Date: Wed, 3 Feb 1999 15:08:23 -0500 From: "Milliken, Scott" <MillikS@sti.imshealth.com> To: "'Mike Smith'" <mike@smith.net.au>, "Milliken, Scott" <MillikS@sti.imshealth.com> Cc: "'freebsd-stable@freebsd.org'" <freebsd-stable@FreeBSD.ORG> Subject: RE: 3.0 sysinstall hangs on Compaq Deskpro 6000 Message-ID: <C26E7066AAA6D211AB16006097A52FCC5F61AA@STIUSATLCX1.salestech.com>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_000_01BE4FB0.F406A18A
Content-Type: text/plain
Mike and Other Gurus:
The system is a Compaq Deskpro 6000 configured as follows:
Pentium 166 MMX
64 MB RAM
Adaptec 2940 Ultra SCSI Adapter, BIOS version 1.23S3
Integrated Netflex 3 ethernet
ESS1688 Sound Card
SCSI Devices on Bus 0:
0 1 GB Compaq (Seagate)
1 2 GB Compaq (Seagate)
5 Plextor PX-R24CS external CDR
Integrated Matrox MGA
Floppy drive
Integrated dual IDE
Hitachi IDE CDROM drive
The drive activity lights blink for a short period when first starting up
sysinstall but quickly die out. At that point the keyboard is completely
locked up and the system has to be powered off. I did manage to hit Alt-F2
right before the hang up (when running from the boot floppy) and I got the
following messages:
DEBUG: ioctl(3, TIOCCONS, NULL) = 0 (success)
DEBUG: Found a network device named xl0
wcd0: cannot read audio disc
DEBUG: Found a CDROM device for /dev/wcd0c
There is no disc in wcd0, so that all looks normal to me. Attached is the
output of dmesg on the upgraded system, which, as I said, also locks up
during /stand/sysinstall.
Thanks,
Scott
> <<dmesg.log>>
------_=_NextPart_000_01BE4FB0.F406A18A
Content-Type: application/octet-stream;
name="dmesg.log"
Content-Disposition: attachment;
filename="dmesg.log"
Content-Location: ATT-0-28BE5FEB8ABBD211AB1F006097A52FCC-d
mesg.log
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-STABLE #0: Wed Feb 3 14:39:04 GMT 1999
root@stlabl01.salestech.com:/usr/src/sys/compile/ims_health
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67104768 (65532K bytes)
config> quit
avail memory = 62128128 (60672K bytes)
Preloaded elf kernel "kernel" at 0xf02e2000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int \M^D irq 192 on pci0.0.0
chip1: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int j irq 160 on pci0.0.1
chip2: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int j irq 32 on pci0.0.2
chip3: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int i irq 160 on pci0.0.3
chip4: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int i irq 32 on pci0.0.4
chip5: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int h irq 160 on pci0.0.5
chip6: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int h irq 32 on pci0.0.6
chip7: <Host to PCI bridge (vendor=0e11 device=4000)> rev 0x01 int g irq 160 on pci0.0.7
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 11 on pci0.7.0
xl0: <3Com 3c900 Etherlink XL 10BaseT> rev 0x00 int a irq 9 on pci0.8.0
xl0: Ethernet address: 00:60:97:7c:a5:2a
xl0: selecting 10baseT transceiver, half duplex
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.9.0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
tl0: <Compaq NetFlex-3/P Integrated> rev 0x10 int a irq 255 on pci0.11.0
create_intr: requested irq255 too high, limit is 15
tl0: couldn't map interrupt
chip8: <PCI to ISA bridge (vendor=0e11 device=a0f3)> rev 0x0a on pci0.15.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x0a int a irq 14 on pci0.15.1
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0x10
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-7930/1022>, removable, accel, dma, iordy
acd0: drive speed 1377KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s2a
da1 at ahc0 bus 0 target 1 lun 0
da1: <COMPAQPC ST32155N 0420> Fixed Direct Access SCSI-2 device
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-R PX-R24CS 1.40> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQPC ST31055N 0420> Fixed Direct Access SCSI-2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C)
------_=_NextPart_000_01BE4FB0.F406A18A--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C26E7066AAA6D211AB16006097A52FCC5F61AA>