Date: Wed, 16 Feb 2005 12:45:48 -0200 From: Marcus Grando <marcus@corp.grupos.com.br> To: freebsd-stable@freebsd.org Subject: Re: UDMA ICRC error Message-ID: <42135C9C.2020007@corp.grupos.com.br> In-Reply-To: <20050216143105.57059.qmail@web54003.mail.yahoo.com> References: <20050216143105.57059.qmail@web54003.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have this problem too... -- # dmesg | egrep "(ata|ad0)" -- atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> ad0: 9787MB <QUANTUM FIREBALLlct20 10/APL.0900> [19885/16/63] at ata0-master PIO4 Mounting root from ufs:/dev/ad0s1a ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4700543 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4701151 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4701535 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4701663 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4701791 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4701791 ad0: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=4701791 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702047 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702047 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702175 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702239 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702367 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702367 ad0: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=4702367 ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=4702911 -- -- pciconf -l -v -- agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x70061022 rev=0x25 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-751 Processor-to-PCI Bridge / Memory Ctrlr' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x70071022 rev=0x01 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' device = 'AMD-751 AGP and PCI-to-PCI Bridge (1x/2x AGP)' class = bridge subclass = PCI-PCI rl0@pci0:6:0: class=0x020000 card=0x310711ad chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class = network subclass = ethernet isab0@pci0:7:0: class=0x060100 card=0x00001106 chip=0x06861106 rev=0x1b hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82C686/A/B "Super South" PCI to ISA Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:7:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' class = mass storage subclass = ATA none0@pci0:7:4: class=0x0c0500 card=0x00000000 chip=0x30571106 rev=0x20 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82C686A/B ACPI Power Management Controller' class = serial bus subclass = SMBus none1@pci1:5:0: class=0x030000 card=0x00841002 chip=0x47421002 rev=0x5c hdr=0x00 vendor = 'ATI Technologies Inc.' device = 'ATI GTC (GT-C2U2) ATI 3D Rage Pro Turbo AGP 2X' class = display subclass = VGA -- Rob wrote: > Ramiro Aceves wrote: > >>I have read that others had this problem before. I >>just write this report for you to know. >> >>When I installed FreeBSD 5.3 R, I get some errors >>like this, but I could end the install: >> >>ad0: WARNING -READ_DMA UDMA ICRC error (retrying >> request) LBA=5313599 >>ad0: FAILURE -READ_DMA status=51<READY,DSC,ERROR> >> error=84 >ICRC,ABORTED> >>spec_getpages:(ad0s1a) I/O read failure: (error=5) >>................ >> >>I have solved the problem disabling DMA: >>hw.ata.ata_dma="0" >> >>(I previously tried disabling ACPI with no success, >>and playing with BIOS LBA, LARGE, NORMAL settings >>at the BIOS with no success). >> >>Now ad0: works in PIO4 mode and everything is fine, >>previously , it was UDMA33. Now there are no errors. > > > There's you and me now. I have this problem with two > of my PCs. I don't know yet of anybody else who has > these problems. > > It's indeed a serious problem, but too few people > running 5.3 seem to suffer from this. > > Have you tried with 4.11? > I bet that would not generate these problems. > > Regards, > Rob. > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" -- Marcus Grando Grupos Internet S/A marcus(at)corp.grupos.com.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42135C9C.2020007>