Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Jan 2004 11:31:58 -0800 (PST)
From:      peter lageotakes <plageotakes@yahoo.com>
To:        FreeBSD-questions <freebsd-questions@freebsd.org>
Subject:   Re: How do I add a third ATA controller to 4.8?
Message-ID:  <20040112193158.96101.qmail@web14608.mail.yahoo.com>
In-Reply-To: <p06020426bc2899be5147@[10.0.2.2]>

next in thread | previous in thread | raw e-mail | index | archive | help

--- Paul Hoffman <phoffman@proper.com> wrote:
> At 9:20 AM +0000 1/12/04, Martyn Hill wrote:
> >Paul
> >
> >I notice that the kernel config file you present is
> using the "old" device
> >ata lines - is the ATA controller a particularly
> old model?
> >
> >If not, then the LINT kernel config file shows an
> alternative, viz
> >
> >device    ata            # just one entry for all
> ata controllers, no need
> >to reference IRQs etc...
> >device    atadisk        # for your IDE disks
> >device    atapicd        # for your CD-ROM like
> devices
> >
> >You should comment out the ata0/ata1 lines before
> adding the above (and
> >additionally, remove any "device wd*" lines in that
> section.)
> >
> >Then rebuild your kernel.
> >
> >Hope that helps.
> 
> Thanks to all for the effort, but it didn't. The
> dmesg output still 
> shows only ata0 and ata1. I am starting to believe
> that the problem 
> lies in the Dell, not in FreeBSD.
> 
> I'll work around this by attaching the drive to the
> second IDE 
> controller and later experiment with adding a third
> controller on the 
> PCI bus.
> 
> --Paul Hoffman
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
>
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
"freebsd-questions-unsubscribe@freebsd.org"

There seems to be a PR associated with the ATA
controller (PR 54549).
http://www.freebsd.org/cgi/query-pr.cgi?pr=54549

I have had a similar problem trying to get FreeBSD
(4.9) installed.  Unfortunately, I don't remember how
I got it installed on the 600sc.  However, I do
remember one thing: going into /stand/sysinstall will
cause the system to lock (panic). 

Currently its running something else other than
FreeBSD :-(

Hope this helps,
Pete


__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040112193158.96101.qmail>