Date: Thu, 6 Feb 2003 20:27:45 +0100 From: Andrea Franceschini <andrea.franceschini@postecom.it> To: freebsd-hardware@FreeBSD.ORG Subject: Wireless(if_wi): supported card attachment problems Message-ID: <20030206192745.GB13424@postecom.it>
next in thread | raw e-mail | index | archive | help
Hi All!
I bought a card that, according to the man page of wi driver, should have been supported.
The card is a Sohoware/NCP 130 and this is the output of 'man wi':
The following cards are among those supported by the wi driver:
Card Chip Bus
----------------------------------------------------------------
..
..
NANOSPEED ROOT-RZ2000 Prism-II PCMCIA
--> NDC/Sohoware NCP130 Prism-II PCI <--
NEC CMZ-RT-WP Prism-II PCMCIA
...
But the driver simply doesn't see it...
This is the output of pciconf :
none2@pci0:8:0: class=0x028000 card=0x013115e8 chip=0x013115e8 rev=0x01 hdr=0x00
vendor = 'National Datacomm Corp.'
device = 'Prism II InstantWave HR PCI card'
class = network
I modified the driver sources and i added my card among those supported:
static struct {
unsigned int vendor,device;
int bus_type;
char *desc;
} pci_ids[] = {
/* Sorted by description */
{0x10b7, 0x7770, WI_BUS_PCI_PLX, "3Com Airconnect"},
{0x16ab, 0x1101, WI_BUS_PCI_PLX, "GLPRISM2 WaveLAN"},
{0x1260, 0x3873, WI_BUS_PCI_NATIVE, "Intersil Prism2.5"},
{0x16ab, 0x1102, WI_BUS_PCI_PLX, "Linksys WDT11"},
{0x1385, 0x4100, WI_BUS_PCI_PLX, "Netgear MA301"},
{0x1638, 0x1100, WI_BUS_PCI_PLX, "PRISM2STA WaveLAN"},
--> {0x15E8, 0x0131, WI_BUS_PCI_PLX, "Prism II InstantWave HR PCI card"}
and in this flavour
--> {0x15E8, 0x0131, WI_BUS_PCI_NATIVE, "Prism II InstantWave HR PCI card"}
Because I didnt know if the card was PLX based or not.
Now I get the following messages:
wi0: <Prism II InstantWave HR PCI card> port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0
wi0: No Mem space on prism2.5?
device_probe_and_attach: wi0 attach returned 6
or
wi0: <Prism II InstantWave HR PCI card> port 0xdc00-0xdc3f,0xd800-0xd80f irq 11 at device 8.0 on pci0
wi0: No I/O space?!
device_probe_and_attach: wi0 attach returned 6
Using the WI_BUS_PCI_PLX.
I have a FreeBSD 4.7 system with no other cards except for the NCP130.
Does anyone have some ideas?
Thanks!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030206192745.GB13424>