "Device"        "/dev/bpsm0"
>   Option        "Protocol"      "psaux"
>   Option        "LeftEdge"      "1900"
>   Option        "RightEdge"     "5400"
>   Option        "TopEdge"       "1900"
>   Option        "BottomEdge"    "4000"
>   Option        "FingerLow"     "25"
>   Option        "FingerHigh"    "30"
>   Option        "MaxTapTime"    "180"
>   Option        "MaxTapMove"    "220"
>   Option        "VertScrollDelta" "100"
>   Option        "MinSpeed"      "0.02"
>   Option        "MaxSpeed"      "0.18"
>   Option        "AccelFactor" "0.0010"
>   Option        "SHMConfig"     "on"
> #  Option       "Repeater"      "/dev/ps2mouse"
> EndSection
> 
> Pray and start X :)
> 
> If something goes wrong, let me now.
> I hope someone else besides me has some use of my hacking.
> 
> Arne
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
--
Russell A. Jackson (rjackson@cserv62.csub.edu)


--kXdP64Ggrk/fb43R
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"

psm: ENABLE_DEV return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 20 03 64
psm: DISABLE_DEV return code:00fa
psm: SEND_AUX_DEV_STATUS return code:00fa
psm: status 00 03 64

--kXdP64Ggrk/fb43R
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #4: Fri Jan  2 15:10:09 PST 2004
    rjackson@localhost:/usr/obj/usr/src/sys/VALA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07d1000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07d1228.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07d12d4.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc07d1380.
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc07d1430.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07d1478.
Calibrating clock(s) ... i8254 clock: 1193168 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1192625736 Hz
CPU: Mobile AMD Athlon(tm) XP 1400+ (1192.63-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 251658240 (240 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000ea97fff, 237445120 bytes (57970 pages)
0x000000000ef00000 - 0x000000000eff7fff, 1015808 bytes (248 pages)
avail memory = 240680960 (229 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6ff0
bios32: Entry = 0xfd760 (c00fd760)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd760+0x11e
pnpbios: Found PnP BIOS data at 0xc00f7050
pnpbios: Entry = f0000:9c77  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 
00 01 ff 00 00 01 0a 01 00 01 20 01 00 01 25 01 
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 
VESA: 55 mode(s) found
VESA: v2.0, 16320k memory, flags:0x1, mode table:0xc0755b42 (1000022)
VESA: ATI CABO 
VESA: ATI Technologies Inc. U1   01.00
random: <entropy source>
ACPI: DSDT was overridden.
    ACPI-0374: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80012814
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=cab01002)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x59  11
embedded    0   15    A   0x4a  11
embedded    0    8    A   0x4b  5
embedded    0   10    A   0x48  10 11
embedded    0   11    A   0x49  10 11
embedded    0   19    A   0x49  10 11
embedded    0   12    A   0x49  10 11
embedded    0   12    B   0x49  10 11
slot 13     1    5    A   0x49  10 11
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
ACPI timer looks GOOD min = 2, max = 2, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK8 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.2.0
\\_SB_.PCI0.ISA_.LNK4 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNK7 irq   5: [  3  4  5  6  7 10 11 12] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK1 irq   0: [  3  4  5  6  7 10 11 12] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK3 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 0.19.0
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK3 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.12.1
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK1:
	interrupts:	     3     4     5     6     7    10    11    12
	penalty:	  1110  1110   210  1110  1110   310   510  1110
	references:	1
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK1:
	interrupts:	     3     4     5     6     7    10    11    12
	penalty:	  1110  1110   210  1110  1110   310   510  1110
	references:	1
	priority:	822
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK8 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.2.0
\\_SB_.PCI0.ISA_.LNK4 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNK7 irq   5: [  3  4  5  6  7 10 11 12] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK1 irq   5: [  3  4  5  6  7 10 11 12] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK3 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 0.19.0
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK3 irq  11: [  3  4  5  6  7 10 11 12] low,level,sharable 0.12.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
	map[14]: type 3, range 32, base f4400000, size 12, enabled
	map[18]: type 4, range 32, base 00008090, size  2, port disabled
found->	vendor=0x1002, dev=0xcab0, revid=0x13
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x700f, revid=0x01
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f4014000, size 12, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.ISA_.LNK8)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x1533, revid=0x00
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00008400, size  8, enabled
	map[14]: type 1, range 32, base f4015000, size 12, enabled
pcib0: matched entry for 0.8.INTA (source \\_SB_.PCI0.ISA_.LNK7)
pcib0: slot 8 INTA is routed to irq 5
found->	vendor=0x10b9, dev=0x5451, revid=0x02
	bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0xc290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ffbfe000, size 12, enabled
found->	vendor=0x104c, dev=0xac50, revid=0x02
	bus=0, slot=10, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=255
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00008800, size  8, enabled
	map[14]: type 1, range 32, base f4017800, size  8, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNK3)
pcib0: slot 11 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x20
	bus=0, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base f4000000, size 16, enabled
	map[14]: type 4, range 32, base 00008098, size  3, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 12 INTA is routed to irq 10
found->	vendor=0x14f1, dev=0x2f00, revid=0x01
	bus=0, slot=12, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base f4016000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.PCI0.ISA_.LNK4)
pcib0: slot 15 INTA is routed to irq 11
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=15, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00008080, size  4, enabled
found->	vendor=0x10b9, dev=0x5229, revid=0xc4
	bus=0, slot=16, func=0
	class=01-01-fa, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x7101, revid=0x00
	bus=0, slot=17, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f4017000, size 11, enabled
	map[14]: type 1, range 32, base f4010000, size 14, enabled
pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 19 INTA is routed to irq 10
found->	vendor=0x104c, dev=0x8023, revid=0x00
	bus=0, slot=19, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xf4100000-0xf41fffff
pcib1:   prefetched decode 0xf6000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 1.5.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK2 irq  10: [  3  4  5  6  7 10 11 12] low,level,sharable 1.5.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base f6000000, size 25, enabled
	map[14]: type 4, range 32, base 00009000, size  8, enabled
	map[18]: type 1, range 32, base f4100000, size 16, enabled
pcib1: matched entry for 1.5.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib1: slot 5 INTA is routed to irq 10
found->	vendor=0x1002, dev=0x4336, revid=0x00
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf4014000-0xf4014fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xf4015000-0xf4015fff irq 5 at device 8.0 on pci0
pcm0: <Analog Devices AD1886A AC97 Codec (id = 0x41445363)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: Primary codec extended features variable rate PCM, reserved 1
pcm0: sndbuf_setmap 21c000, 1000; 0xc2648000 -> 21c000
pcm0: sndbuf_setmap e9da000, 1000; 0xc2646000 -> e9da000
pcm0: sndbuf_setmap 25e000, 1000; 0xc264a000 -> 25e000
pcm0: sndbuf_setmap e978000, 1000; 0xc2664000 -> e978000
pcm0: sndbuf_setmap 276000, 1000; 0xc2662000 -> 276000
cbb0: <TI1410 PCI-CardBus Bridge> mem 0xffbfe000-0xffbfefff at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK1)
pcib0: slot 10 INTA is routed to irq 5
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac50104c 0x02100007 0x06070002 0x00022000 
  0x10: 0xffbfe000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07400105 
  0x40: 0x00b00e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x40649061 0x00000000 0x00000000 0x01001002 
  0x90: 0x616482c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe110001 0x00c00100 0x00000000 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
re0: <RealTek 8139C+ 10/100BaseTX> port 0x8800-0x88ff mem 0xf4017800-0xf40178ff irq 11 at device 11.0 on pci0
re0: Ethernet address: 00:08:02:d0:21:4e
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: bpf attached
pci0: <simple comms> at device 12.0 (no driver attached)
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf4016000-0xf4016fff irq 11 at device 15.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f at device 16.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
pci0: <serial bus, FireWire> at device 19.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0067
psm0: found Synaptics Touchpad
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Synaptics Touchpad, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x9 0x1 0x1
sio0 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 
9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 
9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1192625736 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 3 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: Notify 0x0
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA100 on AcerLabs Aladdin chip
GEOM: create disk ad0 dp=0xc2690860
ad0: <FUJITSU MHR2030AT/53BB> ATA-6 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <Compaq DVD-ROM GDR-8081N/0009> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:29302497
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:29302560 l:29302560
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 15002878464 end 15002910719
GEOM: Configure ad0s2, start 15002910720 length 15002910720 end 30005821439
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 380936192 end 649371647
GEOM: Configure ad0s2c, start 0 length 15002910720 end 15002910719
GEOM: Configure ad0s2d, start 649371648 length 268435456 end 917807103
GEOM: Configure ad0s2e, start 917807104 length 268435456 end 1186242559
GEOM: Configure ad0s2f, start 1186242560 length 13816668160 end 15002910719
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 68 us
Linux ELF exec handler installed
linprocfs registered

--kXdP64Ggrk/fb43R--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040102235842.GA70893>