Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Nov 2002 16:43:22 -0500 (EST)
From:      Dan Langille <dan@langille.org>
To:        stable@freebsd.org
Cc:        dan@langille.org
Subject:   4.7 kernel does not find aha1
Message-ID:  <20021114163407.Y5562-100000@m20.unixathome.org>

next in thread | raw e-mail | index | archive | help
I just did a build world to upgrade to 4.7 from 4.6.  The new kernel does
not detect the aha1 which 4.6 still does.

Here is an extract from the 4.6 dmesg:

lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
aha1: <Adaptec 1542/aha-1535> at port 0x330-0x333 iomem 0xcc000-0xcffff
irq 10 drq 5 on isa0
aha1: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs
IPsec: Initialized Security Association Processing.
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at
ata0-master WDMA2
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da1 at aha1 bus 0 target 3 lun 0
da1: <COMPAQ ST19171W 9A10> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8)
da1: 8678MB (17773500 512 byte sectors: 64H 32S/T 8678C)
da0 at aha1 bus 0 target 0 lun 0
da0: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C)
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled

And here is the same portion from the 4.7 boot:

lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at
ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 6417 free (113 frags, 788 blocks, 0.2% fragmentation)
Can't open /dev/da1s1e: Device not configured
/dev/da1s1e: CAN'T CHECK FILE SYSTEM.
/dev/da1s1e: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 647398 free (40422 frags, 75872 blocks, 3.6%
fragmentation)
/dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 16961 free (257 frags, 2088 blocks, 1.3%
fragmentation)
THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
        /dev/da1s1e (/home/ncvs)
Automatic file system check failed . . . help!
Enter full pathname of shell or RETURN for /bin/sh:

I have checked the kernel config file, aha is in there.  Did I miss
something?  /usr/src/UPGRADING has no mention of ata.  Clues please?


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021114163407.Y5562-100000>