Date: Thu, 14 May 2015 17:56:17 +0200 From: "jurgenxiv@t-online.de" <jurgenxiv@t-online.de> To: "freebsd-usb@freebsd.org" <freebsd-usb@freebsd.org> Subject: Re: USB Virtualbox Message-ID: <1800483635554c5a15347d1.39228829@email.t-online.de> In-Reply-To: <5554C159.6080507@selasky.org> References: <5554C159.6080507@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
how can I check if there is a missing driver?
This is the full output of "pciconf -lv". Again, thank you for your help.
"hostb0@pci0:0:0:0: class=0x060000 card=0x75811462 chip=0xd1318086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor DMI'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:3:0: class=0x060400 card=0x75811462 chip=0xd1388086 rev=0x11 hdr=0x01
vendor = 'Intel Corporation'
device = 'Core Processor PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
none0@pci0:0:8:0: class=0x088000 card=0x00810062 chip=0xd1558086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor System Management Registers'
class = base peripheral
none1@pci0:0:8:1: class=0x088000 card=0x00810062 chip=0xd1568086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor Semaphore and Scratchpad Registers'
class = base peripheral
none2@pci0:0:8:2: class=0x088000 card=0x00810062 chip=0xd1578086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor System Control and Status Registers'
class = base peripheral
none3@pci0:0:8:3: class=0x088000 card=0x00810062 chip=0xd1588086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor Miscellaneous Registers'
class = base peripheral
none4@pci0:0:16:0: class=0x088000 card=0x00810062 chip=0xd1508086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor QPI Link'
class = base peripheral
none5@pci0:0:16:1: class=0x088000 card=0x00810062 chip=0xd1518086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Core Processor QPI Routing and Protocol Registers'
class = base peripheral
ehci0@pci0:0:26:0: class=0x0c0320 card=0x75811462 chip=0x3b3c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
hdac0@pci0:0:27:0: class=0x040300 card=0x75811462 chip=0x3b568086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset High Definition Audio'
class = multimedia
subclass = HDA
pcib2@pci0:0:28:0: class=0x060400 card=0x75811462 chip=0x3b428086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:1: class=0x060400 card=0x75811462 chip=0x3b448086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset PCI Express Root Port 2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:2: class=0x060400 card=0x75811462 chip=0x3b468086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:3: class=0x060400 card=0x75811462 chip=0x3b488086 rev=0x05 hdr=0x01
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x75811462 chip=0x3b348086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib6@pci0:0:30:0: class=0x060401 card=0x75811462 chip=0x244e8086 rev=0xa5 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x75811462 chip=0x3b028086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series Chipset LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci1@pci0:0:31:2: class=0x010601 card=0x75811462 chip=0x3b228086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller'
class = mass storage
subclass = SATA
none6@pci0:0:31:3: class=0x0c0500 card=0x75811462 chip=0x3b308086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '5 Series/3400 Series Chipset SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0@pci0:1:0:0: class=0x030000 card=0x30361462 chip=0x68101002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
class = display
subclass = VGA
none7@pci0:1:0:1: class=0x040300 card=0xaab01462 chip=0xaab01002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
class = multimedia
subclass = HDA
re0@pci0:2:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
re1@pci0:3:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
none8@pci0:4:0:0: class=0x0c0010 card=0x581d1462 chip=0x34031106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VT6315 Series Firewire Controller'
class = serial bus
subclass = FireWire
atapci0@pci0:5:0:0: class=0x010185 card=0x75811462 chip=0x2363197b rev=0x03 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'JMB363 SATA/IDE Controller'
class = mass storage
subclass = ATA"
-----Original-Nachricht-----
Betreff: Re: USB Virtualbox
Datum: Thu, 14 May 2015 17:37:17 +0200
Von: Hans Petter Selasky <hps@selasky.org>
An: "jurgenxiv@t-online.de" <jurgenxiv@t-online.de>, "freebsd-usb@freebsd.org" <freebsd-usb@freebsd.org>
On 05/14/15 12:20, jurgenxiv@t-online.de wrote:
> I am running freebsd 10. Setting hw.usb.ehci.no_hs=1 at the loader prompt leads to the following usbconfig (with no devices available).
>
> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
>
> That's really frustrating. Maybe I have to buy pci usb host controller and try again? Or is this not a hardware related problem?
>
Hi,
Maybe there is a missing driver for an OHCI or UHCI driver, which is
needed for FULL speed operation. Can you check output from "pciconf
-lv". Else you cannot force devices into FS mode unless using a FS HUB.
--HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1800483635554c5a15347d1.39228829>