Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 Jan 2011 16:15:02 +0100
From:      Rainer Hurling <rhurlin@gwdg.de>
To:        Hans Petter Selasky <hselasky@c2i.net>
Cc:        freebsd-current@freebsd.org, marcus@freebsd.org
Subject:   Re: Endless CAM messages with recent CURRENT
Message-ID:  <4D458076.4050306@gwdg.de>
In-Reply-To: <201101301513.42967.hselasky@c2i.net>
References:  <4D30125C.70607@gwdg.de> <201101142010.25172.hselasky@c2i.net> <4D456E51.3040207@gwdg.de> <201101301513.42967.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 30.01.2011 15:13 (UTC+1), Hans Petter Selasky wrote:
> On Sunday 30 January 2011 14:57:37 Rainer Hurling wrote:
>> On 14.01.2011 20:10 (UTC+1), Hans Petter Selasky wrote:
>>> Marcus,
>>>
>>> Can you have a look at this?
>>
>> Are there any news?
>>
>
> I don't have any news, except it is a HAL problem and it needs to be solved
> there.

Ok, I understand.

Besides this I think that my device is not fully recognized by usb code. 
I only get 'Generic STORAGE DEVICE 9744' instead of something like 
'Genesys Logic, Inc. USB2.0 Multislot Card Reader/Writer'.

Wouldn't it be useful to integrate the device info into the usb driver?

#lssub
Bus 002 Device 002: ID05e3:0716 Genesys Logic, Inc. USB2.0 Multislot 
Card Reader/Writer
idVendor 0x05e3 Genesys Logic, Inc.

#usb-devices
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver=2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P: Vendor=05e3 ProdID=0176 Rev=97.44
S: Product=USB Storage
S: SerialNumber=000000009744
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Rainer

> --HPS




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D458076.4050306>