Date: Thu, 03 Jan 2013 13:52:05 +0000 From: Hugo Silva <hugo@barafranca.com> To: Joseph Olatt <joji@eskimo.com> Cc: freebsd-questions@freebsd.org Subject: Re: audio/baresip on FreeBSD 9 Message-ID: <50E58D05.2090408@barafranca.com> In-Reply-To: <20130103041911.GA29654@shellx.eskimo.com> References: <20130103041911.GA29654@shellx.eskimo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 01/03/13 04:19, Joseph Olatt wrote:
>
> I've been trying to get baresip to work on my FreeBSD 9.x laptop and
> haven't had much success. I register successfully to callcentric.com and
> it appears that I can connect and there is a stream of data coming
> through based on the status display:
>
> [0:00:08] audio=0/0 (bit/s) [ ]
>
> However, there is no sound.
>
> Is anybody on the list successfully using baresip? If so, could they
> please provide some pointers on how to get sound?
>
> There doesn't seem to be much documentation anywhere on the Internet for
> baresip.
>
> My config file (~/.baresip/config) is:
>
> /* Begin ~/.baresip/config */
> #
> # baresip configuration
> #
>
> #------------------------------------------------------------------------------
>
> # Core
> poll_method poll # poll, select, epoll ..
>
> # Input
> input_device /dev/event0
> input_port 5555
>
> # SIP
> sip_trans_bsize 128
> #sip_listen 127.0.0.1:5050
>
> # Audio
> audio_dev /dev/audio0.0
> audio_srate 8000-48000
> audio_channels 1-2
> #audio_aec_length 128 # [ms]
>
> # Video
> video_dev
> video_size 352x288
> video_bitrate 384000
> video_fps 25
> #video_selfview window # {window,pip}
>
> # AVT - Audio/Video Transport
> rtp_tos 184
> #rtp_ports 10000-20000
> #rtp_bandwidth 512-1024 # [kbit/s]
> rtcp_enable yes
> rtcp_mux no
> jitter_buffer_delay 5-10 # frames
>
> # Network
> #dns_server 10.0.0.1:53
>
> #------------------------------------------------------------------------------
> # Modules
>
> module_path /usr/local/lib/baresip/modules
>
> # UI Modules
> module stdio.so
> module cons.so
> #module evdev.so
>
> # Audio codec Modules (in order)
> #module g7221.so
> #module g722.so
> module g711.so
> #module gsm.so
> #module l16.so
> #module speex.so
> #module celt.so
> #module bv32.so
>
> # Audio filter Modules (in order)
> # NOTE: AEC should be before Preproc
> #module sndfile.so
> #module speex_aec.so
> #module speex_pp.so
> #module speex_resamp.so
> #module plc.so
>
> # Audio driver Modules
> #module oss.so
> #module alsa.so
> #module portaudio.so
> #module gst.so
>
> # Video codec Modules (in order)
> module avcodec.so
> #module vpx.so
>
> # Video source modules
> #module avformat.so
> #module v4l.so
> #module v4l2.so
>
> # Video display modules
> #module sdl.so
> #module x11.so
>
> # Media NAT modules
> #module stun.so
> #module turn.so
> #module ice.so
>
> # Media encoding modules
> #module srtp.so
>
> # Other modules
> #module natbd.so
>
> #------------------------------------------------------------------------------
> # Module parameters
>
>
> # Speex codec parameters
> speex_quality 7 # 0-10
> speex_complexity 7 # 0-10
> speex_enhancement 0 # 0-1
> speex_vbr 0 # Variable Bit Rate 0-1
> speex_vad 0 # Voice Activity Detection 0-1
> speex_agc_level 8000
>
> # NAT Behavior Discovery
> #natbd_server creytiv.com
> #natbd_interval 600 # in seconds
> /* End ~/.baresip/config */
>
>
> /* uname -a */
> FreeBSD peace 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #4 r244062: Mon Dec
> 10 17:56:25 CST 2012 root@peace:/usr/obj/usr/src/sys/PEACE i386
>
>
> Thanks.
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>
This works for me (not sure about video, works with video loop but have
not found a free sip server that supports video streams..):
#
# baresip configuration
#
#------------------------------------------------------------------------------
# Core
poll_method select # poll, select, epoll ..
# Input
input_device /dev/event0
input_port 5555
# SIP
sip_trans_bsize 128
#sip_listen 127.0.0.1:5050
# Audio
audio_dev /dev/dsp
audio_srate 8000-48000
audio_channels 1-2
audio_aec_length 128 # [ms]
# Video
video_dev /dev/video0
video_size 800x600
video_bitrate 384000
video_fps 25
video_selfview window # {window,pip}
# AVT - Audio/Video Transport
rtp_tos 184
#rtp_ports 10000-20000
#rtp_bandwidth 512-1024 # [kbit/s]
rtcp_enable yes
rtcp_mux no
jitter_buffer_delay 5-10 # frames
# Network
#dns_server 10.0.0.1:53
#------------------------------------------------------------------------------
# Modules
module_path /usr/local/lib/baresip/modules
# UI Modules
module stdio.so
module cons.so
#module evdev.so
# Audio codec Modules (in order)
#module g7221.so
#module g722.so
#module gsm.so
#module l16.so
#module speex.so
module g711.so
#module celt.so
#module bv32.so
# Audio filter Modules (in order)
# NOTE: AEC should be before Preproc
#module sndfile.so
#module speex_aec.so
#module speex_pp.so
#module speex_resamp.so
#module plc.so
# Audio driver Modules
#module oss.so
#module alsa.so
module portaudio.so
# ^^ this enabled SOUND
#module gst.so
# Video codec Modules (in order)
module avcodec.so
module vpx.so
# Video source modules
#module avformat.so
#module v4l.so
module v4l2.so
# ^^ this enabled VIDEO
# Video display modules
#module sdl.so
module x11.so
# Media NAT modules
#module stun.so
#module turn.so
#module ice.so
# Media encoding modules
module srtp.so
# Other modules
#module natbd.so
#------------------------------------------------------------------------------
# Module parameters
# Speex codec parameters
speex_quality 3 # 0-10
speex_complexity 7 # 0-10
speex_enhancement 1 # 0-1
speex_vbr 1 # Variable Bit Rate 0-1
speex_vad 1 # Voice Activity Detection 0-1
speex_agc_level 38000
# NAT Behavior Discovery
natbd_server creytiv.com
natbd_interval 600 # in seconds
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50E58D05.2090408>