Date: Tue, 7 Jan 2014 11:05:29 +0800 From: Huang Wen Hui <huanghwh@gmail.com> To: "Lundberg, Johannes" <johannes@brilliantservice.co.jp> Cc: Hans Petter Selasky <hps@bitfrost.no>, Adrian Chadd <adrian@freebsd.org>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: Install 10.0-RC3 on MacBookPro Late 2013 Message-ID: <CAB8uncbAMhaC3GkAqqny6Rpe0C-%2BZ5=dxdrL=OYfbau4T9P-jg@mail.gmail.com> In-Reply-To: <CAASDrVmMuX4OrEAyL6SQ_vcC6nKz0uOmbr1vJp4gcwGj1tCMog@mail.gmail.com> References: <CAB8uncZO19Aen%2BuQRgO3whSOTVM%2BftcsGrJuGZZd4Qbd1Zf5mw@mail.gmail.com> <CAJ-Vmo=g-iVjNjygY93MVinptkA7HazJ3FRu1PsfKZtj-fubgg@mail.gmail.com> <CAB8unca6XZSEa8=c21yDJ=ueuUiW=D4v2PcLEzgt_sfTgsuzqA@mail.gmail.com> <CAB8unca8G32qcz67EaRdqrSBuO0YiBV4zL7fV3EfMozdeSsBQA@mail.gmail.com> <52CA56E5.8030101@bitfrost.no> <CAJ-Vmo=AxbQ9MMtkB_W3YW0s9QwmR8qWzgprOM_66MQqcgmdNQ@mail.gmail.com> <CAB8uncbjhzG-9BYbYH6skhnf-O24hDeX644aEpz162C-FHWTFA@mail.gmail.com> <52CA6E3F.9000301@bitfrost.no> <CAB8uncah%2BCOOptDmOiaKseqfDyeVd3veg2RLREOzfYtaJhfLYA@mail.gmail.com> <52CA7CE0.7070202@bitfrost.no> <CAJ-Vmok16O0hR9G9rhVeO6Ki3yn4DZgjj4s65ddhQS5MZXVeXw@mail.gmail.com> <52CACBB8.1020905@bitfrost.no> <52CB2591.9050401@bitfrost.no> <CAB8uncYnbto=vavyWEWjwPtYqn4Uthb-V6YHXeqd3G01=f8UbQ@mail.gmail.com> <CAASDrVmMuX4OrEAyL6SQ_vcC6nKz0uOmbr1vJp4gcwGj1tCMog@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
USB problem fixed by revert to r245731, set "hint.ahci.0.msi=3D0" seem to fixed timeout problem of AHCI. Random hang I think still exist, will check later... Cheers, Huang Wen Hui 2014/1/7 Lundberg, Johannes <johannes@brilliantservice.co.jp> > Hi Huang > > Good job!! By "works", which parts do you mean has been fixed? > > 1. USB problem > or > 2. AHCI timeout problem > or > 3. Random hang > > Best regards! > > -- > Johannes Lundberg > BRILLIANTSERVICE CO., LTD. > > > On Tue, Jan 7, 2014 at 11:30 AM, Huang Wen Hui <huanghwh@gmail.com> wrote= : > >> Hans, >> >> This wild guess do NOT works. >> I binary sect xhci.c in SVN, found that *r245732 >> *<http://svnweb.freebsd.org/base?view=3Drevision&revision=3D245732>* >> introduce the bug.* >> <http://svnweb.freebsd.org/base?view=3Drevision&revision=3D245732>; >> >> revert to r345731 fixed this USB problem in 9.2R >> >> I also copy xhci_interrupt(struct xhci_softc *sc) from 9.1R to CURRENT, >> CURRENT also works! >> >> Cheers, >> Huang Wen Hui. >> >> >> 2014/1/7 Hans Petter Selasky <hps@bitfrost.no> >> >> > On 01/06/14 16:28, Hans Petter Selasky wrote: >> > >> >> On 01/06/14 15:17, Adrian Chadd wrote: >> >> >> >>> Right, but it used to work. That's the confusing bit. How'd you make >> >>> it not work? :) >> >>> >> >> >> >> Binary sect the sys/dev/usb/controller/xhci.c revision history? There >> >> has been several bug reports for the Lynx point, and others XHCI >> >> chipsets are working just fine. >> >> >> >> >> > A wild guess: >> > >> > Copy the USB-code from -current. >> > >> > Add "#if 0" as shown sys/dev/usb/controller/xhci_pci.c >> > >> > static int >> > xhci_pci_port_route(device_t self, uint32_t set, uint32_t clear) >> > { >> > #if 0 >> > uint32_t temp; >> > >> > temp =3D pci_read_config(self, PCI_XHCI_INTEL_USB3_PSSEN, 4) | >> > pci_read_config(self, PCI_XHCI_INTEL_XUSB2PR, 4); >> > >> > temp |=3D set; >> > temp &=3D ~clear; >> > >> > pci_write_config(self, PCI_XHCI_INTEL_USB3_PSSEN, temp, 4); >> > pci_write_config(self, PCI_XHCI_INTEL_XUSB2PR, temp, 4); >> > >> > device_printf(self, "Port routing mask set to 0x%08x\n", temp)= ; >> > #endif >> > return (0); >> > } >> > >> > --HPS >> > >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.or= g >> " >> > > > =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-= =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D- > =E7=A7=98=E5=AF=86=E4=BF=9D=E6=8C=81=E3=81=AB=E3=81=A4=E3=81=84=E3=81=A6= =EF=BC=9A=E3=81=93=E3=81=AE=E9=9B=BB=E5=AD=90=E3=83=A1=E3=83=BC=E3=83=AB=E3= =81=AF=E3=80=81=E5=90=8D=E5=AE=9B=E4=BA=BA=E3=81=AB=E9=80=81=E4=BF=A1=E3=81= =97=E3=81=9F=E3=82=82=E3=81=AE=E3=81=A7=E3=81=82=E3=82=8A=E3=80=81=E7=A7=98= =E5=8C=BF=E7=89=B9=E6=A8=A9=E3=81=AE=E5=AF=BE=E8=B1=A1=E3=81=A8=E3=81=AA=E3= =82=8B=E6=83=85=E5=A0=B1=E3=82=92=E5=90=AB=E3=82=93=E3=81=A7=E3=81=84=E3=81= =BE=E3=81=99=E3=80=82 > =E3=82=82=E3=81=97=E3=80=81=E5=90=8D=E5=AE=9B=E4=BA=BA=E4=BB=A5=E5=A4=96= =E3=81=AE=E6=96=B9=E3=81=8C=E5=8F=97=E4=BF=A1=E3=81=95=E3=82=8C=E3=81=9F=E5= =A0=B4=E5=90=88=E3=80=81=E3=81=93=E3=81=AE=E3=83=A1=E3=83=BC=E3=83=AB=E3=81= =AE=E7=A0=B4=E6=A3=84=E3=80=81=E3=81=8A=E3=82=88=E3=81=B3=E3=81=93=E3=81=AE= =E3=83=A1=E3=83=BC=E3=83=AB=E3=81=AB=E9=96=A2=E3=81=99=E3=82=8B=E4=B8=80=E5= =88=87=E3=81=AE=E9=96=8B=E7=A4=BA=E3=80=81 > =E8=A4=87=E5=86=99=E3=80=81=E9=85=8D=E5=B8=83=E3=80=81=E3=81=9D=E3=81=AE= =E4=BB=96=E3=81=AE=E5=88=A9=E7=94=A8=E3=80=81=E3=81=BE=E3=81=9F=E3=81=AF=E8= =A8=98=E8=BC=89=E5=86=85=E5=AE=B9=E3=81=AB=E5=9F=BA=E3=81=A5=E3=81=8F=E3=81= =84=E3=81=8B=E3=81=AA=E3=82=8B=E8=A1=8C=E5=8B=95=E3=82=82=E3=81=95=E3=82=8C= =E3=81=AA=E3=81=84=E3=82=88=E3=81=86=E3=81=8A=E9=A1=98=E3=81=84=E7=94=B3=E3= =81=97=E4=B8=8A=E3=81=92=E3=81=BE=E3=81=99=E3=80=82 > --- > CONFIDENTIALITY NOTE: The information in this email is confidential > and intended solely for the addressee. > Disclosure, copying, distribution or any other action of use of this > email by person other than intended recipient, is prohibited. > If you are not the intended recipient and have received this email in > error, please destroy the original message. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB8uncbAMhaC3GkAqqny6Rpe0C-%2BZ5=dxdrL=OYfbau4T9P-jg>