Date: Thu, 23 Mar 2006 09:21:06 -0500 (EST) From: jason kawaja <kawaja@ece.ufl.edu> To: freebsd-scsi@freebsd.org Subject: Re: qlogic isp 6312 device not showing up Message-ID: <Pine.BSF.4.62.0603230913420.35477@felix.ece.ufl.edu> In-Reply-To: <Pine.BSF.4.62.0603230716250.35477@felix.ece.ufl.edu> References: <Pine.BSF.4.62.0603210739370.17308@felix.ece.ufl.edu> <44200030.9090400@centtech.com> <Pine.BSF.4.62.0603210924180.17308@felix.ece.ufl.edu> <Pine.BSF.4.62.0603211022260.17308@felix.ece.ufl.edu> <Pine.BSF.4.62.0603230716250.35477@felix.ece.ufl.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 23 Mar 2006, jason kawaja wrote: > after getting the scsi errors resolved on the remote fc device, the > problem remains so i am going to replace the current qla200 card with > qla23xx to see if the fc device can then be seen by freebsd. (the > qla23xx card previously worked on a similar freebsd system.) indeed the qla23xx card works (disk device shows up within freebsd) when the same fc device was unable to to work with the qla200 card (no changes to freebsd system/kernel). isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xdefff000-0xdeffffff irq 96 at device 4.0 on pci4 isp0: [GIANT-LOCKED] isp0: bad execution throttle of 0- using 16 isp0: bad hard address 125- resetting to zero <snip> da0 at isp0 bus 0 target 0 lun 0 da0: <IBM 2105800 .124> Fixed Direct Access SCSI-3 device da0: 200.000MB/s transfers, Tagged Queueing Enabled da0: 953MB (1953152 512 byte sectors: 64H 32S/T 953C) cant say i like the fact that the fc disk get assigned as da0 causing my local scsi devices to get bumped (require /etc/fstab alterations) but that appears in linux as well so is not likely freebsd related. -- Jason Kawaja 2-4568 http://www.ietf.org/rfc/rfc1855.txt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.62.0603230913420.35477>