Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Jun 2000 09:23:48 -0700 (PDT)
From:      Chris Angell <chris@snark.wizard.com>
To:        questions@FreeBSD.ORG
Subject:   Startup
Message-ID:  <Pine.BSF.4.21.0006190917380.50252-100000@snark.wizard.com>

next in thread | raw e-mail | index | archive | help
Upon startup, I see this error occur:

I have attached all of the output of 'dmesg' just to be safe.  Also, I
recompiled a new kernel yesterday.  I bet this has something to do with
it.

Thanks!


Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000307-CURRENT #0: Tue Jun 13 09:12:30 PDT 2000
    root@chris.wizard.com:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 166194122 Hz
CPU: Pentium/P55C (166.19-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 134217728 (131072K bytes)
config> di psm0
No such device: psm0
Invalid command or syntax.  Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax.  Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax.  Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax.  Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax.  Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax.  Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 127041536 (124064K bytes)
Preloaded elf kernel "kernel" at 0xc02f2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f209c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0x9000-0x900f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 8.0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <PnP Sound Chip> at port 0x220-0x22f irq 5 drq 1,0 on isa0
unknown1: <PnP Sound Chip> at port 0x388-0x38f on isa0
unknown2: <PnP Sound Chip> at port 0x200-0x207 on isa0
unknown3: <PnP Sound Chip> at port 0x330-0x331 irq 9 on isa0
ad1: 2014MB <WDC AC22100H> [4092/16/63] at ata0-slave using WDMA2
acd0: CDROM <MATSHITA CR-585> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad1s1a



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 Christopher Angell	    |  Chris@Wizard.Com	
 2001 S. Jones Blvd Suite K |  http://www.wizard.com
 Las Vegas NV  89146        |  1-702-317-2001
 1-800-851-4161		    |  Fax 702-317-2057 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0006190917380.50252-100000>