Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Mar 2005 21:03:04 -0500
From:      "Constantine A. Murenin" <mureninc@gmail.com>
To:        freebsd-questions@freebsd.org
Subject:   healthd does not show the correct temperature
Message-ID:  <f34ca13c05032518036b0c6cf9@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
Hello, 

The healthd does not seem to show the correct temperature on my system. 

Right after the start-up, BIOS usually shows around 31 centigrade for
the motherboard and 21 for the processor. However, this is what the
healthdc is usually showing right after the start-up of the FreeBSD
after the start-up of the computer:

host.name 62.0 15.0 69.0 3096 0000 0000 1.46 1.50 3.31 5.03 11.86 -11.62 -4.80

Then after a few minutes of ideling, BIOS would show the temperature
of the processor at around 30 or 35. healthdc shows this:

host.name 72.0 38.0 70.5 3096 0000 0000 1.46 1.50 3.31 5.03 11.86 -11.62 -4.80

UPDATE: 
Above lines refer to the standard heatsink and Intel Pentium 1.8A
Northwood processor. Right now, as I have installed Zalman Fan Mate 1,
the healthd does not show the speed of the processors fan, while BIOS
still shows it at around 1500 rpm. He is what I get if I run `healthd
-d`:

%healthd -d
************************
* Hardware Information *
************************
WinBond Chip: W83627HF
************************

Temp.= 68.0, 51.5, 70.0; Rot.=    0,    0,    0
 Vcore = 1.46, 1.50; Volt. = 3.33, 5.03, 11.86, -11.62, -4.85
Temp.= 67.0, 51.5, 70.0; Rot.=    0,    0,    0
 Vcore = 1.46, 1.50; Volt. = 3.33, 5.03, 11.86, -11.62, -4.80
Temp.= 67.0, 51.5, 70.0; Rot.=    0,    0,    0
 Vcore = 1.46, 1.52; Volt. = 3.33, 5.03, 11.86, -11.62, -4.80
Temp.= 67.0, 51.5, 70.0; Rot.=    0,    0,    0
 Vcore = 1.46, 1.50; Volt. = 3.33, 5.03, 11.86, -11.62, -4.80

Thanks,
Constantine.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f34ca13c05032518036b0c6cf9>