Date: Wed, 08 Oct 2003 11:37:16 +0400 From: "Vladimir B. Grebenschikov" <vova@fbsd.ru> To: Soren Schmidt <sos@spider.deepcore.dk> Cc: "current@freebsd.org" <current@freebsd.org> Subject: Re: ATAng doesn't boot on my notebook - panic Message-ID: <1065598633.868.2.camel@localhost> In-Reply-To: <200310071926.h97JQ5eA004835@spider.deepcore.dk> References: <200310071926.h97JQ5eA004835@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
=D0=92 =D0=B2=D1=82, 07.10.2003, =D0=B2 23:26, Soren Schmidt =D0=BF=D0=B8=
=D1=88=D0=B5=D1=82:
> It seems Vladimir B. Grebenschikov wrote:
> > > Any solution or workaround ?
>=20
> Try this patch please:
>=20
> diff -u -r1.191 ata-all.c
Does not help, another panic in ad_attach:
...
GEOM: create disk ad1 dp=3D0xc2358a70
ad1: <MEMORYSTICK 4M 8K/SONY1.00> ATA-0 disk at ata1-master
ad1: 3MB (7904 sectors), 247 C, 2 H, 16 S, 512 B
ad1: 1 secs/int, 1 depth queue, BIOSPIO
Fatal trap 12: page fault while in kernel mode
fault virtual address =3D 0x6
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc047d801
stack pointer =3D 0x10:0xc0c21cf4
frame pointer =3D 0x10:0xc0c21d3c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 0 (swapper)
kernel: type 12 trap, code=3D0
Stopped at ad_attach+0x61: movzbl 0x6(%edi),%ecx
db> tra
ad_attach(c227d2d4,1,c1122c50,c074a990,c0c21d74) at ad_attach+0x61
ata_boot_attach(0,c0539736,c0768fec,0,c074a990) at ata_boot_attach+0x6f
run_interrupt_driven_config_hooks(0,0,c1120708,c1120708,c1ec00) at run_inte=
rrupt_driven_config_hooks+0x2b
mi_startup() at mi_startup+0xa1
begin() at begin+0x2c
db> =20
full boot -v:
OK boot -v
/boot/kernel.soren/acpi.ko text=3D0x3b43c data=3D0x16cc+0xee0 syms=3D[0x4+0=
x6480+0x4+0x7fb5]
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009f800
SMAP type=3D02 base=3D000000000009f800 len=3D0000000000000800
SMAP type=3D02 base=3D00000000000e7800 len=3D0000000000018800
SMAP type=3D01 base=3D0000000000100000 len=3D000000000bef0000
SMAP type=3D03 base=3D000000000bff0000 len=3D000000000000f800
SMAP type=3D04 base=3D000000000bfff800 len=3D0000000000000800
SMAP type=3D02 base=3D00000000fffe7800 len=3D0000000000018800
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #11: Wed Oct 8 03:00:25 MSD 2003
root@vbook.fbsd.ru:/usr/obj/usr/src/sys/VBOOK
Preloaded elf kernel "/boot/kernel.soren/kernel" at 0xc08a8000.
Preloaded elf module "/boot/kernel.soren/ums.ko" at 0xc08a8208.
Preloaded elf module "/boot/kernel.soren/usb.ko" at 0xc08a82b8.
Preloaded elf module "/boot/kernel.soren/ukbd.ko" at 0xc08a8368.
Preloaded elf module "/boot/kernel.soren/snd_neomagic.ko" at 0xc08a8418.
Preloaded elf module "/boot/kernel.soren/snd_pcm.ko" at 0xc08a84d0.
Preloaded elf module "/boot/kernel.soren/acpi.ko" at 0xc08a8584.
Calibrating clock(s) ... i8254 clock: 1193111 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 331580921 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (331.58-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x66a Stepping =3D 10
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 201261056 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000bc69fff, 184827904 bytes (45124 pages)
avail memory =3D 185966592 (177 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c50
bios32: Entry =3D 0xfd7c0 (c00fd7c0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd7c0+0x214
pnpbios: Found PnP BIOS data at 0xc00f6c80
pnpbios: Entry =3D f0000:b5d4 Rev =3D 1.0
Other BIOS signatures found:
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY Z0 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003b54
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D7192808=
6)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 9
embedded 0 1 B 0x61 9
embedded 0 1 C 0x62 9
embedded 0 1 D 0x63 9
embedded 0 7 D 0x63 9
embedded 0 8 A 0x60 9
embedded 0 8 B 0x61 9
embedded 0 9 A 0x62 9
embedded 0 10 A 0x61 9
embedded 0 11 A 0x60 9
embedded 0 6 A 0x60 9
AcpiOsDerivePciId: bus 0 dev 7 func 2
AcpiOsDerivePciId: bus 0 dev 10 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min =3D 2, max =3D 8, width =3D 6
ACPI timer looks BAD min =3D 2, max =3D 8, width =3D 6
ACPI timer looks BAD min =3D 2, max =3D 8, width =3D 6
ACPI timer looks BAD min =3D 3, max =3D 16777202, width =3D 16777199
ACPI timer looks BAD min =3D 3, max =3D 8, width =3D 5
ACPI timer looks BAD min =3D 3, max =3D 9, width =3D 6
ACPI timer looks BAD min =3D 2, max =3D 8, width =3D 6
ACPI timer looks BAD min =3D 0, max =3D 8, width =3D 8
ACPI timer looks BAD min =3D 3, max =3D 8, width =3D 5
ACPI timer looks BAD min =3D 3, max =3D 8, width =3D 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.9.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
---- before setting priority for links ------------
\_SB_.LNKC:
interrupts: 9
penalty: 710
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.LNKC:
interrupts: 9
penalty: 710
references: 1
priority: 710
---- after fixup boot-disabled links --------------
\_SB_.LNKC:
interrupts: 9
penalty: 710
references: 1
priority: 710
---- arbitrated configuration ---------------------
\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.7.3
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.8.0
\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.9.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.10.0
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.11.0
\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.8.1
\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base 00000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0xa200, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n=
s)
map[10]: type 1, range 32, base fecff000, size 12, enabled
map[14]: type 4, range 32, base 0000fcc0, size 6, enabled
map[18]: type 1, range 32, base fed00000, size 20, enabled
pcib0: matched entry for 0.6.INTA (source \_SB_.LNKA)
pcib0: slot 6 INTA is routed to irq 9
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08
bus=3D0, slot=3D6, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0013, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (=
14000 ns)
intpin=3Da, irq=3D9
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
bus=3D0, slot=3D7, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n=
s)
map[20]: type 4, range 32, base 0000fc60, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n=
s)
intpin=3Dd, irq=3D9
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02
bus=3D0, slot=3D7, func=3D3
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fe400000, size 22, enabled
map[18]: type 1, range 32, base feb00000, size 20, enabled
pcib0: matched entry for 0.8.INTA (source \_SB_.LNKA)
pcib0: slot 8 INTA is routed to irq 9
found-> vendor=3D0x10c8, dev=3D0x0005, revid=3D0x20
bus=3D0, slot=3D8, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x10 (4000 ns), maxlat=3D0xff (=
63750 ns)
intpin=3Da, irq=3D9
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base fe000000, size 22, enabled
map[14]: type 1, range 32, base fea00000, size 20, enabled
pcib0: matched entry for 0.8.INTB (source \_SB_.LNKB)
pcib0: slot 8 INTB is routed to irq 9
found-> vendor=3D0x10c8, dev=3D0x8005, revid=3D0x20
bus=3D0, slot=3D8, func=3D1
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0002, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D9
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base fecfec00, size 9, memory disabled
found-> vendor=3D0x104d, dev=3D0x8009, revid=3D0x01
bus=3D0, slot=3D9, func=3D0
class=3D0c-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n=
s)
intpin=3Da, irq=3D255
powerspec 1 supports D0 D3 current D0
found-> vendor=3D0x1180, dev=3D0x0475, revid=3D0x00
bus=3D0, slot=3D10, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fece0000, size 16, memory disabled
map[14]: type 4, range 32, base 0000fca8, size 3, port disabled
found-> vendor=3D0x127a, dev=3D0x2005, revid=3D0x01
bus=3D0, slot=3D11, func=3D0
class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n=
s)
intpin=3Da, irq=3D255
powerspec 2 supports D0 D3 current D3
pci0: <network, ethernet> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcb0-0xfcbf at device 7.1 o=
n pci0
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA=
_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f irq 9 a=
t device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse=E2=95=9D Explorer, rev 1.10/1.14, ad=
dr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, add=
r 4, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums1: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr=
4, iclass 3/1
ums1: 3 buttons
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq =
9 at device 7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 8000=20
pci0: <display, VGA> at device 8.0 (no driver attached)
pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq =
9 at device 8.1 on pci0
pcm0: buftop is 0x0027ec00
pcm0: buftop is changed to 0x0027ec00
pcm0: <Asahi Kasei AK4542 AC97 Codec (id =3D 0x414b4d01)>
pcm0: Codec features headphone, 5 bit master volume, AKM 3D Audio
pcm0: rec buf 0xcbcf7c00
pcm0: play buf 0xcbcf3c00
pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached)
pci0: <simple comms> at device 11.0 (no driver attached)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 53 02 14
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x201 0x601 0x201 0x201
sio1 port 0x140-0x147,0x3e8-0x3ef irq 10 drq 0 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
ed0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 331580921 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default t=
o deny, logging unlimited
DUMMYNET initialized (011031)
ata1: spurious interrupt - status=3D0x50 error=3D0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ad0: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=3D0xc22daa70
ad0: <TOSHIBA MK4019GAX/FA002D> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:00 typ:6 s(CHS):0/1/1 e(CHS):969/239/63 s:63 l:14666337
[1] f:00 typ:160 s(CHS):970/0/1 e(CHS):996/239/63 s:14666400 l:408240
[2] f:80 typ:165 s(CHS):997/0/1 e(CHS):1023/239/63 s:15074640 l:41942880
[3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/239/63 s:57017520 l:21122640
GEOM: Configure ad0s1, start 32256 length 7509164544 end 7509196799
GEOM: Configure ad0s2, start 7509196800 length 209018880 end 7718215679
GEOM: Configure ad0s3, start 7718215680 length 21474754560 end 29192970239
GEOM: Configure ad0s4, start 29192970240 length 10814791680 end 40007761919
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s3c, start 0 length 21474754560 end 21474754559
GEOM: Configure ad0s3e, start 402653184 length 6442450944 end 6845104127
GEOM: Configure ad0s3f, start 6845104128 length 14629650432 end 21474754559
GEOM: Configure ad0s4c, start 0 length 10814791680 end 10814791679
GEOM: Configure ad0s4e, start 0 length 134217728 end 134217727
GEOM: Configure ad0s4f, start 134217728 length 8915517440 end 9049735167
ata1-master: pio=3D0x09 wdma=3D0xffffffff udma=3D0xffffffff cable=3D40pin
ad1: FAILURE - SETFEATURES status=3D51<READY,DSC,ERROR> error=3D4<ABORTED>
ad1: FAILURE - SETFEATURES status=3D51<READY,DSC,ERROR> error=3D4<ABORTED>
ad1: FAILURE - SETFEATURES status=3D51<READY,DSC,ERROR> error=3D4<ABORTED>
ad1: FAILURE setting PIO1 on Intel PIIX4 chip
GEOM: create disk ad1 dp=3D0xc2358a70
ad1: <MEMORYSTICK 4M 8K/SONY1.00> ATA-0 disk at ata1-master
ad1: 3MB (7904 sectors), 247 C, 2 H, 16 S, 512 B
ad1: 1 secs/int, 1 depth queue, BIOSPIO
Fatal trap 12: page fault while in kernel mode
fault virtual address =3D 0x6
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc047d801
stack pointer =3D 0x10:0xc0c21cf4
frame pointer =3D 0x10:0xc0c21d3c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 0 (swapper)
kernel: type 12 trap, code=3D0
Stopped at ad_attach+0x61: movzbl 0x6(%edi),%ecx
db> tra
ad_attach(c227d2d4,1,c1122c50,c074a990,c0c21d74) at ad_attach+0x61
ata_boot_attach(0,c0539736,c0768fec,0,c074a990) at ata_boot_attach+0x6f
run_interrupt_driven_config_hooks(0,0,c1120708,c1120708,c1ec00) at run_inte=
rrupt_driven_config_hooks+0x2b
mi_startup() at mi_startup+0xa1
begin() at begin+0x2c
db> =20
> -S=C3=B8ren
--=20
Vladimir B. Grebenschikov <vova@fbsd.ru>
SWsoft Inc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1065598633.868.2.camel>