Date: Sun, 9 Oct 2005 17:36:10 -0400 From: "Joshua Coombs" <jcoombs@gwi.net> To: freebsd-current@freebsd.org Subject: Success, kinda... Message-ID: <dic2gb$6cp$1@sea.gmane.org>
next in thread | raw e-mail | index | archive | help
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix 486DRx2 (486-class CPU)
Origin = "CyrixInstead" DIR=0x2207 Stepping=2 Revision=2
real memory = 67108864 (64 MB)
avail memory = 56139776 (53 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: IRQ 13 interface
cpu0 on motherboard
eisa0: <EISA bus> on motherboard
mainboard0: <@@@0000 (System Board)> on eisa0 slot 0
eisa0: unknown card @@@0000 (0x00000000) at slot 1
eisa0: unknown card @@@0000 (0x00000000) at slot 2
eisa0: unknown card @@@0000 (0x00000000) at slot 3
eisa0: unknown card @@@0000 (0x00000000) at slot 4
eisa0: unknown card @@@0000 (0x00000000) at slot 5
eisa0: unknown card @@@0000 (0x00000000) at slot 6
eisa0: unknown card @@@0000 (0x00000000) at slot 7
eisa0: unknown card @@@0000 (0x00000000) at slot 8
eisa0: unknown card @@@0000 (0x00000000) at slot 9
isa0: <ISA bus> on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on
isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16450
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
aha1 at port 0x330-0x333 irq 11 drq 5 on isa0
aha1: AHA-1542CF FW Rev. B.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16
CCBs
aha1: [GIANT-LOCKED]
ed1: <D-Link DE-220P PnP ISA Card> at port 0x240-0x25f irq 5 on isa0
ed1: Ethernet address: 00:80:c8:da:a6:f0
ed1: type NE2000 (16 bit)
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
da0 at aha1 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
da1 at aha1 bus 0 target 1 lun 0
da1: <SEAGATE SX410800N 7116> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8)
da1: 8347MB (17096357 512 byte sectors: 64H 32S/T 8347C)
da2 at aha1 bus 0 target 2 lun 0
da2: <SEAGATE SX410800N 7117> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 8)
da2: 8347MB (17096357 512 byte sectors: 64H 32S/T 8347C)
cd0 at aha1 bus 0 target 6 lun 0
cd0: <SONY CD-ROM CDU-76S 1.1c> Removable CD-ROM SCSI-2 device
cd0: 5.000MB/s transfers (5.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Logical unit is
in process of becoming ready
So, my hotrodded 386 is now pushing 6.0b5. Unfortunatly I toasted it
pretty bad trying to move from 4.11 to 5.4, so it's a fresh install
that I'm scrambling to get re-setup.
One thing I noticed in this debacle, when I booted under 5-stable, my
SCSI card, AHA1 did not report as being stuck under the giant lock,
yet it is under 6.0b5? I'm hoping thats the cause of my throughput
regression. Under 4.11 I could sustain 1.4MB/sec writing to disc,
5-Stable held at 1.2MB/sec, I'm now down at 800KB/sec with 6.0b5. Are
all the debug options disabled in beta 5, or are they going to stay
until RC1?
Joshua Coombs
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?dic2gb$6cp$1>