Date: Sat, 01 Aug 2015 15:28:05 -0700 From: Ross Penner <rossp@f-m.fm> To: freebsd-questions@freebsd.org Subject: IPV6 via the builtin ppp Message-ID: <1438468085.330900.345290473.14B4D01E@webmail.messagingengine.com>
next in thread | raw e-mail | index | archive | help
I use a freebsd 10.1 machine as my home gateway and I have been unsuccessful in getting it configure an IPV6 address over the pppoe connection. When I connected my Ubuntu 14.04 computer directly to the modem, the IPV6 network was properly configured. I'm using pf as well but it's not starting until pppoe connection is completed. I've attached the ppp.conf file, the ppp.log file, and the output from ifconfig. If anybody has any idea what I've configured wrong, or if there is any other information that would be useful, I'd be happy to hear your thoughts. Thanks ifconfig tun0 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1452 options=80000<LINKSTATE> inet6 fe80::222:4dff:fe9d:9200%tun0 prefixlen 64 scopeid 0x7 inet XXX.XXX.XXX.XXX --> XXX.XXX.XXX.XXX netmask 0xffffffff nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Opened by PID 484 my ppp.conf file is: ### default: set log Phase tun command set ifaddr 10.0.0.1/0 10.0.0.2/0 TekSavvy: set device PPPoE:ue0 set authname XXXX@teksavvy.com set authkey XXXX set dial set login add default HISADDR add default HISADDR6 enable dns ### my ppp.log file is: ### Aug 1 13:26:21 rosbox ppp[484]: tun0: Phase: deflink: Connected! Aug 1 13:26:21 rosbox ppp[484]: tun0: Phase: deflink: opening -> dial Aug 1 13:26:21 rosbox ppp[484]: tun0: Phase: deflink: dial -> carrier Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: Disconnected! Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: carrier -> hangup Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: 0 packets in, 0 packets out Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Aug 1 13:26:21 2015 Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: hangup -> opening Aug 1 13:26:26 rosbox ppp[484]: tun0: Phase: deflink: Enter pause (30) for redialing. Aug 1 13:26:56 rosbox ppp[484]: tun0: Phase: deflink: Connected! Aug 1 13:26:56 rosbox ppp[484]: tun0: Phase: deflink: opening -> dial Aug 1 13:26:56 rosbox ppp[484]: tun0: Phase: deflink: dial -> carrier Aug 1 13:26:57 rosbox ppp[484]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "XXXXXXX") Aug 1 13:26:57 rosbox ppp[484]: tun0: Phase: Received NGM_PPPOE_SESSIONID Aug 1 13:26:57 rosbox ppp[484]: tun0: Phase: Received NGM_PPPOE_SUCCESS Aug 1 13:26:57 rosbox ppp[484]: tun0: Phase: deflink: carrier -> login Aug 1 13:26:57 rosbox ppp[484]: tun0: Phase: deflink: login -> lcp Aug 1 13:26:58 rosbox ppp[484]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 Aug 1 13:26:58 rosbox ppp[484]: tun0: Phase: bundle: Authenticate Aug 1 13:26:58 rosbox ppp[484]: tun0: Phase: deflink: his = CHAP 0x05, mine = none Aug 1 13:26:58 rosbox ppp[484]: tun0: Phase: Chap Input: CHALLENGE (22 bytes from XXXXXXXX) Aug 1 13:26:58 rosbox ppp[484]: tun0: Phase: Chap Output: RESPONSE (XXXXX@teksavvy.com) Aug 1 13:26:59 rosbox ppp[484]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 Aug 1 13:26:59 rosbox ppp[484]: tun0: Phase: deflink: his = PAP, mine = none Aug 1 13:26:59 rosbox ppp[484]: tun0: Phase: Pap Output: XXXXX@teksavvy.com ******** Aug 1 13:26:59 rosbox ppp[484]: tun0: Phase: Pap Input: SUCCESS () Aug 1 13:26:59 rosbox ppp[484]: tun0: Phase: deflink: lcp -> open Aug 1 13:26:59 rosbox ppp[484]: tun0: Phase: bundle: Network Aug 1 13:26:59 rosbox ppp[484]: tun0: Error: rt_Set: Cannot add a route with gateway 0.0.0.0 Aug 1 13:26:59 rosbox ppp[484]: tun0: Warning: 0.0.0.0: Change route failed: errno: No such process Aug 1 13:26:59 rosbox ppp[484]: tun0: Warning: ipv6_Input: IPV6CP not open - packet dropped ###
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1438468085.330900.345290473.14B4D01E>