Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 29 Sep 2007 04:07:33 +0100
From:      Chris <chrcoluk@gmail.com>
To:        pyunyh@gmail.com
Cc:        FreeBSD Stable <freebsd-stable@freebsd.org>, freebsd-hardware@freebsd.org
Subject:   Re: nfe driver 6.2 stable
Message-ID:  <3aaaa3a0709282007s1675b714g71d025f87dd1c350@mail.gmail.com>
In-Reply-To: <20070929012801.GA11457@cdnetworks.co.kr>
References:  <3aaaa3a0709231657r3264c873ife71800731608b03@mail.gmail.com> <20070924020116.GA36909@eos.sc1.parodius.com> <3aaaa3a0709240844j2603a050nd09bb5482a0f3c21@mail.gmail.com> <20070927065155.GE3692@cdnetworks.co.kr> <3aaaa3a0709271030k24892099ra3409ce6f5f7020f@mail.gmail.com> <20070928000656.GA7119@cdnetworks.co.kr> <3aaaa3a0709281105g1503fdbcu70910de6eae060a0@mail.gmail.com> <20070929012801.GA11457@cdnetworks.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
On 29/09/2007, Pyun YongHyeon <pyunyh@gmail.com> wrote:
> On Fri, Sep 28, 2007 at 07:05:35PM +0100, Chris wrote:
>  > On 28/09/2007, Pyun YongHyeon <pyunyh@gmail.com> wrote:
>  > > On Thu, Sep 27, 2007 at 06:30:20PM +0100, Chris wrote:
>  > >  > On 27/09/2007, Pyun YongHyeon <pyunyh@gmail.com> wrote:
>  > >  > > On Mon, Sep 24, 2007 at 04:44:09PM +0100, Chris wrote:
>  > >
>  > > [...]
>  > >  > >
>  > >  > >  > The card is more stable when using nve driver no crashes still but the
>  > >  > >  > performance is around the same maxing out at around 200mbit.  I was
>  > >  > >  > expecting nearer 400-500mbit.
>  > >  > >  >
>  > >  > >  > e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
>  > >  > >  >
>  > >  > >
>  > >  > > There had been issues nfe(4) with 88E1116/88E1149 PHYs but your issue
>  > >  > > seems to be different one. How about manually set media configuration?
>  > >  > > For example, "ifconfig nfe0 media 1000baseTX mediaopt full-duplex"
>  > >  > >
>  > >
>  > > [...]
>  > >
>  > >  >
>  > >  > I typod I meant to say nve was unstable and nfe has been rock solid so
>  > >  > great work with the driver.  I enabled mpsafe now and still no
>  > >  > problems and its gave me a little more performance as well, a shame my
>  > >  > nic has no hardware features (unusual for a gigabit nic) but overall
>  > >  > glad its at least stable.
>  > >  >
>  > >
>  > > How did you check network performance?
>  > > Maxing out at around 200Mbps seems weird. Personally, I had never seen
>  > > GigE hardwares that saturate at 200Mbps. One of causes I can think of
>  > > is speed/duplex mismatches with link partner. Manually setting
>  > > speed/duplex might fix your performance issue, I guess.
>  > >
>  > > --
>  > > Regards,
>  > > Pyun YongHyeon
>  > >
>  >
>  > These are ftp transfers it is running on a amd62 x2 dual core
>  > processor and gig of ram, when at max speed cpu usage is very high in
>  > excess of 80% but not completely maxed out.  It now seems to be able
>  > to sustain around 30meg/sec the highest I have seen I havent done any
>  > other testing so if you have a better way it would be good to know
>
> ftp transfers involve disk activities so you're not measuring NIC
> performance. Try one of benchmark programs in ports/benchmarks
> (e.g. netperf, iperf, ttcp etc).
> ATM nfe(4)'s interrupt moderation mechanism doesn't seem to work
> at all so nfe(4) generates too many interrupts. However I don't
> think it wouldn't be major bottleneck of the performance.
>
>  > thanks.  Please bare in mind I have no local access to the server so
>  > crashing it eg. is expensive for as will have to pay for a kvm switch
>  > netstat -i indicates no collisions for a duplex mismatch so not keen
>  > on trying a manual negotiotian again for reasons above.  So even for a
>  > card with no hardware features you would expect it to exceed 200mbit
>  > easily?
>  >
>
> Yes. You have a gigabit ethernet controller and fast CPU.
> Run one of benchmark programs and get a number.
>
>  > I havent enabled net isr setting I wonder if that will help.
>  >
>
> That wouldn't help a lot, I guess.
>
>  > Chris
>
> --
> Regards,
> Pyun YongHyeon
>


Will let you know results thanks, also will polling work on my card?

Chris



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3aaaa3a0709282007s1675b714g71d025f87dd1c350>