Date: Mon, 14 Apr 2003 17:52:19 +0200 (CEST) From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= <norgaard@math.ku.dk> To: doc@freebsd.org Subject: FreeBSD 4.8 Hardware: SIS650/961 chipset supported Message-ID: <Pine.LNX.4.40.0304141748170.14614-100000@shannon.math.ku.dk>
next in thread | raw e-mail | index | archive | help
Hi, I just wish to update you on hardware supported by FreeBSD 4.8. I have an Asus M2400E notebook with a SIS650/961 integrated chipset, and installed FreeBSD 4.8 without any trouble at all. I have included the dmesg after first boot below. The only thing that do not work is the power management support, but this is hardly surprising since the bios has support for APCI while the 4.8-kernel only supports APM. Regards, Erik Norgaard. dmesg after first boot follows: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Wed Apr 9 17:15:08 CEST 2003 root@cepheus.fs.dk:/usr/src/sys/compile/CEPHEUS Timecounter "i8254" frequency 1193182 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1792.73-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT ,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 117415936 (114664K bytes) avail memory = 108728320 (106180K bytes) Preloaded elf kernel "kernel" at 0xc055e000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 5 entries at 0xc00f1d30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <SiS model 6325 VGA-compatible display device> at 0.0 irq 11 isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 11 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 11 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA100 controller> port 0xb800-0xb80f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <SiS 7012> port 0xa400-0xa47f,0xa800-0xa8ff irq 11 at device 2.7 on pci0 pcm0: <SigmaTel STAC9721/9723 ac97 codec> sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem 0xe6000000-0xe6000fff irq 11 at device 3.0 on pci0 sis0: Ethernet address: 00:0c:6e:0d:91:bb miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0 pcic1: PCI Memory allocated: 0x88001000 pccard1: <PC Card 16-bit bus (classic)> on pcic1 pci0: <unknown card> (vendor=0x1180, dev=0x0552) at 10.2 irq 11 pci0: <unknown card> (vendor=0x14f1, dev=0x2f00) at 12.0 irq 11 pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pca0 at port 0x40 on isa0 ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100 acd0: CD-RW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a Please check http://www.telho.net/M2E/ for more details. Strandboulevarden 75, 3. tv. E-mail: norgaard@math.ku.dk DK-2100 Copenhagen E Cell, dk: +45 2849 3936 Denmark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.40.0304141748170.14614-100000>