Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 4 Feb 1999 00:23:47 +0800 (CST)
From:      Chia-liang Kao <clkao@CirX.ORG>
To:        wpaul@skynet.ctr.columbia.edu
Cc:        current@FreeBSD.ORG
Subject:   Re: problem with vr0
Message-ID:  <199902031623.AAA43583@genius.cirx.org>
In-Reply-To: <199902031613.LAA06847@skynet.ctr.columbia.edu> (message from Bill Paul on Wed, 3 Feb 1999 11:12:59 -0500 (EST))
References:   <199902031613.LAA06847@skynet.ctr.columbia.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
* From: Bill Paul <wpaul@skynet.ctr.columbia.edu>
* Date: Wed, 3 Feb 1999 11:12:59 -0500 (EST)
* 
* What kind of machine/CPU does your friend have?

my friend's:
CPU: Pentium II (233.86-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping=4
  Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3
vr0: <VIA VT3043 Rhine I 10/100BaseTX> rev 0x06 int a irq 10 on pci0.11.0
vr0: Ethernet address: 00:80:c8:ef:3c:3f
vr0: autoneg complete, link status good (half-duplex, 10Mbps)

Mine:
CPU: Pentium/P54C (133.64-MHz 586-class CPU)
Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
chip0: <Intel 82437VX PCI cache memory controller> rev 0x01 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vr0: <VIA VT3043 Rhine I 10/100BaseTX> rev 0x06 int a irq 12 on pci0.19.0
vr0: Ethernet address: 00:80:c8:ef:82:09
vr0: autoneg complete, link status good (half-duplex, 10Mbps)

* Hm. I have some more questions:
* 
* - In your first posting, you mentioned this:
*   vr0: <VIA VT3043 Rhine I 10/100BaseTX> rev 0x06 int a irq 12 on pci0.19.0
*   IRQ 12 is normally used by the mouse (if you have a PS/2 mouse). Do you
*   have a mouse or PS/2 mouse port on this machine? (I suspect you don't but
*   I have to ask.)

No, I use a mouse connected to com port. Actually we thought of the problem
caused by irq conflicts, and we made sure it wasn't happening.

It is very strange that when I used the incorporated diagnose program,
I can connect to my friend's dfe530, running the same program.

* - How many PCI bus slots does your machine have?

I have 3 PCI bus slots. It's quite an old machine.

* - Have you tried putting the vr0 card in a different slot? Have you tried
*   putting it in the slot where the de0 card is now?

Yes, I had previously done exactly the same test you mentioned.

* - What PCI chipset do you have? The test machine in which I currently have
*   my sample VIA Rhine card installed is an Intel Pentium 200 system that
*   says the following:

As you can see in the top of this mail, my chipset configuration
seemed to be identical as yours.

* - Can you show me the output of the following:
* 
*   pciconf -r pci0:19:0 0xc
* 
*   I want to see what the latency timer setting looks like.
It shows `0x00002008'

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902031623.AAA43583>