Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 4 Feb 2013 17:05:31 +0100
From:      Christian Gusenbauer <c47g@gmx.at>
To:        John Baldwin <jhb@freebsd.org>
Cc:        freebsd-fs@freebsd.org, yongari@freebsd.org
Subject:   [SOLVED] Re: 9.1-stable crashes while copying data from a NFS mounted directory
Message-ID:  <201302041705.31461.c47g@gmx.at>
In-Reply-To: <201301241721.51102.jhb@freebsd.org>
References:  <201301241805.57623.c47g@gmx.at> <20130124212212.GM2522@kib.kiev.ua> <201301241721.51102.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 24 January 2013 23:21:50 John Baldwin wrote:
> On Thursday, January 24, 2013 4:22:12 pm Konstantin Belousov wrote:
> > On Thu, Jan 24, 2013 at 09:50:52PM +0100, Christian Gusenbauer wrote:
> > > On Thursday 24 January 2013 20:37:09 Konstantin Belousov wrote:
> > > > On Thu, Jan 24, 2013 at 07:50:49PM +0100, Christian Gusenbauer wrote:
> > > > > On Thursday 24 January 2013 19:07:23 Konstantin Belousov wrote:
> > > > > > On Thu, Jan 24, 2013 at 08:03:59PM +0200, Konstantin Belousov 
wrote:
> > > > > > > On Thu, Jan 24, 2013 at 06:05:57PM +0100, Christian Gusenbauer 
wrote:
> > > > > > > > Hi!
> > > > > > > > 
> > > > > > > > I'm using 9.1 stable svn revision 245605 and I get the panic
> > > > > > > > below if I execute the following commands (as single user):
> > > > > > > > 
> > > > > > > > # swapon -a
> > > > > > > > # dumpon /dev/ada0s3b
> > > > > > > > # mount -u /
> > > > > > > > # ifconfig age0 inet 192.168.2.2 mtu 6144 up
> > > > > > > > # mount -t nfs -o rsize=32768 data:/multimedia /mnt
> > > > > > > > # cp /mnt/Movies/test/a.m2ts /tmp
> > > > > > > > 
> > > > > > > > then the system panics almost immediately. I'll attach the
> > > > > > > > stack trace.
> > > > > > > > 
> > > > > > > > Note, that I'm using jumbo frames (6144 byte) on a 1Gbit
> > > > > > > > network, maybe that's the cause for the panic, because the
> > > > > > > > bcopy (see stack frame #15) fails.
> > > > > > > > 
> > > > > > > > Any clues?
> > > > > > > 
> > > > > > > I tried a similar operation with the nfs mount of rsize=32768
> > > > > > > and mtu 6144, but the machine runs HEAD and em instead of age.
> > > > > > > I was unable to reproduce the panic on the copy of the 5GB
> > > > > > > file from nfs mount.
> > > > > 
> > > > > Hmmm, I did a quick test. If I do not change the MTU, so just
> > > > > configuring age0 with
> > > > > 
> > > > > # ifconfig age0 inet 192.168.2.2 up
> > > > > 
> > > > > then I can copy all files from the mounted directory without any
> > > > > problems, too. So it's probably age0 related?
> > > > 
> > > > From your backtrace and the buffer printout, I see somewhat strange
> > > > thing. The buffer data address is 0xffffff8171418000, while kernel
> > > > faulted at the attempt to write at 0xffffff8171413000, which is is
> > > > lower then the buffer data pointer, at the attempt to bcopy to the
> > > > buffer.
> > > > 
> > > > The other data suggests that there were no overflow of the data from
> > > > the server response. So it might be that mbuf_len(mp) returned
> > > > negative number ? I am not sure is it possible at all.
> > > > 
> > > > Try this debugging patch, please. You need to add INVARIANTS etc to
> > > > the kernel config.
> > > > 
> > > > diff --git a/sys/fs/nfs/nfs_commonsubs.c
> > > > b/sys/fs/nfs/nfs_commonsubs.c index efc0786..9a6bda5 100644
> > > > --- a/sys/fs/nfs/nfs_commonsubs.c
> > > > +++ b/sys/fs/nfs/nfs_commonsubs.c
> > > > @@ -218,6 +218,7 @@ nfsm_mbufuio(struct nfsrv_descript *nd, struct
> > > > uio *uiop, int siz) }
> > > > 
> > > >  				mbufcp = NFSMTOD(mp, caddr_t);
> > > >  				len = mbuf_len(mp);
> > > > 
> > > > +				KASSERT(len > 0, ("len %d", len));
> > > > 
> > > >  			}
> > > >  			xfer = (left > len) ? len : left;
> > > >  
> > > >  #ifdef notdef
> > > > 
> > > > @@ -239,6 +240,8 @@ nfsm_mbufuio(struct nfsrv_descript *nd, struct
> > > > uio *uiop, int siz) uiop->uio_resid -= xfer;
> > > > 
> > > >  		}
> > > >  		if (uiop->uio_iov->iov_len <= siz) {
> > > > 
> > > > +			KASSERT(uiop->uio_iovcnt > 1, ("uio_iovcnt %d",
> > > > +			    uiop->uio_iovcnt));
> > > > 
> > > >  			uiop->uio_iovcnt--;
> > > >  			uiop->uio_iov++;
> > > >  		
> > > >  		} else {
> > > > 
> > > > I thought that server have returned too long response, but it seems
> > > > to be not the case from your data. Still, I think the patch below
> > > > might be due.
> > > > 
> > > > diff --git a/sys/fs/nfsclient/nfs_clrpcops.c
> > > > b/sys/fs/nfsclient/nfs_clrpcops.c index be0476a..a89b907 100644
> > > > --- a/sys/fs/nfsclient/nfs_clrpcops.c
> > > > +++ b/sys/fs/nfsclient/nfs_clrpcops.c
> > > > @@ -1444,7 +1444,7 @@ nfsrpc_readrpc(vnode_t vp, struct uio *uiop,
> > > > struct ucred *cred, NFSM_DISSECT(tl, u_int32_t *, NFSX_UNSIGNED);
> > > > 
> > > >  			eof = fxdr_unsigned(int, *tl);
> > > >  		
> > > >  		}
> > > > 
> > > > -		NFSM_STRSIZ(retlen, rsize);
> > > > +		NFSM_STRSIZ(retlen, len);
> > > > 
> > > >  		error = nfsm_mbufuio(nd, uiop, retlen);
> > > >  		if (error)
> > > >  		
> > > >  			goto nfsmout;
> > > 
> > > I applied your patches and now I get a
> > > 
> > > panic: len -4
> > > cpuid = 1
> > > KDB: enter: panic
> > > Dumping 377 out of 6116
> > > MB:..5%..13%..22%..34%..43%..51%..64%..73%..81%..94%
> > 
> > This means that the age driver either produced corrupted mbuf chain,
> > or filled wrong negative value into the mbuf len field. I am quite
> > certain that the issue is in the driver.
> > 
> > I added the net@ to Cc:, hopefully you could get help there.
> 
> And I've cc'd Pyun who has written most of this driver and is likely the
> one most familiar with its handling of jumbo frames.

Hi All!

I was in contact with Pyun. We quickly found out that it is indeed a driver 
problem. Pyun solved it and will commit the fix within the next few days.

There's only one (minor) problem open, which I can not tell if it really is 
one: Konstantin sent me an initial patch for the NFS code where he added an 
KASSERT(uiop->uio_iovcnt > 1) which triggers even with Pyun's fix. Without 
that assert my tests show now problem at all. So is this a problem?

Thanks guys (especially Pyun) for helping & fixing!

Ciao,
Christian.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302041705.31461.c47g>