Date: Mon, 25 Sep 2000 19:00:12 +0200 (CEST) From: Janko van Roosmalen <janko@compuserve.com> To: igorr@crosswinds.net Cc: FreeBSD questions <freebsd-questions@FreeBSD.ORG> Subject: Re: PicoBSD. Can' build Message-ID: <Pine.BSF.4.10.10009251853090.977-100000@parmenides.utp.net> In-Reply-To: <20000925101555.A14472@linux.rainbow>
next in thread | previous in thread | raw e-mail | index | archive | help
There is a pico-BSD page on www.freebsd.org. Doesn't that mention somebody you can email? Only because you are really desparate: a non-BSD solution is at www.linuxrouter.org. ===Janko van Roosmalen - Vught - Netherlands=== On Mon, 25 Sep 2000, Igor Roboul wrote: > > Hello, > > I again have problems while building custom PicoBSD release :-( > I _need_ picoBSD because I have one reasonable good PC for making it > dialin/dialout server. > It need only PPP suport, and one network card (any). And of course it need > NAT support. > > If someone can direct me to correct place where to ask about picoBSD, or > even offer non-BSD based solution I'll be happy. > > By the way, > I have AMD K6-2/300 (undercloking), 32 Mb of RAM, 1 FDD 1.44Mb, _no HDD_ > and this PC will never have HDD. > > All paths are relative to /usr/src/releases/picobsd , when I don't say > other. > When I'm trying build picoBSD with "build" script in build/ it reports: > > -> Populating MFS tree... > -> Making and installing crunch1... > crunchgen: ./crunch1.conf: more: warning: could not find source directory > crunchgen: ./crunch1.conf: more: warning: could not find any .o files > crunchgen: ./crunch1.conf: more: error: no objpaths specified or calculated > crunchgen: ./crunch1.conf: more: ignoring program because of errors > Run "make -f crunch1.mk objs exe" to build crunched binary. > *** Error code 1 > > then I change to isp/crunch1 and try "make -f crunch1.mk objs exe" > I got "ld" style errors about undefined symbols: > > login.lo: In function `auth_pam': > login.lo(.text+0x111c): undefined reference to `pam_start' > login.lo(.text+0x1135): undefined reference to `pam_strerror' > login.lo(.text+0x1160): undefined reference to `pam_set_item' > login.lo(.text+0x1179): undefined reference to `pam_strerror' > login.lo(.text+0x11ac): undefined reference to `pam_set_item' > login.lo(.text+0x11c5): undefined reference to `pam_strerror' > login.lo(.text+0x11ea): undefined reference to `pam_authenticate' > login.lo(.text+0x1222): undefined reference to `pam_get_item' > login.lo(.text+0x1268): undefined reference to `pam_strerror' > login.lo(.text+0x1294): undefined reference to `pam_strerror' > login.lo(.text+0x12b6): undefined reference to `pam_end' > login.lo(.text+0x12cf): undefined reference to `pam_strerror' > login.lo(.data+0xc0): undefined reference to `misc_conv' > inetd.lo: In function `ipsecsetup': > inetd.lo(.text+0x1cca): undefined reference to `ipsec_set_policy' > inetd.lo(.text+0x1cdf): undefined reference to `ipsec_get_policylen' > inetd.lo(.text+0x1d97): undefined reference to `ipsec_set_policy' > inetd.lo(.text+0x1dac): undefined reference to `ipsec_get_policylen' > inetd.lo: In function `getconfigent': > inetd.lo(.text+0x1eb9): undefined reference to `ipsec_get_policylen' > pppd.lo: In function `MakeKey': > pppd.lo(.text+0x11456): undefined reference to `des_set_odd_parity' > pppd.lo: In function `DesEncrypt': > pppd.lo(.text+0x1161a): undefined reference to `des_set_key' > pppd.lo(.text+0x1162a): undefined reference to `des_ecb_encrypt' > telnet.lo: In function `tn': > telnet.lo(.text+0x23fd): undefined reference to `ipsec_set_policy' > telnet.lo(.text+0x240e): undefined reference to `ipsec_strerror' > > etc. > > I know this is normal because strippeddown version of BSD does > not need PAM for example :-) > But how can I tell login.c to don't use PAM? > I have looked to /etc/defaults/make.conf and didn't found something > like PAM_ENABLE=true > > So, what I can do with this. All advices acceptable (except advices about > bying HDD :-)) ) > > -- > Igor Roboul, Unix System Administrator & Programmer @ sanatorium "Raduga", > Sochi, Russia > http://www.brainbench.com/transcript.jsp?pid=304744 > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10009251853090.977-100000>